Yealink SIP-T33G User manual

For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice
Quick Reference Guide: Yealink SIP-T33G, T40G, T42S, T43U
PLACE CALLS
Using the handset
Dial the number you are calling, then pick up the handset.
Note: You may place a call by picking up the handset before dialing. Just be aware,
the system will attempt to complete the call after a slight pause in entering digits on the dialpad.
Using the speakerphone
With the handset in the cradle, dial the number you are calling then
press or the Send soft key.
ANSWER CALLS
Using the handset
When a call comes in, pick up the handset.
Using the speakerphone
When a call comes in, press , the blinking line key, or the
Answer soft key.
Answer a second call
When a second call comes in, press the Answer soft
key or the blinking line key. The active call is
automatically placed on hold.
HOLD AND RESUME CALLS
Place a call on hold
Press the Hold soft key during an active call. The line key controlling that call will blink.
Resume a held call
Press the blinking line key or the Resume soft key.
Note: You may need to press or on the navigation dial to select the desired call before you see the
Resume sof t key.
PHONE LAYOUT
Line keys
Line keys programmed to an extension
control inbound and outbound calls.
Line keys programmed to an extension
indicate the status of the call being controlled
by the key.
• Blinking green = incoming call or call on
hold
• Solid green = active
Line keys not programmed to an extension
may be programmed as speed dials, etc.
Soft keys
Soft keys appear at the bottom of your
screen and their functions change depending
on where you are in a call sequence.
Watching your soft keys is one of the most
helpful things you can do when using your
phone. In almost all cases, the thing you are
most likely to do next in a call sequence will
appear as a soft key.
Buttons
Physical buttons always perform the function
for which they are labeled.
Line key
placement varies
by model

TRANSFER CALLS
Blind transfer
Send a call directly to a recipient without speaking to the recipient first.
To blind transfer a call:
1. Press the Transfer soft key during an active call. The
call is automatically placed on hold.
2. Enter the number to which you want to transfer the
call.
3. Press the B Transfer soft key.
Consultative transfer
Speak to the transfer recipient before sending the caller
through.
To complete a consultative transfer:
1. Press the Transfer soft key during an
active call. The call is automatically
placed on hold.
2. Place a call to the transfer recipient by entering their number then pressing the
Send/Call soft key or waiting for the call to complete.
3. When the transfer recipient answers, if they are available to take the call, press
the Transfer soft key again to complete the transfer.
Direct to voicemail transfer
1. Press the Transfer soft key during an active call. The call is automatically
placed on hold.
2. To transfer to a four-digit extension, enter *90 followed by the number to which
you want to transfer the call. To transfer to a five or six-digit extension, enter *
followed by the number to which you want to transfer the call.
3. Press the B Transfer soft key.
Return to the original caller
At any point before completing a transfer, you may take the original caller off hold
by pressing the blinking line key or the Resume soft key.
VOICEMAIL
Set up voicemail
If voicemail is available for your extension, the system will walk you
through your voicemail setup the first time you press the button.
Check voicemail from your phone
Once you have set up your voicemail, press the button and follow
the prompts.
MAKE CONFERENCE CALL
The Yealink SIP-T33G and SIP-T43U feature 5-way conferencing. The
Yealink SIP-T40G and SIP-T42S feature 3-way conferencing.
Press the Conference soft key during an active call. The active call is
automatically placed on hold.
Enter the number of the party you would like to
conference in, and then press the Send soft key or wait for the call to complete.
When the second party answers, press the Conference soft key again. All parties
are now joined in the conference.
Press the Split soft key to split the conference call into two individual calls.
Press the EndCall soft key to disconnect all parties.
MUTE AND UNMUTE MICROPHONE
Press the microphone mute button to mute the microphone during a call.
Press the microphone mute button again
to unmute the microphone during a call.
Quick Reference Guide: Yealink SIP-T33G, T40G, T42S, T43U
For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice