SAFETY INSTRUCTION AND PRECAUTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
Bolt Extractor Use Steps
1.First check the bolt is due to what reason into the broken open.
2.Select proper gauge bit according to the diameter of the bolt.
3.In the center of the crack open, drilling holes.
4.Select the corresponding screw extractor insert.
5.Use the active wrench or power tool to turn anticlockwise and remove
success.
