Whalen odus-tdpd User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 17110
Date 2015-03-22 Rev. 1 Factory: GUOFUR
Triton Double Pedestal Desk
Model # ODUS-TDPD
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenfurniture.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

Model # ODUS-TDPD
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 2 Factory No. 17110
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Desk Top (1) B- Outer Frame (2) C- Left Inner Frame (1)
D- Right Inner Frame (1) E- Bottom Shelf (2) F- Middle Shelf (2) G- Back Stretcher (1)
(1) 1-1/4” Bolt (2) 2-3/4” Bolt (3) Lock Washer
(28+1 extra) (4+1 extra) (32+1 extra)
(4) Flat Washer (5) M8 x 30 mm Wood Dowel (6) M15 x 50 mm Wood Dowel
(32+1 extra) (16+1 extra) (8+1 extra)
(7) Barrel Nut (4+1 extra) (8) #6 x 18 mm Screw (8+1 extra) (9) “L” Metal Bracket (2)
(10) Wood Plug (4+1 extra) Allen Wrench (1) Touch-up Pen (1)
Tools required: Allen wrench (provided) and Phillips screwdriver (not provided).

Model # ODUS-TDPD
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 3 Factory No. 17110
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Fit the Shelves (E and F) to the posts of Left Inner Frame (C) and attach to the side rail with two 30 mm
Wood Dowel (5), two 1-1/4” Bolts (1), and two Washers (3 and 4) per shelf. As shown.
3. Repeat last step to attach one Outer Frame (B) at the other end.
4. Repeat the same procedure to form right pedestal frame. As shown.
B/D
E/F
1
43
5
E
F
D
B
B
D
E
F
B/C
E/F
1
43
5
E
F
B
C
C
B
E
F

Model # ODUS-TDPD
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 4 Factory No. 17110
Assembly Instructions
5. Locate the Desk Top (A) on a level and protective surface with the threaded inserts facing up.
6. Insert eight 50 mm Wood Dowels (6) into the large holes on the Desk Top (A) as a guide. Position the
assembled pedestals onto the inserted Wood Dowels (6) as shown.
7. Insert four Barrel Nuts (7) into both ends of the Back Stretcher (G). Be sure that the slot on the Barrel
Nut faces out and that the threaded hole points towards the entry of the bolt along the Stretcher.
8. Fit the Back Stretcher (G) to the back posts of Inner Frames (C and D) by inserting four 2-3/4” Bolts (2)
with the Washers (3 and 4) through the posts and screw into the Barrel Nuts (7) in the Back Stretcher.
9. Secure the assembled pedestals to the Desk Top (A) by using twelve 1-1/4” Bolts (1) with the Washers
(3 and 4) through the side frame top rails and screw into place.
UP
2
43
G
7
C/D
1
4
3
A
G
A
B
C
D
B
B/C/D
B
A
B/C/D
A
6
C
D
B

Model # ODUS-TDPD
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 5 Factory No. 17110
Assembly Instructions
10. Use the pilot holes as a guide, secure the Inner Frames (C and D) to the Desk Top (A) by attaching two
Metal Brackets (9) at the adjacent using four 18 mm Wood Screws (8) per Metal Bracket. Tighten the
screws with a Phillips screwdriver.
11. Ask for assistance to stand the assembled desk upright.
12. Cover the countersunk holes on the inner side frame posts by inserting the provided Wood Plugs (10).
Gently tap the Wood Plugs with a rubber mallet to ensure they are fully seated.
C/D
A9
8
8
A
C
D
A
D
10
C
10
B
B