Whalen Vellore Barstool User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 14958
Date 2014-09-09 Rev. 1 Factory: NISHWA
LOT NUMBER:
DATE PURCHASED: / /
Vellore Barstool
Model # MAL-77BL-E Black
# MAL-77WT-E White
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our website www.whalenfurniture.com
Or e-mail your request to [e-mail]

Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 2 Factory No. 14958
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Seat (1) B- Pole with Footrest (1)
C- Base (1) D- Gas Lift (1)
(1) 3/4″Bolt Allen Wrench
(4+1 extra) (1)
Tools required: Allen wench (provided).

Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 3 Factory No. 14958
Assembly Instructions
1. Remove all the parts from carton and divide them into part groups as indicated in the parts list.
2. Pick up the Gas Lift (D) and insert the thick end into the center hole of Base (C). Remove the top cover
from the Gas Lift for the following step.
C
D

Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 4 Factory No. 14958
Assembly Instructions
3. Position the Seat (A) upside down on a non-abrasive surface with the threaded inserts facing up. Align
the top plate of the Pole with Footrest (B) with the threaded inserts on the Seat; Ensure the Footrest is
pointing towards the front of the Seat. Attach it in place using four 3/4’’ Bolts (1) and tighten with the
enclosed Allen wrench.
NOTE: Place a protective cover (like the bubble wrap packing material) over the carton to prevent
from scratching the barstool material.
1
A
B
1
3/4” Bolt
(4 used in this step)
①

Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 5 Factory No. 14958
Assembly Instructions
4. Slide the Pole with Footrest (B) onto the top of the Gas Lift (D) and press down until the stool locks in
place.
B
A
C
D