Xiaomi Mi Electric Scooter Essential User manual

K010P0847-A0
Illustrations of product, accessories, and user interface in the user
manual are for reference purposes only.
Actual product and functions may vary due to product enhance-
ments.
For further information, please go to www.mi.com
For detailed e-manual, please go to www.mi.com/global/service/userguide
Original instructions
User Manual

02
T-shape Allen KeyEN
Package Contents
ScrewEN
01
User ManualEN Important InformationEN SpecificationsEN
Extension NozzleEN
Power AdapterEN

1 2
2
1
Fold the handlebar stem up, fasten it, and put
down the kickstand.
EN Install the handlebar onto the stem.EN
Assembly and Set-Up
Charge Your Scooter
04
The scooter is fully charged when the LED on the charger
changes from red (charging) to green (trickle charge).
EN
Tighten the screws onto both sides of the stem with the
T-shaped Allen key.
EN
3
03

05 06
1Lift up the rubber ßap.EN 2Plug the power adapter into the
charging port.
EN 3Unplug when charging is completed.EN 4Put back the rubber ßap.EN

1The scooter without being activated will keep beeping
when turned on, and its speed is limited to 10 km/h.
EN Scan the QR code to download and install the app. EN
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of
the app displayed on your device should be taken as the default.
4Tap "+" on the upper right, and then follow prompts to
add your device.
EN
3Open Mi Home / Xiaomi Home app.EN
Connect with Mi Home / Xiaomi Home App
0807

2Step on the deck with one foot, and slowly kicks othe
other on the ground.
EN
5Follow the on-screen instructions in the app to activate
your scooter for the first use.
EN 6The beeping sound will not stop until the scooter
is activated.
EN
1Warning: Wear a helmet, elbow pads and knee pads.
EN
Note: The version of the app might have been updated, please follow the instructions
based on the current app version.
How To Ride
1009

0
V≥5km/h
3The accelerator initiates once the coasting speed
exceeds 5 km/h.
EN 5Tilt your body to the steering direction as you turn, and
slowly turn the handlebar.
EN
4Release the accelerator and squeeze the brake lever
for a sudden brake.
EN 6Put down the kickstand when parking.EN
1211

Watch out for safety risks.
1413
Safety Reminder
Always steer clear of obstacles. EN Keep your speed between 5-10km/h when you ride through speed
bumps, elevator door stills, bumpy roads or other uneven surfaces.
10
5
EN
other overhead obstacles.
Do not press the accelerator when you're
walking alongside the scooter.
EN EN

Do not try dangerous actions.
1615
EN Do not ride in trac lanes or residential areas where
vehicles and pedestrians are both allowed.
Do not abruptly change the steering direction at high speed.EN EN Do not hang bags or other heavy stuon the handlebar. Do not ride on one foot.
EN

Do not try dangerous actions.
Do not ride with anyone else, including children.EN
1817
EN Do not accelerate when going downhill, and brake in
time to slow down. When encountering a steep incline,
you need to step off the scooter and push.
EN Do not use mobile phone or wear earphones when
operating the scooter.
EN Do not ride in the rain. Do not ride through puddles or
any other (water) obstacles.

Do not try dangerous actions.
Do not try riding up or down stairs, nor try
jumping over obstacles.
EN
Do not keep your feet on the rear mudguard.EN Do not touch the disc brake.EN Do not let go of the handlebar while riding.EN
2019

1
2
1
Hold the handlebar stem, turn it counterclockwise to
open the safety hook and open the quick release lever.
EN 2Align the bell and the buckle and hook them.
EN 3Hold the handlebar stem with either one hand or both
hands to carry.
EN 4Disengage the bell lever from the buckle on
the mudguard.
EN
Folding and Carrying
2221
Open

If the brake is too tight/loose, use the 4 mm Allen key to loosen the screw on the caliper. Then slightly adjust the brake line (decrease/increase
the exposed lenght), and tighten the screw again.
EN Before adjustment, make sure the scooter is powered off and not charging.
Unscrew the valve cap.EN Connect the extension nozzle to the tire
valve stem.
EN Connect the pump to inflate the tire.EN
24
Adjusting the Disc Brake Tire Valve Stem
Brake Cable
Valve Cap

Once the scooter is locked, the motor will be locked and the headlight will be turned off automatically, and there will be an icon displayed in
the control panel.
EN
Note: If no password is set, the scooter can be unlocked by the Mi Home/Xiaomi Home app from any of the phones. Make sure
you set the password in the app as soon as possible once you get the scooter. In case you forget the password, please go to
www.mi.com or contact the after-sales department for help.
EN
2625
Lock Your Scooter Set Password
Tap here>"More Settings">"Set password"EN
LockEN UnlockEN