WB Mfg DT-45A User manual

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Drafting Table
Assembly Instructions
w/ Drawers on Right
Step 1:
• Lay apron assembly on a protected flat surface with
apron side facing up.
Step 2:
• Insert hanger bolt on one leg through the corner
bracket and insert lock washer and hex nut.
• Screw on nut using a ⁄” wrench or ⁄” socket and
torque wrench.
• Do NOT tighten all the way.
• Repeat for the other leg.
• The leg with the chamfer must go on the front of the
table with chamfered edge facing out.
Step 3:
• Screw leg levelers into t-nut on bottom of legs.
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Tools Required
• ⁄” wrench
• ⁄” socket and
torque wrench
(optional)
• 4mm wrench
V031821 Version subject to change
Apron side
facing up
Step: 1
Front leg Back leg
Front apron
Leg with a
chamfer needs to
be facing out
Hinge
Step: 2
Levelers
Step: 3

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
2
Drafting Table
Assembly Instructions
w/ Drawers on Right
Step 4:
• Attach brace between the two legs by inserting
confirmats into the legs. Tighten using a 4mm
wrench.
• Make sure brace is straight and all comfirmats are
secure.
Step 5:
• Attach stretcher to leg brace with confirmats, tighten
with 4mm wrench.
• Go back to Step 2 and tighten the hanger bolt for
each leg using a ⁄” wrench or ⁄” socket and torque
wrench, to a minimum of 12ft lbs but not to exceed
17ft lbs.
Step 6:
• Take out drawers to attach stretcher from inside the
cabinet.
• With someones help, flip apron assembly over onto
legs.
• Align holes on stretcher to holes on left side of
cabinet.
• Attach the stretcher to the cabinet with corfirmats,
tighten with 4mm wrench.
Leg brace
Step: 4
Stretcher
Step: 5
Left side
Stretcher
Outside of cabinet Inside of cabinet
Confirmats
Step: 6

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
3
Drafting Table
Assembly Instructions
w/ Drawers on Right
Step 7:
• Position apron assembly so inner holes of brackets
on internal apron are lined up with two holes on left
side of cabinet.
• Front apron will be flush with front of cabinet and
back apron wil be flush with the back of the cabinet.
• Attach apron assembly to left side of cabinet with
hardware provided.
• Adjust leg levelers to level apron assembly with
cabinet.
Step 8:
• Line up pencil ledge on side of adjustable top in
desired location.
• Pre-drill holes in top to prevent splitting.
• Screw pencil ledge to top using hardware provided.
• Set your table in place.
• Put drawers back in.
Attach apron assembly to cabinet
through here on both brackets
Bracket - typical
Internal apron
Front apron
Back apron
Pencil ledge

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
4
Drafting Table
Assembly Instructions
w/ Drawers on Right
Items Included Part # Part Description QTY
Top and apron assembly N/A Top assembly (factory assembled) 1
Cabinet N/A Cabinet - size varies 1
Legs Varies Leg, mpl - height varies 2
Leg hardware 520001 Leg hardware kit, 1 leg 2
Leg brace N/A Leg brace - size varies 1
Stretcher brace N/A Stretcher - 20.75” long 1
Confirmats - legs 227578 Screw, 7mmx90mm, conn, Allen head, black 4
Confirmats - stretcher 228564 Screw, 7mmx90mm, conn, Allen head,black 4
Bolt - Internal apron 231922 Bolt, ⁄-16x1.625 hex head 2
Washer - internal apron 100451 Washer, ⁄” flat zinc plated 2
Pencil ledge 14-0027 Pencil ledge 1
Screws - Pencil ledge 236263 Screws, #6x⁄” truss head, quad black 6
Part Identifier Key