VEVOR 18150FTLB User manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
TORQUE WRENCH
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

1
18150FTLB
18250FTLB
16200INLB
17080FTLB
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions carefully
before operating. VEVOR reserves a clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won't inform you again if there are any technology or software
updates on our product.
TORQUE WRENCH

2
1. Important safety instruction
Please read the operation manual carefully before you start to operate the torque
wrench. contact the manufacturer for any questions. so as to avoid safety
accidents and damage to the torque wrench.
1.1 In order to maintain good accuracy, it is recommended to recalibrate
approximately once a year or each 5000 times
1.2 Make sure the torque wrench is set correctly before use (the torque is set on
the minimum scale for shipment).
1.3 Please go professional inspection department to perform regularly inspection
for function and accuracy , in order to avoid injury accidents or damage the torque
wrench, the individual must not disassemble the assembly.
1.4 After using the wrench, adjust to the minimum torque; If you do not use the
torque wrench for a long time, rub on the anti-rust oil and store in a dry place.
1.5 Do not using torque wrench as a hammer, or using pliers to clip wrench,or
using wrench in the water.
1.6 This product is intended to apply a specific torque force to a fastener such as
a nut or bolt. Do not use this product to loosen blots, screws or the other fastener,
since it might damage the ratchet and the calibrated settings.
1.7 To prevent damage to the product, stop applying pressure when the “click”
sound is heard. To remind that the “click” sound is acoustically weaker with lower
torque settings
1.8 Use only within rated torques range.

3
2.Parameter table
Torque Wrench- Parameter table
Item
Description
SKU1
SKU2
SKU3
SKU4
1
Model
18150FTLB
18250FTLB
16200INLB
17080FTLB
2
Drive Size
1/2"
1/2"
1/4"
3/8"
3
Number of
Teeth
72
72
72
72
4
Torque
Range (ft.lb)
10-150ft.lb
25-250ft.lb
20-200in.lb
10-80ft.lb
5
Torque
Range (n.m)
14-204n.m
34-340n.m
3-23n.m
14-110n.m
6
Packaging
Size
555×125×75mm
615×125×75 mm
275×115×60mm
555×125×75mm
7
G.W.
2.2kg
2.72kg
0.83kg
2.0kg
8
Unit
ft-lb / n.m
ft-lb/n.m
in-lb/n.m
ft-lb/n.m
9
Torque
precision
(clockwise)
±3%
±3%
±3%
±3%
3.Selection Guide
Select the appropriate type of torque wrench and sleeve according to the torque
value required by the bolt or nut to be tightened
Torque Wrench
Standard Socket
Tightened Nut

4
4.How to set a torque value
4.1 Pull back the locker to unlock the supplementary graduation.
4.2 Turn the Supplementary Graduation to set a torque(Combination of values on
the Main and supplementary graduations.
4.2.1 Turn Supplementary Graduation until 60N.m on Main Graduation close to
Graduation Datum Line. Now, torque is set at 60N.m。
4.2.2 Turn clockwise until 6 on Supplementary graduati on is aligned with Center
Line.Now Torque is set at 66N.m
4.3. Apply the socket on to a bolt head or nut.
Center line
Sup.Grad
Sup.Grad
Graduation Datum Line
Locker

5
4.4. Turn the torque wrench clockwise to fasten the bolt.
4.5. Stop pulling the wrench when you hear a "Click", this means it's already at the
torque value which you set.
5. Torque conversion table
6.Storage
6.1 This product is a precision instrument and should be stored with care using
provided storage box. Avoid any vibrations and shocks
6.2 Set the toque to the lowest level before storage
EC Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
UK Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer：Hangzhou Hao Gong Tools Co., LTD.
Address：Lihe South R.d. Yiqiao Town Xiaoshan Distrct Hangzhou City Zhejiang
Province PRC

Technical Support and E-Warranty Certificate
www.vevor.com/support