Xplova X3 User manual

Xplova X3 Quick Start
Guide
EN-1
EN
Meet your X3
Packagecontents
•Xplova X3 Smart
CyclingComputer
•Micro-USB Cable
•Bike Mount x2
•Rubber Pad x2
•Elastic Band x4
•Warranty Card
•Quick Start Guide
Getting to know yourX3
A. Left key (POWER key): Power on / Return
to previous page / Power off (Long press)
B. Center key: Confirm / Start riding / Lap /
Stop timer / Resume timer
C. Right key: Scroll down / Go to next page
D. Micro-USB port
E. Bike mount latch

Xplova X3 Quick Start
Guide
EN-2
EN
Installing yourX3
Please follow the steps below to mount your X3on
the bike:
1. Hold the bike mount on top of the rubber pad
evenly together ensuring they are aligned squarely
to each other. Then place them on the bike
handlebar.
2. Loop an elastic band
fromonetabof thebike
mount.Stretchthefree
end of the elastic band
underneath the bike
handlebaranduptothe
other tab. Ensure the
bike mount stays in
place securely.
3. AlignthelatchonthebackofX3withthebikemount
notch. Press downward slightly and turn X3 until it
locks in place.
Charging your X3
1. PleaseuseastandardMicro-USBchargerwitha
5V charging port. The battery will be fully charged
within 3 hours.
2. Please pull out the weather cap from theMicro-
USB port with care to prevent breakage or
deformation. Any damage to the weather cap
may reduce its ability to resist dust and moisture.

Xplova X3 Quick Start
Guide
EN-3
Perform the initial setup
Press and hold the Left key (POWER key) to
power on X3 and follow the on-screen instructions
to complete the initial setup step bystep.
Screenoverview
Basic settings Riding mode
Status bar description Status bar icon
Speed Sensor
Cadence Sensor
Power Meter
GPS: Excellent Signal
GPS: Fair Signal
GPS: No Signal
GPS: GPS off
EN

Xplova X3 Quick Start
Guide
EN-4
Uploading activities
Using Xplova Connect App or USB to upload
activitiestowebsitesandgetmoredetailedanalysis
of your activities.
More excitingfeatures
Tomaximize the functionalities of your X3, it is
strongly recommended that you installXplova
Connect App in your smartphone.
You can use Xplova Connect App to:
•View/store activities from X3
•Uploadyouractivities/routesondifferentplatforms
(e.g., Xplova, Strava and others).
Open your smartphone’s application store (Google
PlayorAppStore)andsearchfor"XplovaConnect",
then download and install the application.
Tolearn more about your X3, please download the
User’s Manual at www.xplova.com.
Important safetyinstructions
Theoperatingtemperatureofthedeviceisbetween
-10°C to 40°C.
CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BYAN
INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO
THE INSTRUCTIONS.
EN