Whalen MainStays Parsons User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2018-04-03 Rev. 0001-B Factory: NEFOST
Parsons Desk
Stock # MS87-020-096-01 Black Oak Finish
# MS87-020-096-02 Canyon Walnut Finish
# MS87-020-096-07 Espresso Finish
# MS87-020-096-08 Rustic Oak Finish
# MS98-020-096-02 White Finish
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED:
/
/

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Parsons Desk
MADE IN CHINA
1. Please read the Assembly Instructions prior to assembling the unit.
2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.
3. Keep all hardware part out of reach of children.
4. Please wait until all steps are completed before tightening bolts.
5. Make sure all bolts are tightly fastened before the unit is used.
MAXIMUM LOAD 200 lb. (90.8 kg)
MAXIMUM RECOMMENDED WEIGHT LOADS
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE
MAXIMUM WEIGHTS INDICATED. USE WITH HEAVIER THAN THE MAXIMUM
WEIGHTS INDICATED MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
GENERAL INFORMATION, TIPS
AND
TRICKS
MAXIMUM LOAD 10 lb. (4.5 kg)

3
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Desk Top (Qty. 1)
B- Leg (Qty. 4)
(1) 1/4" x 2" Bolt (2) Lock Washer (3) Flat Washer
(Qty. 8+1 extra) (Qty. 8+1 extra) (Qty. 8+1 extra)
Hex Wrench (Qty. 1) Touch-up Pen (Qty. 1)
(Not included for White Finish)
Tools required: Hex wrench (provided).

4
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Position the Desk Top (A) upside down on a level and protected surface as shown.
3. Attach four Legs (B) to the apron corners of the Desk Top (A) with the end dowels fully inserted by
using the 2" Bolts (1) with the Lock Washers (2) and Flat Washers (3) through the drilled holes on the
corner blocks and securely screw into the threaded inserts on the Legs.
4. Stand the desk upright and place it at your desired location.
A
B
B
B
B
B
A
123
Lock Washer
(8 used in this step)
②
Flat Washer
(8 used in this step)
③
2" Bolt
(8 used in this step)
①
CAUTION
Over tightening the bolt may
strip out the threaded insert.

5
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/nuts periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A touch-up pen has been provided to minimize the small nicks or scratches that may occur during
assembly or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State
or province to province.
Customer Service: 866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com

ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD.
POR FAVOR LEA Y MANTENGA PARA USO FUTURO.
Fecha 2018-04-03 Rev. 0001-B Fábrica: NEFOST
Escritorio Parsons
Serie # MS87-020-096-01 Acabado Encino Obscuro
# MS87-020-096-02 Acabado Nogal
# MS87-020-096-07 Acabado Expreso
# MS87-020-096-08 Acabado Encino Rústico
# MS98-020-096-02 Acabado Blanco
ENSAMBLE REQUERIDO POR ADULTO
Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto
a la tienda donde lo compró. Por favor llame a nuestro departamento de ayuda al cliente teniendo su
instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica:
866-942-5362
Hora Estándar del Pacífico: 8:30 am - 4:30 pm, de Lunes - Viernes
O visite nuestro sitio web las 24 horas del día, 7 días a la semana para recibir asistencia del producto
en www.whalenstyle.com
O por correo electrónico su petición a [e-mail]
NÚMERO de LOTE:
FECHA de COMPRA
:
/
/

2
FABRICANTE: Whalen Furniture Manufacturing
CATALOGO: Escritorio Parsons
HECHO EN CHINA
1. Por favor lea el instructivo antes de comenzar el ensamble .
2. Para evitar daños, ensamblar el producto en una superficie fuerte, nivelada y libre de abrazivos .
3. Mantenga todo el material de ferretería fuera del alcance de niños.
4. Esperar hasta que todos los pasos esten completados antes de apretar los tornillos.
5. Asegurar de que los tornillos y tuercas esten apretados antes de usar la unidad.
CARGA MÁXIMA 200 lb. (90.8 kg)
PESO MÁXIMO RECOMENDADOS
ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS
INDICADOS. SI SE EXCEDE EL PESO MÁXIMO, PODRIA RESULTAR EN UNA
INESTABILIDAD DE LA UNIDAD CAUSANDO POSIBLES LESIONES.
INFORMACIÓN GENERAL, RECOMENDA
CIONES Y TRUCOS
CARGA MÁXIMA 10 lb. (4.5 kg)

3
Lista de partes y material de ferretería
Por favor lea completamente las instrucciones y verifique que estén todas las partes antes de iniciar el
ensamblado.
A- Tapa de escritorio (Cant. 1)
B- Pata (Cant. 4)
(1) Tornillo de 1/4" x 2" (2) Arandela de presión (3) Arandela plana
(Cant. 8+1 extra) (Cant. 8+1 extra) (Cant. 8+1 extra)
Llave hexagonal (Cant. 1) Plumón de retoque (Cant. 1)
(No incluido para el acabado blanco)
Herramientas requeridas: Llave hexagonal (proveida).

4
Instructivo de ensamble
1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas.
2. Posicionar la tapa del escritorio (A) boca abajo en una superficie nivelada y protegida como se muestra.
3. Adjuntar cuatro patas (B) a las esquinas de la moldura delantal de la tapa del escritorio (A) con las
espigas exteriores insertadas empleando los tornillos de 2" (1) con las arandelas de presión (2) y las
arandelas planas (3) A través de los agujeros perforados en las esquinas y atornillar en los insertos
roscados en las patas.
4. Poner el escritorio en posición vertical y poner en el lugar deseado.
A
B
B
B
B
B
A
123
Arandela de presión
(8 usados en este paso)
②
Arandela plana
(8 usados en este paso)
③
Tornillo de 2"
(8 usados en este paso)
①
CUIDADO
Al apretar demasiado el tornillo,
puede desprenderse el inserto roscado.