Yealink SIP-T29G User manual

1
Quick Start Guide
Yealink IP Phone – SIP-T29G
Yealink IP Phone
SIP-T29G
Developed by: BUROSERV Australia
Level 2, 9 Help Street Chatswood NSW 2067. Australia
Version 1.0
QUICK START GUIDE
30 January 2020
Applies to firmware version 46.81.0.15 or later.

2
Quick Start Guide
Yealink IP Phone – SIP-T29G
Contents
Packaging Contents .........................................................................................................................................3
Assembling the Phone .....................................................................................................................................3
Startup.............................................................................................................................................................6
Configuring Your Phone...................................................................................................................................6
Configuring via web user interface ...................................................................................................6
Configuring via phone user interface................................................................................................7
Basic Call Features ...........................................................................................................................................7
Placing a Call .....................................................................................................................................7
Answering a Call ................................................................................................................................8
Ending a Call......................................................................................................................................8
Redial ................................................................................................................................................8
Call Mute and Un-mute.....................................................................................................................8
Call Hold and Resume .......................................................................................................................8
Call Transfer ......................................................................................................................................8
Call Forward ......................................................................................................................................9
Call Conference .................................................................................................................................9
Speed Dial .........................................................................................................................................9
Voice Message ................................................................................................................................10
Customizing Your Phone................................................................................................................................10
Call History ......................................................................................................................................10
Contact Directory ............................................................................................................................10
Volume Adjustment ........................................................................................................................10
Ring Tones.......................................................................................................................................11

3
Quick Start Guide
Yealink IP Phone – SIP-T29G
PACKAGING CONTENTS
The following items are included in your package. If you find anything missing, contact your system
administrator:
Note:
•We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in reduced performance.
ASSEMBLING THE PHONE
1. Attach the stand, as shown below:
Note:
•You can also mount the phone to a wall. For more information on how to attach the wall mount bracket,
refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.

4
Quick Start Guide
Yealink IP Phone – SIP-T29G
2. Connect the handset and optional headset, as shown below:
Note:
•The headset or wireless headset adapter EHS36 should be purchased separately.
•The EXT port can also be used to connect the expansion module EXP20. For more information on how to
use the EHS36 and EXP20, refer to Yealink EHS36 User Guide and Yealink EXP20 User Guide.
3. Connect the USB flash drive, as shown below:
Note:
•The USB port can also be used to connect the Bluetooth USB dongle BT40 or Wi-Fi USB dongle WF40.
The Bluetooth USB dongle BT40 and Wi-Fi USB dongle WF40 should be purchased separately. For more
information on how to use the BT40 and WF40, refer to Yealink Bluetooth USB Dongle BT40 User Guide
and Yealink Wi-Fi USB Dongle WF40 User Guide.

5
Quick Start Guide
Yealink IP Phone – SIP-T29G
4. Connect the network and power, as shown below:
Note:
•The IP phone should be used with Yealink original power adapter (5V/1.2A) only. The use of the
third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone,
we recommend that you use the Ethernet cable provided by Yealink.
•If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch
is PoE-compliant.

6
Quick Start Guide
Yealink IP Phone – SIP-T29G
STARTUP
After the IP phone is connected to the network and supplied
with power, it automatically begins the initialization process.
After startup, the phone is ready for use. You can configure the
phone via web user interface or phone user interface.
CONFIGURING YOUR PHONE
CONFIGURING VIA WEB USER INTERFACE
Accessing the web user interface:
1. Press the OK key when the phone is idle to obtain the IP address of the phone.
2. Open a web browser on your computer, enter the IP address into the address bar
(e.g., "http://192.168.0.10" or "192.168.0.10"), and then press the Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Network Settings: Click on Network->Basic->IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid
network settings, e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If the phone cannot contact a DHCP server for any reason, you need to configure the
IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the phone
manually.
Note:
•The IP phone also supports IPv6, but IPv6 is disabled by default.
•The wrong network settings may result in inaccessibility of the phone and may have an impact on
the network performance. Contact your system administrator for more information.
Account Settings: Click on Account->Register->Account X (X=1,2,3...15,16)
Parameters of the account:
Register Status: It shows the register status of the current account.
Line Active: You can select Enabled/Disabled to enable/disable the account.
Label: It is shown on the LCD screen to identify the account.
Display Name: It is shown as Caller ID when placing a call.
User Name: It is provided by ITSP for registration (required).
Register Name: It is an authenticated ID for authentication provided by ITSP (required).
Password: It is provided by ITSP for registration (required).
Server Host: It is provided by ITSP for registration (required).

7
Quick Start Guide
Yealink IP Phone – SIP-T29G
Register status icons on the LCD screen:
(Green) Registered (Yellow) Registering (Gray) Register Failed
Note:
•Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.
CONFIGURING VIA PHONE USER INTERFACE
Network Settings:
Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password:
admin)->Network->WAN Port/VLAN/Web Server/802.1x/VPN/LLDP/CDP/NAT to configure the network.
Account Settings:
Press the Menu soft key when the phone is idle, select Advanced (default password: admin)->Accounts to
configure the account.
Note:
•For more information on account parameters, refer to Configuring via web user interface above.
BASIC CALL FEATURES
PLACING A CALL
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press .
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press the Send soft key.
Note:
•During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires
a connected headset.

8
Quick Start Guide
Yealink IP Phone – SIP-T29G
ANSWERING A CALL
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
ENDING A CALL
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
Press or the EndCall soft key.
Using the headset:
Press the EndCall soft key.
REDIAL
•Press to enter the Placed Calls list, press or to select the desired entry, and then press or
the Send soft key.
•Press twice when the phone is idle to dial out the last dialed number.
CALL MUTE AND UN-MUTE
•Press to mute the microphone during a call.
•Press again to un-mute the call.
CALL HOLD AND RESUME
To place a call on hold:
Press or the Hold soft key during an active call.
To resume the call, do one of the following:
•If there is only one call on hold, press or the Resume soft key.
•If there is more than one call on hold, press or to select the desired call,
and then press or the Resume soft key.
CALL TRANSFER
You can transfer a call in the following ways:
Blind Transfer
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press or the Transfer soft key.
Note:
•You can reject an incoming call by pressing the Reject soft key.

9
Quick Start Guide
Yealink IP Phone – SIP-T29G
Semi-Attended Transfer
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or the Transfer soft key when the second party answers.
CALL FORWARD
To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, press or to select the desired
ring time to wait before forwarding from the After Ring Time field.
4. Press the Save soft key to accept the change.
CALL CONFERENCE
1. Press or the Conference soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conference soft key when the second party answers. All parties are now joined in the
conference.
4. Press the End Call soft key to disconnect all parties.
SPEED DIAL
To configure a speed dial key:
1. Press the Menu soft key when the phone is idle, and then select Features->DSS Keys.
2. Select the desired DSS key, and then press the Enter soft key.
3. Select Speed Dial from the Type field, select the desired line from the Account ID field, enter a label in
the Label field and then enter the number in the Value field.
4. Press the Save soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
Note:
• You can split the conference call into two individual calls by pressing the
Split
soft key.

10
Quick Start Guide
Yealink IP Phone – SIP-T29G
VOICE MESSAGE
Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the
message center. The power indicator LED slowly flashes red and the MESSAGE key LED lights up.
To listen to voice messages:
1.Press or the Connect soft key.
2.Follow the voice prompts to listen to your voice messages.
CUSTOMIZING YOUR PHONE
CALL HISTORY
1. Press the History soft key when the phone is idle, press or to scroll through the list.
2. Select an entry from the list, you can do the following:
•Press the Send soft key to place a call.
•Press the Delete soft key to delete the entry from the list.
If you press the Option soft key, you can also do the following:
•Select Detail to view detailed information about the entry.
•Select Add to Contact to add the entry to the local directory.
•Select Add to Blacklist to add the entry to the blacklist.
•Select Delete All to delete all entries from the list.
CONTACT DIRECTORY
To add a contact:
1.Press the Directory soft key when the phone is idle, and then select All Contacts.
2.Press the Add soft key to add a contact.
3.Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
4.Press the Add soft key to accept the change.
To edit a contact:
1. Press the Directory soft key when the phone is idle, and then select All Contacts.
2. Press or to select the desired contact, press the Option soft key and then select Detail from the
prompt list.
3. Edit the contact information.
4. Press the Save soft key to accept the change.
To delete a contact:
1. Press the Directory soft key when the phone is idle, and then select All Contacts.
2. Press or to select the desired contact, press the Option soft key and then select Delete from the
prompt list.
3. Press the OK soft key when the LCD screen prompts “Delete selected item?”.
VOLUME ADJUSTMENT
•Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
•Press when the phone is idle or ringing to adjust the ringer volume.
•Press to adjust the media volume in the corresponding screen.
Note:
•You can add contacts from call history easily. For more information, refer to
Call History
above.

11
Quick Start Guide
Yealink IP Phone – SIP-T29G
RING TONES
1. Press the Menu soft key when the phone is idle, and then select Basic->Sound->Ring Tones.
2. Press or to select Common or the desired account and then press the Enter soft key.
3. Press or to select the desired ring tone.
4. Press the Save soft key to accept the change.

12
Quick Start Guide
Yealink IP Phone – SIP-T29G
About us
Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has
been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price
for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of
global collaboration to extend the value of network communications.
More about Yealink
Since 2001, Yealink has continued to develop state-of-the art, hi-tech VoIP communication
terminals that include IP video phones, IP phones and USB phones. With a worldwide market in
more than 140 countries, the company has also established a first-class international service network.
Our priorities are quality, functionality, ease-of-use, customer support and competitive pricing. To
provide new solutions for the future in this fast-evolving sector, Yealink’s large, talented and
highly-experienced VoIP R&D team is totally committed to the pursuit of excellence.
To date, we have passed more than 80 interoperability tests and meet certification requirements set by
leading VoIP system and platforms. Yealink works in close partnership with T-Mobile, Telefonica,
Portugal Telecom and other leading telecommunication service providers.