WATSON Verve User manual

DeskAssembly
Page 1of 2
Step 1
Placesupporttubeonbottom
of desk. Placetwobrackets
(WFG#500800F)onstiffener
tubeandaligntopilotholes.
Attachusing#10 x3/4" wood
screwsprovided(FIG-1).
Note:
Onthe84"widedesks,the
3brackets arereplacedby
onebracket(WFG#490155F)
thatspansthelengthofthe
supporttube.
Step 2
Attachlegsnext.Alignholesinleg
bracketstothethreadedinsertsin
desk.Attachlegstodeskwith
1/4-20 x3/8" machinescrews
provided(FIG-2).
M2
1/4-20 x3/8"
machinescrew
3/8"
PRODUCTINSTALLATION:
INS30100
M2
WATSONDESKING
800.426.1202 www.watsondesking.com
FASTENERKEY
FIG-1FIG-2
#10 x3/4"
wood screw
3/4"

DeskAssembly:Verve
Page 2of 2
M2
Step 1
AlignthetwohalvesoftheVerve
worksurface.
Step 2
Slipthejointconnectorsintothe
pocketsandusethethinrod
providedtotightentheball
shapednuts. Make surethetop of
thetwohalvesoftheworksurface
aretightandflush.
Step 3
Dropsteelhatchannelin
placeandsecurewith
1/4-20 x3/8" machine
screws(FIG-2).
Finishassemblyby
attachingsupport
tubesandlegsas
shownonpage1.
1/4-20 x3/8"
machinescrew
3/8"
PRODUCTINSTALLATION:
INS30100
M2
WATSONDESKING
800.426.1202 www.watsondesking.com
FASTENERKEY
FIG-2