Yale YDG413A User manual

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

Wireless Optional
Option
Remote
Controller
BLE module
Only 1EA
Only 1EA
One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching
The leading liveness performance improves the security of Yale smart lock dramatically.
Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology,
user can access and unlock the digital door lock with your smartphone.
Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically
within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check
that the door is securely locked when leaving the premises.
3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode
is activated for 3 minutes.
Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.
Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent
the PIN code from being exposed.
Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such
as passwords, RFID cards and fingerprints from outside when setting up functions indoors.
External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside
when setting up functions outside.
Voice Guide Feature
It guides user the operation status how to set each features, mode for easier
and more convenient use.
Other features and Benefits
•Remote Controller (Optional):
This option may not be available depending on your country or local dealer.
•Network Module/Controller (Optional):
It allows door lock to connect with Home network controller.
•Intrusion/Broken Alarm.
•Low Battery Alarm and Emergency Power Supply.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the Mirror
as soon as a user touches the product. The user can check the rear through
the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously affixed to the thumb-turn knob,
the user can turn the thumb-turn knob. Its security is improved compared to normal knob.
9V alkaline battery
(purchase separately)
Normal mode is a convenient mode for anyone to set the digital door lock.
User can set password like user code, visitor code, onetime code and register
user's fingerprints as well. Factory default is a normal mode.
Registr
-ation
Delete
Remote Controller
OR
OR
PIN CODE
U
PIN CODE
U
Button
SET
PIN CODE
U
Registr
-ation
Delete
Visitor Code
OR
OR
PIN CODE
U
PIN CODE
V
Registr
-ation
Delete
Onetime Code
Only 1EA, Automatically deleted after use
OR
OR
PIN CODE
U
OR
PIN CODE
U
PIN CODE
O
Continue / Complete
Registr
-ation New
User Code
PIN CODE
U
OR
Registr
-ation 8times
Fingerprint
Up to 100EA
12 (Registration process)
1
PIN CODE
U
PIN CODE
U
OR
OR
OR
OR
Registr
-ation
Language Change
PIN CODE
U
Korean
Chinese
English
Taiwanese
Delete
Delete all fingerprint credentials
Registr
-ation
Delete
Home Network Controller
OR
OR
PIN CODE
U
PIN CODE
U
roller
Cont
OR
1 2 3
Palm touch Enter the Code Palm touch Enter
the button
Fingerprint scan
completed
Touch the panel
(area sensor) with
fingerprint.wait for
operation sound
“ding-dong”
Check fingerprint
recognition
Palm touch
for 3 sec
Enter the User PIN Code
then touch the keypad
with your palm
Scan
Fingerprint
1. Front Body (installation on the outside of the door)
2. Basic Contents
3. Specifications
4. Main Body 7. Setting Menu
8. Product Features 13. Lock Door
(installation on the inside of the door)
9. Normal Mode (Default Mode) 10. Unlocking Door with Code
11. Unlocking Door with Fingerprint
12. Unlocking Door with Smart Etiquette
Basic Contents To close door from outside
Optional Accessories
Front Body Main Body
Main Bracket
Magnet for
a single door
Last up to 1year
(10 times used a day)
Icon Description
Step
Manual lock status
Auto lock status
Touch the keypad in the front body gently
with your palm to lock a door.
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
To close door from inside
Icon Description
Step
Manual lock status
(The default setting)
Auto lock status
Turn the manual thumb turn to
unlock pressing buttons together
The built-in Auto Lock sensor automatically
locks a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed,
you cannot enable the auto-lock feature.)
Press open / close button
YDG413A
How to press set button of remote controller
Press the set(registration) button located on the front of remote
controller. You can press it using a pin like the picture.
Normal Mode: Without a designated person, anyone who knows ‘User PIN
Code’ has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has
authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock
and automatically deleted after usage.
User Slot Number: It should be 2 digits(like ’01’, ‘02’…’99’, ‘00’) and available
in advanced mode.
Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or
complete the session
Enter User Fingerprint
(Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features
OR
OR
OR
Volume Control
High
Low
Mute
Registr
-ation
Delete
Automatic Lock
PIN CODE
U
OR
OR
5. Front Body5. Front Body
1 Keypad(10-key)
2
Low Battery Indicator
3 Fingerprint scanning area
4
Emergency Power Supply terminal
6. Main Body
5
6
1.5V AA Alkaline Batteries (4PCS)
7
Battery cover
8
Slot for Remote control module (Optional)
9
Manual Thumb Turn
11
Open / Close button
10
Internal Forced Lock Switch
12
Dead Bolt
Registration button
•User Manual
• Installation Guide
•AA Batteries X 4
•Screws
• Remote Controller
• Remote Control
Module
• Bluetooth Module
※The duraility depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
※Please check the deadbolt as it turns to standby mode and stop when closing door.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
Operating temperature :
-15 55°C
4EA 1.5 AA alkaline batteries
(Operating voltage : 4.5 ~ 6V)
Parts Specifications Remarks
Front Body
Battery
Main Body
72.8 (W) X 186 (H) X 14 (D) mm
77.5 (W) X 190.5 (H) X 48.8 (D) mm
Up to 5EA
OR
Registr
-ation
Bluetooth setting (Yale Access app)
PIN CODE
U
Please note the following when using Yale Access Bluetooth App.
- Depending on product type or FW version, app registration and door lock connection in normal mode may not
be possible, so if registration is not possible, change from normal mode to master mode and try again.
[ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
- Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to
master code when registering APP in normal mode.
- Please be informed that all registered credentials will be deleted when changing mode or registering and
deleting app.
Set up a new device in the app

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY

When the door is unlocked from outside based upon proper authentication,
the External forced lock will be released.
User Guide
YDG413A
14. External Forced Lock 21. Master Mode
External Forced Lock Setting - User Code
16. 3-minute Lock Out Feature
Releasing External Forced Lock Setting
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
15. Internal Forced Lock
Step
Press the Open / Close button for
5 seconds. Until you hear 3 beeps.
Release
Press the Registration button or,
Turn the manual thumb turn to Pressing
buttons together.
If an invalid user code or fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons on the front body are not activated
for three minutes.
To Release 3-minute Lock Out
Press the open / close button.
Press button.
External Forced Lock Setting - Fingerprint Master mode is a mode in which only the administrator can set the door lock
and provide access to other users. 100ea user passwords, 100ea fingerprint
and individual registration and deletion of one-time passwords enable efficient
management of visitors.
Scan with registered fingerprint and hold
the fingerprint area until you hear 3 beep sounds.
20. Remote Control Module
Buy the Remote Control Module and
install it to link the Remote Control
Remote Control Module
Install Remote Control Module
1. Remove batteries
Open the battery cover
in the Back Body
and remove
all batteries
3. Insert batteries
Insert all the batteries
by checking the ,
connector.
4. Close battery cover
Make sure the module is
correctly mounted with
the sound Ting-a-ling.
2. Install Remote
Control Module
Equip the
Remote Control Mudule
to the connector.
18. Emergency Power Supply for Discharged Batteries
IconStep Description
Contact the 9V
Alkaline battery
Touch with palm
or Enter button
Touch with a palm
Enter User PIN Code
Open the emergency cover.
Keep contacting the 9V Alkaline battery onto
the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch the keypad gently with your palm or
Enter button to confirm.
1
2
3
4
Continue / Complete
Change
Mode New Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode New Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation New Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Registr
-ation
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
19. Power supply
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
ISL-1857-00-017
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
※ If compulsory external lock is setup, the door open / close button will not function.
The alarm will go off if one tries to open the door through the manual opening/closing unit.
※To open the door with the manual opening / closing unit under compulsory external lock setting,
one must completely turn the know within one second. Or else, the door will lock ifself again.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
Fingerprint / PIN Code
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
※
※Voice guidance function : The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
※All registered passwords and other credentials can be deleted at the time of mode change.
※Please install(register) the network module when you want to use a remote control or home network.
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
OR
OR
•
Do not install the digital door lock in an outdoor environment.
•
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock
and damage the product.
•
Do not use force with a tool onto the product.
•
Make sure to lock the door tight when you go out.
•
Be careful not to hit the handle as it may cause injuries.
•
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
•
It is recommended to change User Code on a regular basis.
•
In manual lock mode, make sure to double check
whether the door is securely locked.
•
When External Forced lock is set and unlock the door,
the alarm will be activated.
•
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
•
Make sure to follow the above instructions to avoid any injuries.
•
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Do not install the digital door
lock in an outdoor environment.
22. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
23. Safety and Warning
17. Unlocking Door with Fake Code
Palm touch Palm touchEnter the user code
and fake code
Enter the fake code
and user code
OR
There is no limitation for
digits of Fake PIN Code.
Part of ASSA ABLOY