VeriFone T650T User manual

Verifone Part Number DOC560-030-EN-A, Revision A
T650T
Installation Guide

All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written
permission of Verifone, Inc.
The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure the
accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are
for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program
before placing the software into productive use. This document, including without limitation the examples and software programs, is
supplied “As-Is.”
Verifone, Inc.
1-800-Verifone
www.verifone.com
Verifone Part Number DOC560-030-EN-A, Revision A
T650T Installation Guide
© 2021 Verifone, Inc.
Verifone and the Verifone logo are registered trademarks of Verifone. Other brand names or trademarks associated with Verifone’s
products and services are trademarks of Verifone, Inc.
All other brand names and trademarks appearing in this manual are the property of their respective holders.
Product Warranty:
For product warranty information, go to http://www.verifone.com/terms.
Comments? Please e-mail all comments on this document to your local Verifone Support Team.

T650T INSTALLATION GUIDE 3
CONTENTS
PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Conventions and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CHAPTER 1
Device Overview Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Exceptional Ease of Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Performance and Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contactless Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Communication Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CHAPTER 2
Device Setup Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contactless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Inside the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Device Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connection Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting Cables and Other Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SAM CARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Removing the Battery Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing or Replacing SIM/SAM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Initial Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Starting Up and Shutting Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Charging via the Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Charging with the Folio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Examining Connection Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To Connect the Terminal to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Manual Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Manual Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Loading a Paper Roll in Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CTLS Transaction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Camera/QR Code Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Wi-Fi/BT Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Bluetooth Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Wireless Transaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

CONTENTS
4T650T INSTALLATION GUIDE
External and Optional Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CHAPTER 3
Specifications Power Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SAM Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Integrated Contactless Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Audio Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
CHAPTER 4
Maintenance and
Cleaning
General Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Additional Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Surface Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Smart Card Reader Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Magnetic Stripe Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CHAPTER 5
Verifone Service
and Support
Returning a Device for Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
CHAPTER 6
Troubleshooting
Guidelines
Device Does Not Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Device Display Does Not Show Correct/Readable Info . . . . . . . . . . . . . . . . . . . 37
Blank Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Transactions Fail To Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

T650T INSTALLATION GUIDE 5
PREFACE
This guide is your primary source of information for setting up T650Tdevice.
Audience
This guide is useful for anyone installing the T650T device.
Organization
This guide is organized as follows:
Chapter 1, Device Overview. Provides an overview of the T650T device.
Chapter 2, Device Setup. Explains how to set up the T650T device. It tells you
how to select a location and establish power connection.
Chapter 3, Specifications. Discusses power requirements and dimensions of the
T650T device.
Chapter 4, Maintenance and Cleaning. Explains how to maintain your T650T.
Chapter 5, Verifone Service and Support. Provides information on how to contact
your local Verifone representative or service provider, and information on how to
order accessories or documentation from Verifone.
Chapter 6, Troubleshooting Guidelines. Provides troubleshooting guidelines,
should you encounter a problem during the device installation.
Related
Documentation
To learn more about the T650T, refer to the following set of documents:
T650T Certifications and Regulations VPN -DOC560-031-EN-A
T650T Quick Installation Guide VPN -DOC560-032-EN-A

PREFACE
Conventions and Acronyms
6T650T INSTALLATION GUIDE
Conventions and
Acronyms
This section describes the conventions and acronyms used in this guide.
Various conventions are used to help you quickly identify special formatting.
Table 1 describes these conventions and provides examples of their use.
Various acronyms are used in place of the full definition. Table 2 presents
acronyms and their definitions.
Table 1 Document Conventions
Convention Meaning Example
Blue Text in blue indicates terms that
are cross referenced.
See Conventions and Acronyms.
Italics Italic typeface indicates book
titles or emphasis.
You must install a roll of thermal-
sensitive paper in the printer.
Courier The courier type face is used
while specifying onscreen text,
such as text that you would
enter at a command prompt, or
to provide an URL.
http://www.verifone.com
The pencil icon is used to
highlight important information.
RS-232-type devices do not work
with the PINpad port.
The caution symbol indicates
possible hardware or software
failure, or loss of data.
The device is not waterproof or
dustproof and is intended for indoor
use only.
The lightning symbol is used as
a warning when bodily injury
might occur.
Due to risk of shock do not use the
device near water.
Table 2 Acronym Definitions
Acronym Definitions
AC Alternating Current
ARM Acorn RISC Machine
EMV Europay MasterCard and VISA
LCD Liquid Crystal Display
NFC Near Field Communication
MRA Merchandise Return Authorization
PCI Payment Card Industry
PED PIN Entry Device
PSAM Purchase Security Application Module
PIN Personal Identification Number
USB Universal Serial Bus
VPN Verifone Part Number
NOTE
CAUTION
WARNING

T650T INSTALLATION GUIDE 7
CHAPTER 1
Device Overview
The Verifone T650T device is a powerful countertop device, 4G LTE, provides a
dedicated cellular IP connection with strong battery backup, ensures
uninterrupted transaction flow in the event of power failure.
It is a single integrated hardware and software solution to drive booking
applications, navigation application, VoIP, card payment acceptance, APMs, and
an integrated printer. The Verifone T650T device is available with a dedicated DC
Car PSU eliminating the need for a battery. The embedded power and data
connectors, and the integrated cable management, make a seamless hand over
from driver to rider.
The Verifone T650T device supports all payment methods - magnetic stripe, EMV,
and NFC/Contactless Reader, including Apple Pay, Google Pay and Samsung
Pay mobile wallets. The easy to read color touch screen supports all payment
related user interactions and keypad for secure PIN entry. The Verifone T650T
device has two variants, 4G LTE + WiFi + with Battery and 4G LTE + WiFi +
without Battery.
In combination with Verifone Connect digital services, T650T device has the ability
to run Android applications, like loyalty and inventory. It also enables clients to
remotely monitor and update their device using Verifone’s estate management
solution. The T650T device supports Bluetooth and Wi-Fi and meets PCI-PTS 6.x
SRED requirements for maximum security. This chapter provides a brief
description of the T650T.
Figure 1 T650T Device

DEVICE OVERVIEW
8T650T INSTALLATION GUIDE
Key Features and Benefits
Processor •Cortex A7 Quad Core, 1.1GHz
•(QCOM 8909)
Memory •2 GB RAM/16 GB ROM or 1 GB RAM/8 GB ROM
•64 GB Micro-SD
Display •5.5" (1280 × 720) HD IPS LCD touchscreen
•Screen rotation
Keypad •On-screen, Navigation possible
Payment •MSR
•SCR
•CTLS
•QR Code
Multimedia •Speaker and audio jack
•Integrated microphone
•Video HD
•Video Decode
Communication •Bluetooth 4.2 BLE
•2.4 GHz + 5 GHz
•802.11 a, b, g, n
Physical Interface •2 USB ports
•Serial port (RS232)
•Ethernet port
•USB-C OTG port
•USB-A Host port
Camera/Barcode
Scan
•0.3 MP (Front camera)
•5.0 MP (Rear camera)
•QR/Barcode Scanner
Dimensions •Length: 211 mm
•Width: 84 mm
•Height: 72 mm
•Weight: 456 g

DEVICE OVERVIEW
Features and Benefits
T650T INSTALLATION GUIDE 9
Features and
Benefits
Following are the features and benefits.
Exceptional Ease of
Use
•Large 5.5” LCD display for unlimited application possibilities and easy
readability under various lighting conditions.
•Touchscreen for icon-based applications or electronic signature capture
support.
•Magnetic stripe card reader for optimal card reading.
•Audio jack to facilitate accessibility for the visually impaired.
Performance and
Durability
•Fast transactions due to powerful ARM Cortex A7 1.1 GHz quad-core
processor.
•Rounded corners and drop resistant to less than 1m on concrete floor to
minimize breakage.
Security •PCI PTS 6.x-approved
•SRED
•Supports AES DUKPT
Power Supply •Input: AC 110V~240V/50~60Hz/0.3A
•Output: DC 9V/2.5A
SIM/SAM •SIM x 1
•SAM x 1
•SIM/SAM x 1
Card Reader •Triple track MSR
•EMV L1-approved Smart card
•ISO (International Standard) 7810, 7811, 7813 Smart card
reader
•NFC/CTLS
Environmental •Operating temperature: -10° to 50° C (14° to 122° F)
•Storage temperature: -20° to 70° C (-4° to 158° F)
•Relative humidity: 10% to 90%
•Non-condensing
Printer Built-in high-speed thermal printer with print speed greater than
25 lines per second, support paper roll with a width of 58mm
and diameter of 50mm, support black mark positioning.
LEDs •4 CTLS Indicator
•Power Indicator
- Red = charging indicator
- Green = fully charged indicator

DEVICE OVERVIEW
Features and Benefits
10 T650T INSTALLATION GUIDE
•High-capacity lithium-ion battery pack (7.4V/1000mAh with Maxell
ICP425262AHR battery cell) that easily supports a full 12-hour business day
on a single charge.
•2GB RAM/16GB ROM, SD card slot size that supports up to 64GB SD
memory.
Security •Incorporates tamper-sensing circuitry to detect unauthorized intrusion and
supports a broad spectrum of software-based security features.
•PCI-PTS 6.x approved for debit and other PIN-based transactions.
•EMV Level 1 Type approval.
•Supports reliable security features including TLS, VeriShield file,
authentication and VeriShield Protect to help prevent fraud and other
intrusions.
Contactless
Capability
•Advanced contactless architecture that future-proofs investment with a single
contactless interface (SingleCl), SoftSAMs, and side-by-side application
architecture.
•Dedicated tap zone for optimized user experience.
•Accepts EMV, NFC, QR Code and mag-stripe contactless payments as well as
PIN-based transactions.
Communication
Technology
•Bluetooth: Simple, plug-and-play installation for locations that need short-
range wireless capability. Eddystone and iBeacon profiles are also supported.
•Dual band Wi-Fi.
Connectivity •4G LTE/WiFi; 5 GHz + 2.4 GHz/Bluetooth
•Ethernet, USB-C/ USB-A/ serial RS-232

T650T INSTALLATION GUIDE 11
CHAPTER 2
Device Setup
This chapter describes the setup procedure. You will learn about:
•Environmental Factors
•PIN Protection Measures
•Inside the Shipping Carton
•Device Features
•Removing the Battery Cover
•Installing or Replacing SIM/SAM Card
•Initial Battery Charging
•Starting Up and Shutting Down
•Using the Battery
•Examining Connection Port
•Loading a Paper Roll in Device
•Using the Smart Card Reader
•Using the Magnetic Card Reader
•CTLS Transaction
Environmental
Factors
•Do not use the device where there is excess heat, dust, humidity, moisture,
caustic chemicals or oils.
•Keep the device away from direct sunlight and anything that radiates heat.
Contactless
Considerations
Avoid having metallic objects in proximity of the contactless antenna. If you need
to mount the device onto a vertical or inclined surface, use Verifone approved
stand.
PIN Protection
Measures
Use the following techniques to provide effective screening of the PIN-entry
keypad during the PIN entry process. You can use these methods in combination,
although in some cases a single method might suffice.
•Position the device on the check-in stand in such a way as to block visual
observation of the PIN-entry process. Examples include:
CAUTION
Using an enclosed metal frame or mount may negatively affect contactless
performance.

DEVICE SETUP
Inside the Shipping Carton
12 T650T INSTALLATION GUIDE
•Visual shields designed into the check-in stand. The shields may be solely
for shielding purposes or may be part of the general check-in stand design.
•Position the angle of the device in such a way that PIN spying is difficult.
•Install the PED on an adjustable stand that allows consumers to swivel the
device sideways and/or tilt it forward/backward to a position that makes visual
observation of the PIN-entry process difficult.
•Position in-store security cameras so that the PIN-entry keypad is not visible.
Verifone also recommends instructing the cardholder regarding safe PIN-entry.
This can be done with a combination of:
•Signage on the PED
•Prompts on the display, possibly with a click-through screen
•Literature at the point of sale
•A logo for safe PIN-entry process
Inside the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The device is a secure product. Tampering causes it to
cease to function or to operate in an unsecured manner.
Unpacking the
Shipping Carton To unpack the shipping carton:
1Carefully inspect the shipping carton and its contents for possible tampering or
damage.
2Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
3Remove and inspect the contents of the shipping carton. The device ships in
multiple configurations, the carton may include all or any of the following:
•Device with Battery/without Battery variant
•Connectivity cable
•Paper roll
•Additional accessories (optional)
4Remove all plastic wrapping from the device and components.
5Remove the clear protective film from the display.
6Inspect the terminal for possible tampering; see how to identify signs of
tampering in section Periodic Inspection.
NOTE
Power supply and connectivity cables are shipped separately or depending on
the customer requirements.

DEVICE SETUP
Device Features
T650T INSTALLATION GUIDE 13
7Save the shipping carton and packing material for future repacking or moving
of the device.
Periodic Inspection Periodically inspect the terminal for possible tampering. Signs of tampering
include:
•Overlays in the PIN pad area
•Wires protruding out of the device
•Foreign objects inserted into the smart card slot or magnetic stripe slot
•Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side
•Signs of damage to the tamper-evident labels
•A Tamper Warning message on the device display
If any device is found to have been tampered with, please remove it from service
immediately, keep it available for potential forensics investigation, and notify your
company security officer and your local Verifone representative or service
provider. To contact Verifone, please see Verifone Service and Support.
Device Features
Familiarize yourself with the features before continuing with the installation
process.
Figure 2 T650T (Front Panel)
Front Panel
The front panel offers the following features:
•The T650T device has a colored touch screen display.
WARNING
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.

DEVICE SETUP
Connection Ports
14 T650T INSTALLATION GUIDE
•A smart card reader is built into the front of the device to process smart card-
based debit or credit transactions. For directions on how to use a smart card,
see Using the Smart Card Reader.
•A magnetic card reader is built into the device for performing debit or credit
card transactions. The card can be swiped in either direction. To ensure a
proper read of the magnetic swipe card, insert the magnetic card from the side
of the device as shown in Figure 14.
•Contactless Reader and EMV have dedicated LEDs lower to the left of the
display for contactless payments. For directions on how to perform contactless
transactions, see Using the Contactless Reader.
•A 3.5 mm audio jack to facilitate accessibility for the visually impaired.
Connection
Ports
The device has dedicated input/output connectors: Ethernet, RS-232, USB-A,
USB-C and DC power.
Connecting Cables
and Other Devices
To connect required cables and other devices:
1Remove cable cover as shown below.
Figure 3 Removing Cable Cover

DEVICE SETUP
SAM CARD
T650T INSTALLATION GUIDE 15
Connect required cables or optional devices. Cable is connected on the Rear of
the Unit.
Figure 4 Connecting the Cable
SAM CARD
When you first receive your T650T device, you may need to install one or more
SAM cards, or you may need to replace old cards. You may need to install one or
two Multiple Security Access Module cards or replace an old one.
NOTE
Route the cable through the cable cover first, as shown in the picture.
CAUTION
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharge can damage the equipment. Verifone recommends using a
grounded anti-static wrist strap.
NOTE
Verifone ships variants of the T650T device for different markets. Your unit may
have different options or accessories described in this section.

DEVICE SETUP
Removing the Battery Cover
16 T650T INSTALLATION GUIDE
Removing the
Battery Cover
Remove the battery cover to access the battery as well as the SIM and SAM slots.
1Turn off the device.
2Place the device upside down on a soft, clean surface to protect the screen
from scratches.
3If installed, loosen the retaining screw.
Press and slide the battery cover, away from the magnetic card reader.
Figure 5 Removing the Battery Cover
Installing or
Replacing SIM/
SAM Card
To install or replace SIM/SAM cards:
1Power off the device.
2Place the device face down on a soft and clean surface.
3Remove the cable cover of the unit.
4Insert the SIM/SAM cards. Carefully slide the cards one at a time into the slots
until fully inserted. The correct orientation of the SIM/SAM card is as indicated
in figure 5.
5Close the cable cover.

DEVICE SETUP
Initial Battery Charging
T650T INSTALLATION GUIDE 17
Figure 6 SAM Insertion
To replace SIM/SAM card, gently slide out the old SIM/SAM card before
inserting a new one.
Initial Battery
Charging
After unpacking your T650T device, connect the power pack to the unit for eight
hours or until fully charged.
The battery has a safety circuit to protect the Li-ion cells from overcharging and
over-discharging. If the battery is over-discharged, the safety circuit shuts down
the battery. The battery must then be recharged to restore operation.
Starting Up and
Shutting Down
The T650T device starts up differently depending on how it is powered ON.
•The device starts up automatically when the T650T is connected to a non-
battery power source, regardless of the battery charge state.
•To manually power up, hold the green key down for about 4 seconds until the
device displays the startup screen.
The device lights up once the power is on.
4G SIM
TF /uSD
NOTE
Position the card’s gold contacts facing downward towards the user. The card
slot in the device has a set of contacts. The SAM card has a notch on one corner
to ensure that it fits into the connector base in only one way.
NOTE
The 4-second power-up delay prevents device startup if the green key is
accidentally held down. The time required to hold the green key down to power
up the device is configurable.
NOTE
The Verifone copyright screen starts and displays a unique copyright screen. If
the terminal comes pre-loaded with an application, this starts after the initial
Verifone copyright screen and usually displays its own copyright screen.

DEVICE SETUP
Using the Battery
18 T650T INSTALLATION GUIDE
To manually shutdown, hold the red key down for about 4 seconds until the device
screen stays blank.
Using the
Battery
The T650T device uses a single cell Li-ion battery which features:
•The battery has a safety circuit that:
•Prevents cell damage from overcharge, over-discharge, or overheating.
•Activates when the battery is left in an unused device for extended
periods.
•The battery provides power to the security circuit when the T650T device has
no external power source.
•Li-ion batteries are not affected by shallow charging.
Follow these best practices for best function:
•Conserve battery power by turning the T650T device off when not in use.
•Keep the Li-ion battery inserted in the device and power up the device
periodically to check the battery charge. Do not let the battery charge fall
below 10% for extended periods of time as this may permanently diminish
battery capacity.
•Recharge the battery by connecting the USB-C end of the power pack to the
device and plugging the other end of the power pack into a wall outlet.
The T650T device has two-color LEDs:
•Amber: indicates that it is charging.
•White: indicates that it is fully charged.
Battery Life
Charging and discharging the T650T battery hundreds of times will wear out the
battery. Significantly reduced operating times indicate the need for battery
replacement (see Accessories and Documentation for ordering information).
NOTE
The T650T device will only operate when the battery is installed unless
connected to AC power, for example, in a stand.
NOTE
The T650T device automatically shuts off when the battery reaches the critically
low charge state. If this occurs, the battery must be recharged for a minimum of
1/2 hour before it can power the device. It may take several recharge attempts to
reset the safety circuit when charging a battery that has been discharged below
this critical state.
WARNING
Do not dispose batteries in fire. Li-ion batteries must be recycled
or disposed of properly. Do not dispose Li-ion batteries in
municipal waste sites.

DEVICE SETUP
Using the Battery
T650T INSTALLATION GUIDE 19
Charging the
Battery
After installing the battery, the T650T device can be connected to the optional
power pack or charged with a wireless charger.
Charging via the
Power Pack
Verifone offers the optional power supply (VPN PWR087-300-01-A) to connect
the device directly to a power outlet and to charge the battery.
1Insert the USB-C plug into the USB-C port of the T650T device.
2Plug the AC power pack into a wall outlet or powered surge protector.
Charging with the
Folio
Verifone also offers wireless charging accessories that can be connected to the
optional power supply (VPN PWR087-300-01-A) to charge the T650T device
when fitted with the Folio accessory.
1Insert the USB-C plug into the USB-C port of the wireless charging accessory.
2Plug the AC power pack into a wall outlet or powered surge protector.
3Set the rear cover of the Folio-equipped T650T device against the front face of
the wireless charger.
Upon startup, the T650T device loads its application, displays the Verifone
copyright screen, and shows a unique copyright screen.
CAUTION
Using an incorrectly rated power supply may damage the device or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the device matches the requirements specified on the bottom of
the device. (See Specifications for detailed power supply specifications.) Obtain
the appropriately rated power supply before continuing with troubleshooting.
WARNING
Do not plug the power pack into an outdoor outlet or operate the device outdoors.
During a transaction, disconnecting the power by removing the battery or
unplugging the device from a wall power while at very low battery charge may
cause transaction data files not yet stored in the device memory to be lost.
TIP
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
NOTE
When the T650T device is fitted with the Folio accessory, the Folio has inductive
charging that allows charging from any Qi charger.
Verifone provides specific accessories, as well (see Accessories and
Documentation for ordering information).
NOTE
If there is no available application in the device, DOWNLOAD NEEDED appears on
screen after the initial Verifone copyright screen.

DEVICE SETUP
Examining Connection Port
20 T650T INSTALLATION GUIDE
Examining
Connection Port
The device has dedicated input/output connectors: Ethernet, RS-232, USB-A,
USB-C and DC power.
To Connect the
Terminal Power
Supply
Insert the power supply cable to the T650T device and plug the other end to the
power supply.
Figure 7 T650T Power Supply Connection
TIP
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.