Xtreme V80 Series Guide

V80 Value Series Pure Sine Wave
Line Interacve UPS
700VA, 1000VA, 1500VA, 2000VA Models
User & Installaon Manual
www.xpcc.com | © 2022 Xtreme Power Conversion Corporaon. All rights reserved. (Rev 7/6/22)

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 2
Uninterrupble Power Supply
Table of Contents
Important Safety Warning............................................................................3
Transportaon.................................................................................................................................3
Preparaon......................................................................................................................................3
Installaon.......................................................................................................................................3
Hardware Installaon......................................................................................................................3
Maintenance, Service, and Faults...................................................................................................4
Storage........................................................................................................5
Basic Operaon............................................................................................5
Front and Top Panel Descripon......................................................................................................5
LCD Indicators..................................................................................................................................6
Troubleshoong...........................................................................................7
Fault Reference Codes....................................................................................................................8
Specicaons...............................................................................................9
Shipping List................................................................................................9
Obtaining Service.......................................................................................10
Xtreme Power Conversion Limited Warranty..............................................11
Xtreme Power Conversion Load Protecon Policy.......................................12

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 3
Uninterrupble Power Supply
Important Safety Warning
This manual contains important safety instrucons. Please read and follow all instrucons carefully during installa-
on and operaon of the unit. Read this manual thoroughly before aempng to unpack, install, or operate your
UPS.
Transportaon
• Please transport the UPS system only in the original package to protect against shock and impact.
Preparaon
• Condensaon may occur if the UPS system is moved directly from cold to warm environment. The UPS
system must be absolutely dry before being installed. Please allow at least two hours for the UPS system
to acclimate the environment.
• Do not install the UPS system near water or in moist environments.
• Do not install the UPS system where it would be exposed to direct sunlight or near heater.
• Do not block venlaon holes in the UPS housing.
Installaon
How to determine the power requirements of your equipment
1. Ensure that the equipment plugged into the baery power-supplied outlets does not exceed the UPS
unit’s rated capacity. If rated unit capacies are exceeded, an overload condion may occur and
cause the UPS unit to shut down or the fuse blow.
2. There are many factors that can aect the amount of power that your computer system will require.
For opmal system performance keep the load below 80% of the unit’s rated capacity.
Hardware Installaon Guide
1. Your new UPS may be used immediately upon receipt. However, recharging the baery for at least 8
hours is recommended to ensure that the baery’s maximum charge capacity is achieved. Charge loss
may occur during shipping and storage. To recharge the baery, simply leave the unit plugged into an AC
outlet. The unit will charge in both the on and o posion.
2. With the UPS unit o and unplugged, connect the computer, monitor, and any externally powered
data storage device.
3. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet
is protected by a fuse or circuit breaker and does not service equipment with large electrical demands.
• To prevent the risk of re or electric shock, install in a temperature and humidity controlled indoor area
free of conducve contaminants. (See the specicaons for the acceptable temperature and humidity
range.)
• To reduce the risk of overheang the UPS, do not cover the UPS’ cooling vents and avoid exposing the unit
to direct sunlight or installing the unit near heat eming appliances such as space heaters or furnaces.
• Do not aach non-computer-related items, such as medical equipment, life-support equipment, micro-
wave ovens, or vacuum cleaners to UPS.
• Do not plug the UPS input into its own output.
• Do not allow liquids or any foreign object to enter the UPS. Do not place beverages or any other liquid-
containing vessels on or near the unit.
• In the event of an emergency, press the OFF buon and disconnect the power cord from the AC power
supply to properly disable the UPS.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 4
Uninterrupble Power Supply
4. Depress the power switch to turn the unit on. The LCD indicator light will illuminate and the unit will
“beep”.
5. To maintain opmal baery charge, leave the UPS plugged into an AC outlet at all mes.
6. To store your UPS for an extended period, cover it and store with the baery fully charged. Recharge
the baery every three months to ensure baery life.
Maintenance, Service, and Faults
• The UPS system operates with hazardous voltages. Repairs may be carried out only by qualied mainte-
nance personnel.
• Cauon - risk of electric shock. Even aer the unit is disconnected from the mains (building wiring outlet),
components inside the UPS system are sll connected to the baery and electrically live and dangerous.
• Before carrying out any kind of service and/or maintenance, disconnect the baeries and verify that no
current is present and no hazardous voltage exists in the terminals of high capability capacitor such as
BUS-capacitors.
• To avoid electrical shock, turn o the unit and unplug it form the AC power source before servicing the
baery.
• Only persons are adequately familiar with baeries and with the required precauonary measures may
replace baeries and supervise operaons. Unauthorized persons must be kept well away from the bat-
teries.
• Cauon - risk of electric shock. The baery circuit is not isolated from the input voltage. Hazardous volt-
ages may occur between the baery terminals and the ground. Before touching, please verify that no
voltage is present!
• Baeries may cause electric shock and have a high short-circuit current. Please take the precauonary
measures specied below and any other measures necessary when working with baeries:
»Remove wristwatches, rings and other metal objects
»Use only tools with insulated grips and handles.
• When changing baeries, install the same number and same type of baeries.
• Do not aempt to dispose of baeries by burning them. This could cause baery explosion.
• Do not open or destroy baeries. Escaping electrolyte can cause injury to the skin and eyes. It may be
toxic.
• When replacing baeries, replace with the same type and number of baeries or baery packs.
• Do not dismantle the UPS system.
• A baery can present a risk of electrical shock and high short-circuit current. The following precauons
should be observed when working on baeries:
»Remove watches, rings, or other metal objects.
»Use tools with insulated handles.
»Wear rubber gloves and boots.
»Do not lay tools or metal parts on top of baeries.
»Disconnect charging source prior to connecng or disconnecng baery terminals.
»Determine if baery is inadvertently grounded. If inadvertently grounded, remove source from
ground. Contact with any part of a grounded baery can result in electrical shock. The likelihood
of such shock can be reduced if such grounds are removed during installaon and maintenance.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 5
Uninterrupble Power Supply
Storage
1. First turn o your UPS and disconnect its power cord from the wall outlet. Disconnect all cables con
nected the UPS to avoid baery drain.
2. The UPS should be stored in a cool dry locaon.
3. Make sure the baery is fully charged before the UPS is stored.
4. For extended storage in moderate climates, the baery should be charged for 12 hours every 3
months by plugging the power cord into the wall receptacle and turning on the main switch. Repeat it
every 2 months in high temperature locaons.
Basic Operaon
Front and Top Panel Descripon
1. Input Circuit Breaker
The circuit breaker provides opmal overload protecon.
2. AC Inlet
Connect to ulity power through the input power cord.
(IEC320 C14 for 700VA/1000VA/1500VA, IEC 320 C20 for 2000VA)
3. AC outlet
The UPS provides outlets for connected equipment to insure temporary uninterrupted operaon during
a power failure and against surges and spikes.
4. USB Port
This port allows connecon and communicaon from the USB port on the computer to the UPS unit.
5. Power On/O Buon
Press the power Buon to turn the UPS ON or OFF.
6. Seng Buon
The audible alarm can be turned o/on by pressing this buon 3s.
7. LCD Display
The LCD will display the UPS status.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 6
Uninterrupble Power Supply
Denions for Illuminated LCD Indicators
LCD Indicators
AC INPUT(Voltage)
V
OUTPUT(Voltage)
V
Inial
Line mode
Bat-mode
Baery capacity
Load capacity
Fault
Sound disable
(Press the seng key 3s to disable and enable the buzzer sound)

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 7
Uninterrupble Power Supply
Troubleshoong
Problem Possible Causes Remedy
Abnormal
Mains normal but not
works in AC mode
1. AC Input missing 1. Check AC input connecon.
2. Input Breaker is tripped 2. Unplug the power cord of the UPS then
press the circuit breaker knob.
The UPS will not turn
on.
The on/o Buon is designed to prevent
damage by rapidly turning it o and on.
Turn the UPS o. Wait 10 seconds and
then turn the UPS on.
The unit is not connected to an AC outlet. The unit must be connected to a 100-
127V 50/60Hz outlet.
The baery is worn out. Contact technical support.
Mechanical problem.
Outlets do not provide
power to equipment
Circuit breaker is tripped due to overload
Turn the UPS o and unplug at least one
piece connected equipment. Unplug the
power cord of the UPS then press the
circuit breaker knob
Baeries are discharged Allow the unit to recharge for at least 4
hours.
Unit has been damaged by a surge or spike. Contact technical support.
Alarm code A51
Site Fail:
Line and neutral conductors of UPS Input
are reversed or the Ground is disconnect-
ed.
Check the input plug and socket.
Alarm code A56
Baery low:
Baery capacity is low, UPS will turn o
soon
1. Shut o non-essenal equipment.
2. Save your data and turn o the com-
puter.
Alarm code A64
Overload:
Your equipment requires more power than
the UPS can provide.
1. Shut o non-essenal equipment.
Alarm code A68 Over Temperature 1. Shut o non-essenal equipment.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 8
Uninterrupble Power Supply
Fault Codes
Fault
Fault code E09 Output Short :
Output circuit short.
1. Shut down the UPS
2. Your aached equipment may have
problems, please remove them and check
again.
Fault code E14
Overload:
Your equipment requires more power than
the UPS can provide.
It will shutdown.
Shut o non-essenal equipment. If this
solves the overload problem, the UPS will
transfer to normal operaon.
Fault code E18 Fan fail :
Fan has been damaged.
1.Shut down the UPS
2.Replace the fan
Fault code E19 Over Temperature
1. Shut down the UPS. Restart the UPS
to Check the fan for operaon and if the
venlaon hole has been covered
2. Contact technical support for repair.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 9
Uninterrupble Power Supply
Specicaons
Shipping List
1. Line cord
2. Rack Ear
3. User manual
4. USB cable
MODEL NUMBER V80-700 V80-1000 V80-1500 V80-2000
CAPACITY Power rang 700VA (420W) 1000VA (600W) 1500VA (900W) 2000VA (1200W)
INPUT Voltage nominal 120VAC
Voltage range 82-148VAC
Frequency 50/60Hz auto sensing
OUTPUT Voltage 120VAC
Waveform Pure sine wave
Transfer me (typical) 2–6ms
Eciency Up to 96% ECO mode, 93% buck and boost mode
Harmonic distoron 2% @ 100% linear load; 5% @ 100% non-linear load
BATTERY Baery type Sealed, maintenance-free lead acid
Baery quanty & size (1) 12V 9AH (2) 12V 7AH (2) 12V 9AH (2) 12V 9AH
Charging current 1A max
Typical recharge 4 hours to 90%
PHYSICAL Dimensions (W x D x H) 17.2" x 16.1" x 3.5"
Weight 24 lbs 27.3 lbs 36.5 lbs 36.5 lbs
Line cord (removable) 6, 5-15P to C13 6, 5-20P to C19
Receptacles (8) NEMA 5–15R
ENVIRONMENT Operang temperature 32–104°F (0–40°C)
Audible noise < 40dBA < 45dBA
Altude 11,500  above sea level
APPROVALS cTUVus, RoHs
WARRANTY 3 years electronics, 3 years baery warranty (USA and Canada)
COMMUNICATIONS INTERFACE USB
INCLUDED IN BOX Line cord, tower pedestals, user manual, USB cable
AVAILABLE OPTIONS 5 year extended warranty, bypass distribuon (XBDM), power distribuon (XPDU), 4-post rail
kit, 2-post shelf kit, wall mount bracket

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 10
Uninterrupble Power Supply
Obtaining Service
If the UPS requires Service:
1. Use the TROUBLESHOOTING secon in this manual to eliminate obvious causes.
2. Verify there are no circuit breakers tripped.
3. Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem, call Xtreme
Power Conversion Corp Technical Support at 800.582.4524. Technical support inquiries can also be made at
[email protected]. Please have the following informaon available BEFORE calling the Technical Support
Department:
• Your name and address.
• The serial number of the unit.
• Where and when the unit was purchased.
• All of the model informaon about your UPS.
• Any informaon on the failure, including LED’s that may or may not be illuminated.
• A descripon of the protected equipment, including model numbers if possible.
• A technician will ask you for the above informaon and, if possible, help solve your problem over the
phone. In the event that the unit requires factory service, the technician will issue you a Return Mate-
rial Authorizaon number (RMA).
If you are returning the UPS to Xtreme Power for service, please follow these procedures:
1. Pack the UPS in its original packaging. If the original packaging is no longer available, ask the Technical Sup-
port Technician about obtaining a replacement set of packaging material. It is important to pack the UPS
properly in order to avoid damage in transit. Never use Styrofoam beads for a packing material.
2. Include a leer with your name, address, dayme phone number, RMA number, a copy of your original
sales receipt, and a brief descripon of the problem.
3. Mark the RMA number on the outside of all packages. Xtreme Power cannot accept any package without
the RMA number marked on the outside of the boxes.
4. Return the UPS by insured, prepaid carrier to the address provided by the Technician.
5. Refer to the Warranty statements in this manual for addional details on what is covered.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 11
Uninterrupble Power Supply
Xtreme Power Conversion Limited Warranty
Xtreme Power Conversion (XPC) Corporaon warrants Xtreme Power Conversion equipment, when properly ap-
plied and operated within specied condions, against faulty materials or workmanship for a period of three years
for V80-Series products from the date of purchase. XPC Corporaon warrants internal baeries for a period of
three years from the date of purchase. For equipment sites within the United States and Canada, this warranty
covers repair or replacement, at the sole discreon of XPC Corporaon. The customer is responsible for the costs
of shipping the defecve product to XPC Corporaon. XPC Corporaon will pay for ground shipment of the re-
paired or replacement product. This warranty applies only to the original purchaser.
If equipment provided by XPC Corporaon is found to be Dead-on-Arrival (DOA), XPC Corporaon will be respon-
sible for the costs of shipping product to and returning equipment from the customer in a mely manner as agreed
to with the customer, once the customer has requested and received a Return Material Authorizaon (RMA)
number. DOA equipment is dened as equipment that does not properly funcon according to user documenta-
on when inially received and connected in conjuncon with proper procedures as shown in the user documen-
taon or via support provided by XPC Corporaon personnel or authorized agents.
This warranty shall be void if (a) the equipment is repaired or modied by anyone other than XPC Corporaon or
a XPC Corporaon approved third party; (b) the equipment is damaged by the customer, is improperly used or
stored, is subjected to an adverse operang environment, or is operated outside the limits of its electrical speci-
caons; or (c) the equipment has been used or stored in a manner contrary to the equipment’s operang manual,
intended use or other wrien instrucons. Any technical advice furnished by XPC Corporaon or a XPC Corpora-
on authorized representave before or aer delivery with regard to the use or applicaon of Xtreme Power Con-
version equipment is furnished on the basis that it represents XPC Corporaons best judgment under the situaon
and circumstances, but it is used at the recipient’s sole risk.
EXCEPT AS STATED ABOVE, XPC Corporaon DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
EXCEPT AS STATED ABOVE, IN NO EVENT WILL XPC Corporaon BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF Xtreme Power Conversion EQUIPMENT,
including but not limited to, any costs, lost prots or revenue, loss of equipment, loss of use of equipment, loss
of soware, loss of data, cost of substutes, or claims by third pares. Purchaser’s sole and exclusive remedy for
breach of any warranty, expressed or implied, concerning Xtreme Power Conversion equipment, and the only
obligaon of XPC Corporaon under this warranty, shall be the repair or replacement of defecve equipment,
components, or parts; or, at XPC Corporaons sole discreon, refund of the purchase price or substuon of an
equivalent replacement product.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 12
Uninterrupble Power Supply
Xtreme Power Conversion Load Protecon Policy
THIS POLICY IS NOT A WARRANTY. REFER TO THE XPC CORPORATION, INC. LIMITED WARRANTY FOR
INFORMATION CONCERNING THE WARRANTY FOR YOUR XPC PRODUCT. THE LIMITATIONS AND CONDITIONS
CONTAINED IN THIS POLICY DO NOT AFFECT THE TERMS OF THE XPC LIMITED WARRANTY.
Denions:
1. “Product” means a Standard 120, 208, or 240 Volt power protecon device that is used in the United
States and Canada. This policy does not include custom manufactured products.
2. “Power Disturbance” means an AC power line transient (telephone line or Local Area Network, if appli-
cable), spike or surge.
3. “Connected Equipment” properly connected electronic equipment
4. “Fair Market Value” of damaged Connected Equipment as determined by XPC shall be the lower of (a) the
average price the same or similar items are being sold for on eBay, (b) the price list of Orion Blue Book (or
if such price list is no longer published, a published or announced price list reasonably selected by XPC),
(c) the lowest price the same or similar items can be purchased for in the United States or (d) the total
amount of all payment(s) you have or are entled to receive from insurance, other warranes, extended
warranes, a legal liability claim or from other sources or persons for the damaged Connected Equipment.
5. “Purchaser” means the person or enty that originally purchased the Product from an authorized reseller
or distributor of XPC Products.
The Purchaser of this Product is protected, for the term of the XPC Limited Warranty, against certain losses caused
by a Power Disturbance for properly connected electronic equipment (referred to as the "Connected Equipment")
subject to certain terms and condions provided below.
This policy applies only to the original purchaser of the Product. If the Product is transferred or sold to another
person or enty, this policy is void.
Load Protecon Policy Dollar and Period Limits
For purchasers that meet the qualicaons and condions set forth in this policy, XPC will provide reimbursement
(cost of repair or fair market value as determined by XPC) during the period limits and up to the dollar limits stated
as follows:
PRODUCT DOLLAR LIMIT PERIOD OF COVERAGE
V80 25,000 Term of XPC Limited Warranty
XST 25,000 Term of XPC Limited Warranty
S70 25,000 Term of XPC Limited Warranty
XPRT 6kVA & 10kVA 50,000 Term of XPC Limited Warranty
P80, P80g 50,000 Term of XPC Limited Warranty
P90, P90L, P90g, P90Lg 50,000 Term of XPC Limited Warranty
T90, T91 50,000 Term of XPC Limited Warranty
TX90, TX90i 50,000 Term of XPC Limited Warranty
This Load Protecon Policy is not deemed "rst dollar" coverage. XPC’s obligaon is reduced by any amounts that
the Purchaser is entled to recover, from other sources regarding the Connected Equipment, including, but not
limited to, insurance, other warranty, extended warranty, or legal liability, regardless of whether or not the Pur-
chaser makes a claim for recovery.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 13
Uninterrupble Power Supply
Eligibility for Coverage Under the Load Protecon Policy
1. The Product must be registered on the XPC website, www.xpcc.com, within 10 days of purchase. All re-
quired informaon must be provided, and Purchaser should retain a copy for Purchaser’s records. When
registering on the website, Purchaser must list all connected equipment that is directly connected to the
product. Only those devices registered in that manner will be covered.
2. All Connected Equipment must be UL or CSA approved.
3. The Product must be plugged into a properly wired and grounded outlet. Use of input surge devices, ex-
tension cords, adapters, ground wires, or electrical connecons not manufactured by XPC voids the XPC
Load Protecon Policy. No other surge protecon device may be connected to the output sockets of the
Product. The installaon must comply with all applicable electrical and safety codes set forth pursuant to
the NEC.
4. The Product must have undeniable physical evidence of a Power Disturbance that directly and proximately
caused the damage;
5. The Connected Equipment must have been damaged by a Power Disturbance on a properly installed,
grounded, and Naonal Electric Code, ("NEC"), code-compliant 120, 208, 240 Volt AC power line in the
United States or Canada, by a Power Disturbance on standard telephone land line or PBX telephone equip-
ment line that is properly installed and connected to an RJ11 port on the Product; or by a Power Distur-
bance on a standard Local Area Network connecon that is properly installed and connected to an RJ45
port on the Product and (d) is directly plugged into, and properly connected to, the Product in its original
condion which was properly operated when a Power Disturbance passed through the Product and (i)
exhausts the protecon capacity of the Product or (ii) damages the Product.
6. The Load Protecon Policy does not apply if the Product has been operated in a failure mode or not in
compliance with XPC operang instrucons in the Product user's manual, or if the Connected Equipment
has not been operated in compliance with the instrucons and manuals of its manufacturer/vendor.
7. This policy is null and void if, XPC determines, in its sole discreon, that the Product has been tampered
with or altered in any way.
What is Not Covered Under the Load Protecon Policy:
The following damage is not covered by this Policy:
1. Restoraon of lost data and reinstallaon of soware.
2. Damage from a cause other than AC power-line transients, except for damage due to telephone line, Local
Area Network, or CATV transients, which is covered only if the Product oers such protecon.
3. DAMAGE CAUSED BY FAILURE TO PROVIDE A SUITABLE INSTALLATION ENVIRONMENT FOR THE PRODUCT
(INCLUDING, BUT NOT LIMITED TO, LACK OF A PROPER SAFETY GROUND).
4. Damage caused by the use of the Product for purposes other than those for which it was designed.
5. Damage caused by accidents, or natural disasters, including but not limited to, re, ood, and wind.
6. Damage caused by abuse, misuse, alteraon, modicaon, or negligence.
7. Any labor costs or travel, room and board expenses associated with the repair and/or restoraon of lost or
damaged hardware, soware or data.
EXCEPT AS EXPRESSLY PROVIDED IN THIS POLICY, XPC SHALL NOT BE LIABLE FOR ANY DAMAGES WHATSOEVER,
INCLUDING, BUT NOT LIMITED TO, DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR MULTIPLE
DAMAGES ARISING OUT OF THE USE OF THE PRODUCT OR DAMAGE TO THE CONNECTED EQUIPMENT, REGARD-
LESS OF THE LEGAL THEORY ON WHICH SUCH CLAIM IS BASED, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REV-
ENUE, LOSS OF USE OF THE PRODUCT OR THE CONNECTED EQUIPMENT OR ANY ASSOCIATED EQUIPMENT, LOSS
OF SOFTWARE, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, DOWNTIME,
THE CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.

Xtreme Power Conversion Corporaon
V80 User’s Manual
Page 14
Uninterrupble Power Supply
Subming a Load Protecon Policy Claim:
1. Any claim under the Load Protecon Policy must be made within 10 days of the date of alleged damage to the
Connected Equipment.
2. Call the XPC technical support department at 1-800- 582-4524 and obtain a Load Protecon Policy Returned
Material Authorizaon (RMA) number. Have informaon on all applicable insurance or other resources of re-
covery/payment that is available to the Purchaser and the name of the power ulity supplier for the locaon
of the Connected Equipment. XPC will forward to the Purchaser a Load Protecon Policy claims form, which
must be completed and led with XPC within 30 days.
• Mark the Load Protecon Policy RMA number on the Product the Purchaser is returning.
• Pack the Product in its original packaging or similar packing materials if the original packaging has
been discarded. Enclose the completed Load Protecon Policy claim form and a copy of the Purchas-
er’s original sales receipt for the Product in the box.
• Mark the RMA number clearly on the outside of the box.
• Ship the Product (one-way shipping charges paid by the Purchaser) to:
XPC Corporaon
230 Yuma Street
Denver, CO 80223
An: LPP RMA#
3. XPC will evaluate the Product to determine its level of funconality, and will examine the Product for evidence
of damage from a Power Disturbance.
• If XPCs' evaluaon provides no evidence of damage from a Power Disturbance, XPC will send to the
Purchaser (i) a report summarizing the tests performed and (ii) a rejecon of claim noce.
• If the Product shows evidence of damage from a Power Disturbance, XPC will request that all Con-
nected Equipment for which a Load Protecon Policy claim has been submied, be sent for evaluaon
to either XPC or an authorized service center. If it is determined that the Connected Equipment has
been damaged by a Power Disturbance, XPC will, in its sole discreon, issue payment to the Purchaser
for either the cost of repair of the Connected Equipment or the Fair Market Value of the damaged
Connected Equipment, up to the dollar limits stated above. XPC reserves the right to require the
Purchaser to transfer tle and deliver the Connected Equipment to XPC if it chooses to reimburse the
Purchaser for the fair market value of the Connected Equipment. XPCs' maximum liability shall be
reduced to reect all such other payments or sources of recovery, whether applied for or not.
4. If XPC issues payment to the Purchaser to have the Connected Equipment repaired, the repair must be per-
formed at a service center that is authorized by the manufacturer of the Connected Equipment. XPC reserves
the right to contact the authorized service center directly to discuss repair costs and damage to the Connected
Equipment to determine if it was caused by a Power Disturbance and the right to request that the service
center forward the Connected Equipment or components of the Connected Equipment to XPC for inspecon
5. Unless modied in wring signed by an ocer of XPC and the Purchaser, the terms of this policy are the com-
plete and exclusive agreement between the pares, superseding all prior agreements, oral or wrien, and all
other communicaons between the pares relang to the subject maer of this agreement. No employee of
XPC or any other party is authorized to make any representaons beyond those made in this agreement con-
cerning the Load Protecon Policy.
XPC Corporaon
230 Yuma Street
Denver, CO 80223
1.800.582.4524