WATSON Edison Junior Power Pole User manual

ASSEMBLY
360.394.1300 watsonfurniture.com
V.22.0 2/2022
Edison Junior Power Pole

2 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
Edison Junior Power Pole Components
Ceiling Bar Power Pole
Cover
Ceiling Bar Clamp

3 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
Hardware
M6-1.0x12mm Low
Profile Cap Screw
(0001140)
Glide w/ 5/16-18 x ¾”
Long Stem
(059325)
M4 X 8mm Thread
Cutting Screw
(0003016)
M6-1.0 X 12mm Button
Head Cap Screw, Black
(125285, Black)
(125290, Zinc)
Tools
Electric Drill 4mm Hex Bit Phillips Bit3mm Hex Bit

4 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
Position Power Pole
Align the power pole with the corresponding holes in the rail segment.
1.

5 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
Secure Power Pole
Secure the power pole to the rail using (3) M6 X 12mm screws and (2) M4 X 8mm screws.
2.
M4 X 8mm Thread
Cutting Screw
(0003016)
M6-1.0 X 12mm Button
Head Cap Screw, Black
(125285, Black)
(125290, Zinc)

6 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
3. Attach Clamp to Ceiling Bar
Fit the ceiling bar clamp into the slots at the end of the ceiling
bar, and rotate into place, as shown below.
4. Mount Ceiling Bar to Ceiling
Hook the ceiling bar on the 2’ ceiling grid and screw the clamp to the ceiling bars with one screw on
each side. Note: ensure that ceiling system has required weight capacity.
M6-1.0x12mm Low
Profile Cap Screw
(0001140)

7 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
5. Connect Power Pole to Ceiling
Hook the power pole onto the ceiling bar, and align the pole with the bracket at the desired position. Screw the
pole to the ceiling bar using (4) screws.
M6-1.0x12mm Low
Profile Cap Screw
(0001140)

8 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
6. Power Pole Cabling
Run the cables down from the ceiling through the pole and through
the rail end. Continue to run cables as required.

Glide w/ 5/16-18 x ¾”
Long Stem
(059325)
9 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS
7. Secure Power Pole Cover
Slide the cover onto the power pole from the outside and secure using the Glide.