Yealink SIP-T2XP Service manual

Copyright © 2013 YEALINK NETWORK TECHNOLOGY
Copyright © 2013 Yealink Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written
permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes
translating into another language or format.
When this publication is made available on media, Yealink Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private
use but not for redistribution. No parts of this publication may be subject to alteration,
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any
damages arising from use of an illegally modified or altered publication.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.
YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this guide.
Hereby, Yealink Network Technology CO., LTD. declares that this phone is in conformity
with the essential requirements and other relevant provisions of the CE, FCC.
This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.

Note: This device is tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experience radio/TV technician for help.
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
We are striving to improve our documentation quality and we appreciate your feedback. Email
your opinions and comments to [email protected].

Yealink IP phone firmware contains third-party software under the GNU General Public License (GPL).
Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and
conditions of the license.
The original GPL license, source code of components licensed under GPL and used in Yealink products can
be downloaded from Yealink web site:
http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293.

About This Guide
v
This guide is intended for administrators who need to properly configure, customize,
manage, and troubleshoot the IP phone system rather than end-users. It provides
details on the functionality and configuration of IP phones.
Many of the features described in this guide involve network settings, which could affect
the IP phone’s performance in the network. So an understanding of IP networking and a
prior knowledge of IP telephony concepts are necessary.
This guide covers SIP-T28P, SIP-T26P, SIP-T22P, SIP-T21P, SIP-T20P and SIP-T19P IP phones. The
following related documents are available:
Quick Installation Guides, which describe how to assemble IP phones.
Quick Reference Guides, which describe the most basic features available on IP
phones.
User Guides, which describe the basic and advanced features available on IP
phones.
Auto Provisioning Guide, which describes how to provision IP phones using the
configuration files.
<y0000000000xx>.cfg and <MAC>.cfg template configuration files.
IP Phones Deployment Guide for BroadSoft UC-One Environments, which describes
how to configure BroadSoft features on the BroadWorks web portal and IP phones.
For support or service, please contact your Yealink reseller or go to Yealink Technical
Support online: http://www.yealink.com/Support.aspx.
The information detailed in this guide is applicable to firmware version 72 or higher. The
firmware format is like x.x.x.x.rom. The second x from left must be greater than or equal
to 72 (e.g., the firmware version of SIP-T28P IP phone: 2.72.0.1.rom). This administrator
guide includes the following chapters:
Chapter 1, “Product Overview” describes the SIP components and SIP IP phones.
Chapter 2, “Getting Started” describes how to install and connect IP phones and
the configuration methods.
Chapter 3, “Configuring Basic Features” describes how to configure the basic
features on IP phones.

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
vi
Chapter 4, “Configuring Advanced Features” describes how to configure the
advanced features on IP phones.
Chapter 5, “Configuring Audio Features” describes how to configure the audio
features on IP phones.
Chapter 6, “Configuring Security Features” describes how to configure the security
features on IP phones.
Chapter 7, “Upgrading Firmware” describes how to upgrade firmware of IP
phones.
Chapter 8, “Resource Files” describes the resource files that can be downloaded
by IP phones.
Chapter 9, “Troubleshooting” describes how to troubleshoot IP phones and
provides some common troubleshooting solutions.
Chapter 10, “Appendix” provides the glossary, reference information about IP
phones compliant with RFC 3261, SIP call flows and the sample configuration files.
This section describes the changes to this guide for each release and guide version.
The following section is new for this version:
Power Indicator LED on page 40
Major updates have occurred to the following sections:
DHCP on page 21
Replace Rule on page 33
Dial-now on page 34
Contrast on page 42
Backlight on page 43
Time and Date on page 50
Key as Send on page 64
Anonymous Call on page 81
LDAP on page 139
Busy Lamp Field on page 142
Action URL on page 163
IPv6 Support on page 196
Transport Layer Security on page 211

About This Guide
vii
Upgrading Firmware on page 225
Resource Files on page 229
Documentations of the newly released SIP-T19P and SIP-T21P IP phones have also been
added.
Major updates have occurred to the following sections:
Action URL on page 163
Action URI on page 166
Major updates have occurred to the following sections:
Logo Customization on page 59
Anonymous Call on page 81
Distinctive Ring Tones on page 131
Server Redundancy on page 169
Transport Layer Security on page 211
Secure Real-Time Transport Protocol on page 217
Encrypting Configuration Files on page 219
Local Contact File on page 233
Viewing Log Files on page 241
Capturing Packets on page 244
Major updates have occurred to the following section:
Appendix B: Time Zones on page 257
Major updates have occurred to the following section:
Configuring DSS Key on page 399

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
viii
The following sections are new for this version:
Hot Desking on page 162
TR-069 Device Management on page 194
IPv6 Support on page 196
Major updates have occurred to the following sections:
Configuring Network Parameters Manually on page 24
Softkey Layout on page 61
Directed Call Pickup on page 107
Distinctive Ring Tones on page 131
Automatic Call Distribution on page 149
Action URL on page 166
Server Redundancy on page 169
VLAN on page 179
Transport Layer Security on page 211
Local Contact File on page 233
The following sections are new for this version:
Configuring Network Parameters Manually on page 24
Contrast on page 42
Backlight on page 43
Logo Customization on page 59
Softkey Layout on page 61
Key as Send on page 64
Call Log on page 68
Live Dialpad on page 73
Auto Answer on page 77
Call Completion on page 79
Anonymous Call on page 81
Anonymous Call Rejection on page 82
Busy Tone Delay on page 88

About This Guide
ix
Return Code When Refuse on page 89
Early Media on page 90
180 Ring Workaround on page 90
Use Outbound Proxy in Dialog on page 92
SIP Session Timer on page 93
Session Timer on page 94
Call Return on page 115
Transfer via DTMF on page 125
Intercom on page 126
Music on Hold on page 148
Automatic Call Distribution on page 149
Message Waiting Indicator on page 151
Multicast Paging on page 153
Call Recording on page 158
LLDP on page 176
VLAN on page 179
VPN on page 182
Quality of Service on page 185
Configuring Audio Features on page 199
Secure Real-Time Transport Protocol on page 217
Appendix B: Time Zones on page 257
Phone user interface for each feature
Major updates have occurred to the following sections:
Creating Dial Plan on page 32
Transport Layer Security on page 211
Encrypting Configuration Files on page 219
Troubleshooting on page 241
Web user interface for each feature
The following sections are new for this version:
Dialog Info Call Pickup on page 113
Web Server Type on page 117
Tones on page 135

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
x
Hot Desking on page 162
Action URL on page 166
Action URI on page 166
Resource Files on page 229
Appendix C: Configuration Parameters on page 260
Appendix F: Sample Configuration File on page 470
Major updates have occurred to the following sections:
Creating Dial Plan on page 32
Phone Lock on page 48
Time and Date on page 50
Busy Lamp Field on page 142

Table of Contents
xi
About This Guide ...................................................................... v
Documentations...............................................................................................................................v
In This Guide ....................................................................................................................................v
Summary of Changes .................................................................................................................... vi
Changes for Release 72, Guide Version 72.1........................................................................ vi
Changes for Release 71, Guide Version 71.165................................................................... vii
Changes for Release 71, Guide Version 71.141................................................................... vii
Changes for Release 71, Guide Version 71.140................................................................... vii
Changes for Release 71, Guide Version 71.125................................................................... vii
Changes for Release 71, Guide Version 71.120................................................................... vii
Changes for Release 71, Guide Version 71.110.................................................................. viii
Changes for Release 70, Guide Version 70......................................................................... viii
Changes for Release 70, Guide Version 2.0.......................................................................... ix
Table of Contents .................................................................... xi
Product Overview..................................................................... 1
VoIP Principle....................................................................................................................................1
SIP Components...............................................................................................................................2
SIP IP Phone Models........................................................................................................................3
Physical Features of IP Phones ................................................................................................4
Key Features of IP Phones......................................................................................................10
Getting Started....................................................................... 13
Connecting the IP Phones .............................................................................................................13
Initialization Process Overview ....................................................................................................16
Verifying Startup ............................................................................................................................17
Configuration Methods.................................................................................................................18
Phone User Interface..............................................................................................................18
Web User Interface ................................................................................................................18
Configuration Files..................................................................................................................18
Reading Icons ................................................................................................................................20
Configuring Basic Network Parameters ......................................................................................21
DHCP .......................................................................................................................................21
Configuring Network Parameters Manually ........................................................................24
PPPoE .......................................................................................................................................27

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
xii
Configuring Transmission Methods of the Internet Port and PC Port .................................28
Configuring PC Port Mode.....................................................................................................30
Creating Dial Plan .........................................................................................................................32
Replace Rule ...........................................................................................................................33
Dial-now ..................................................................................................................................34
Area Code...............................................................................................................................36
Block Out................................................................................................................................. 37
Configuring Basic Features .................................................... 39
Power Indicator LED ......................................................................................................................40
Contrast ..........................................................................................................................................42
Backlight.........................................................................................................................................43
User Password ...............................................................................................................................45
Administrator Password ................................................................................................................46
Phone Lock .....................................................................................................................................48
Time and Date ...............................................................................................................................50
Language .......................................................................................................................................56
Loading Language Packs ...................................................................................................... 57
Specifying the Language to Use...........................................................................................58
Logo Customization .......................................................................................................................59
Softkey Layout................................................................................................................................61
Key as Send ...................................................................................................................................64
Hotline ............................................................................................................................................66
Call Log...........................................................................................................................................68
Missed Call Log .............................................................................................................................69
Local Directory...............................................................................................................................70
Live Dialpad...................................................................................................................................73
Call Waiting....................................................................................................................................73
Auto Redial.....................................................................................................................................76
Auto Answer...................................................................................................................................77
Call Completion.............................................................................................................................79
Anonymous Call............................................................................................................................. 81
Anonymous Call Rejection ............................................................................................................82
Do Not Disturb................................................................................................................................84
Busy Tone Delay.............................................................................................................................88
Return Code When Refuse ............................................................................................................89
Early Media....................................................................................................................................90
180 Ring Workaround ....................................................................................................................90
Use Outbound Proxy in Dialog.....................................................................................................92
SIP Session Timer ...........................................................................................................................93
Session Timer .................................................................................................................................94
Call Hold.........................................................................................................................................96
Call Forward ..................................................................................................................................98
Call Transfer .................................................................................................................................103

Table of Contents
xiii
Network Conference ...................................................................................................................105
Transfer on Conference Hang Up ..............................................................................................106
Directed Call Pickup.................................................................................................................... 107
Group Call Pickup........................................................................................................................110
Dialog Info Call Pickup................................................................................................................113
Call Return ....................................................................................................................................115
Call Park .......................................................................................................................................116
Web Server Type..........................................................................................................................117
Calling Line Identification Presentation..................................................................................... 119
Connected Line Identification Presentation ..............................................................................121
DTMF............................................................................................................................................. 121
Suppress DTMF Display .............................................................................................................. 124
Transfer via DTMF ........................................................................................................................125
Intercom........................................................................................................................................126
Outgoing Intercom Calls......................................................................................................126
Incoming Intercom Calls ......................................................................................................128
Configuring Advanced Features...........................................131
Distinctive Ring Tones ..................................................................................................................131
Tones .............................................................................................................................................135
Remote Phone Book ....................................................................................................................137
LDAP..............................................................................................................................................139
Busy Lamp Field...........................................................................................................................142
Music on Hold .............................................................................................................................. 148
Automatic Call Distribution .........................................................................................................149
Message Waiting Indicator ........................................................................................................151
Multicast Paging ..........................................................................................................................153
Sending RTP Stream.............................................................................................................153
Receiving RTP Stream ..........................................................................................................155
Call Recording .............................................................................................................................158
Hot Desking..................................................................................................................................162
Action URL ....................................................................................................................................163
Action URI.....................................................................................................................................166
Server Redundancy.....................................................................................................................169
SIP Server Domain Name Resolution..................................................................................173
LLDP...............................................................................................................................................176
VLAN .............................................................................................................................................179
VPN................................................................................................................................................182
Quality of Service ........................................................................................................................185
Network Address Translation .....................................................................................................187
802.1X Authentication .................................................................................................................189
TR-069 Device Management ......................................................................................................194
IPv6 Support ................................................................................................................................. 196

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
xiv
Configuring Audio Features ..................................................199
Headset Prior ...............................................................................................................................199
Dual Headset...............................................................................................................................200
Audio Codecs ..............................................................................................................................201
Acoustic Clarity Technology........................................................................................................205
Acoustic Echo Cancellation ................................................................................................. 205
Voice Activity Detection .......................................................................................................206
Comfort Noise Generation ..................................................................................................207
Jitter Buffer ............................................................................................................................208
Configuring Security Features...............................................211
Transport Layer Security..............................................................................................................211
Secure Real-Time Transport Protocol.......................................................................................... 217
Encrypting Configuration Files ...................................................................................................219
Upgrading Firmware.............................................................225
Resource Files........................................................................229
Replace Rule Template ...............................................................................................................229
Dial-now Template.......................................................................................................................230
Softkey Layout Template.............................................................................................................231
Local Contact File ........................................................................................................................233
Remote XML Phone Book............................................................................................................234
Directory Template ......................................................................................................................235
Super Search Template...............................................................................................................237
Specifying the Access URL of Resource Files ............................................................................238
Troubleshooting.....................................................................241
Troubleshooting Methods ........................................................................................................... 241
Viewing Log Files..................................................................................................................241
Capturing Packets ................................................................................................................244
Enabling Watch Dog Feature .............................................................................................. 245
Getting Information from Status Indicators........................................................................246
Analyzing Configuration File ...............................................................................................246
Troubleshooting Solutions ...........................................................................................................247
Why is the LCD screen blank? .............................................................................................247
Why doesn’t the IP phone get an IP address? ...................................................................247
Why does the IP phone display “No Service”? .................................................................248
How do I find the basic information of the IP phone?.......................................................248
Why doesn’t the IP phone upgrade firmware successfully?.............................................248

Table of Contents
xv
Why doesn’t the IP phone display time and date correctly? ...........................................248
Why do I get poor sound quality during a call? ................................................................248
What is the difference between a remote phone book and a local phone book? ....... 249
What is the difference among user name, register name and display name? .............249
How to reboot the IP phone remotely? ..............................................................................249
Why does the IP phone use DOB format logo file instead of popular BMP, JPG and so on?
................................................................................................................................................250
How to increase or decrease the volume?........................................................................250
What will happen if I connect both PoE cable and power adapter? Which has the higher
priority?..................................................................................................................................250
What is auto provisioning? ..................................................................................................250
What is PnP? ..........................................................................................................................250
Why doesn’t the IP phone update the configuration? ......................................................251
What do “on code” and “off code” mean? .......................................................................251
How to solve the IP conflict problem? ................................................................................ 251
How to reset the IP phone to factory configurations?.......................................................251
How to restore the administrator password? ....................................................................252
What are the main differences among SIP-T28P, IP-T26P, SIP-T22P, SIP-T21P, SIP-T20P and
SIP-T19P IP phones?...............................................................................................................252
Appendix ...............................................................................255
Appendix A: Glossary.................................................................................................................255
Appendix B: Time Zones.............................................................................................................257
Appendix C: Configuration Parameters ....................................................................................260
Setting Parameters in Configuration Files..........................................................................260
Basic and Advanced Parameters.......................................................................................260
Audio Feature Parameters................................................................................................... 376
Security Feature Parameters ...............................................................................................384
Upgrading Firmware ...........................................................................................................389
Resource Files .......................................................................................................................392
Troubleshooting ....................................................................................................................397
Configuring DSS Key ............................................................................................................ 399
Appendix D: SIP (Session Initiation Protocol)............................................................................422
RFC and Internet Draft Support ..........................................................................................422
SIP Request............................................................................................................................425
SIP Header ............................................................................................................................426
SIP Responses .......................................................................................................................427
SIP Session Description Protocol (SDP) Usage .................................................................. 430
Appendix E: SIP Call Flows .........................................................................................................430
Successful Call Setup and Disconnect ...............................................................................431
Unsuccessful Call Setup—Called User is Busy ..................................................................433
Unsuccessful Call Setup—Called User Does Not Answer ................................................435
Successful Call Setup and Call Hold.................................................................................. 438
Successful Call Setup and Call Waiting ............................................................................. 441

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
xvi
Call Transfer without Consultation ......................................................................................446
Call Transfer with Consultation............................................................................................450
Always Call Forward............................................................................................................455
Busy Call Forward ................................................................................................................459
No Answer Call Forward .....................................................................................................462
Call Conference.................................................................................................................... 465
Appendix F: Sample Configuration File ....................................................................................470
Index ......................................................................................477

Product Overview
1
This chapter contains the following information about IP phones:
VoIP Principle
SIP Components
SIP IP Phone Models
VoIP
VoIP (Voice over Internet Protocol) is a technology using the Internet Protocol instead of
traditional Public Switch Telephone Network (PSTN) technology for voice
communications.
It is a family of technologies, methodologies, communication protocols, and
transmission techniques for the delivery of voice communications and multimedia
sessions over IP networks. The H.323 and Session Initiation Protocol (SIP) are two
popular VoIP protocols that are found in widespread implementation.
H.323
H.323 is a recommendation from the ITU Telecommunication Standardization Sector
(ITU-T) that defines the protocols to provide audio-visual communication sessions on
any packet network. The H.323 standard addresses call signaling and control,
multimedia transport and control, and bandwidth control for point-to-point and
multi-point conferences.
It is widely implemented by voice and video conference equipment manufacturers, is
used within various Internet real-time applications such as GnuGK and NetMeeting and
is widely deployed by service providers and enterprises for both voice and video
services over IP networks.
SIP
SIP (Session Initiation Protocol) is the Internet Engineering Task Force’s (IETF’s) standard
for multimedia conferencing over IP. It is an ASCII-based, application-layer control
protocol (defined in RFC 3261) that can be used to establish, maintain, and terminate
calls between two or more endpoints. Like other VoIP protocols, SIP is designed to
address functions of signaling and session management within a packet telephony
network. Signaling allows call information to be carried across network boundaries.
Session management provides the ability to control attributes of an end-to-end call.

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
2
SIP provides capabilities to:
Determine the location of the target endpoint -- SIP supports address resolution,
name mapping, and call redirection.
Determine media capabilities of the target endpoint -- Via Session Description
Protocol (SDP), SIP determines the “lowest level” of common services between
endpoints. Conferences are established using only media capabilities that can be
supported by all endpoints.
Determine the availability of the target endpoint -- A call cannot be completed
because the target endpoint is unavailable, SIP determines whether the called
party is already on the IP phone or does not answer in the allotted number of rings.
It then returns a message indicating why the target endpoint is unavailable.
Establish a session between the origin and target endpoint -- The call can be
completed, SIP establishes a session between endpoints. SIP also supports mid-call
changes, such as the addition of another endpoint to the conference or the change
of a media characteristic or codec.
Handle the transfer and termination of calls -- SIP supports the transfer of calls from
one endpoint to another. During a call transfer, SIP simply establishes a session
between the transferee and a new endpoint (specified by the transferring party)
and terminates the session between the transferee and the transferring party. At
the end of a call, SIP terminates the sessions between all parties.
SIP is a peer-to-peer protocol. The peers in a session are called User Agents (UAs). A
user agent can function as one of following roles:
User Agent Client (UAC) -- A client application that initiates the SIP request.
User Agent Server (UAS) -- A server application that contacts the user when a SIP
request is received and that returns a response on behalf of the user.
User Agent Client (UAC)
The UAC is an application that initiates up to six feasible SIP requests to the UAS. The six
requests issued by the UAC are: INVITE, ACK, OPTIONS, BYE, CANCEL and REGISTER.
When the SIP session is being initiated by the UAC SIP component, the UAC determines
the information essential for the request, which is the protocol, the port and the IP
address of the UAS to which the request is being sent. This information can be dynamic
and will make it challenging to put through a firewall. For this reason, it may be
recommended to open the specific application type on the firewall. The UAC is also
capable of using the information in the request URI to establish the course of the SIP
request to its destination, as the request URI always specifies the host which is essential.
The port and protocol are not always specified by the request URI. Thus if the request
does not specify a port or protocol, a default port or protocol is contacted. It may be

Product Overview
3
preferential to use this method when not using an application layer firewall. Application
layer firewalls like to know what applications are flowing though which ports and it is
possible to use content types of other applications other than the one you are trying to
let through what has been denied.
User agent server (UAS)
UAS is a server that hosts the application responsible for receiving the SIP requests from
a UAC, and on reception it returns a response to the request back to the UAC. The UAS
may issue multiple responses to the UAC, not necessarily a single response.
Communication between UAC and UAS is client/server and peer-to–peer.
Typically, a SIP endpoint is capable of functioning as both a UAC and a UAS, but it
functions only as one or the other per transaction. Whether the endpoint functions as a
UAC or a UAS depends on the UA that initiates the request.
This section introduces SIP IP phone models. IP phones are endpoints in the overall
network topology, which are designed to interoperate with other compatible
equipments including application servers, media servers, internet-working gateways,
voice bridges, and other endpoints. IP phones are characterized by a large number of
functions, which simplify business communication with a high standard of security and
can work seamlessly with a large number of SIP PBXs.
IP phones provide a powerful and flexible IP communication solution for Ethernet TCP/IP
networks, delivering excellent voice quality. The high-resolution graphic display
supplies content in multiple languages for system status, call log and directory access.
IP phones also support advanced functionalities, including LDAP, Busy Lamp Field, Sever
Redundancy and Network Conference.
The following IP phone models are described:
SIP-T28P
SIP-T26P
SIP-T22P
SIP-T21P
SIP-T20P
SIP-T19P
IP phones comply with the SIP standard (RFC 3261), and they can only be used within a
network that supports this model of phone.
In order to operate as SIP endpoints in your network successfully, IP phones must meet
the following requirements:
A working IP network is established.

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
4
Routers are configured for VoIP.
VoIP gateways are configured for SIP.
The latest (or compatible) firmware of IP phones is available.
A call server is active and configured to receive and send SIP messages.
This section lists the available physical features of IP phones.
SIP-T28P
Physical Features:
-TI TITAN chipset and TI voice engine
-320x160 graphic LCD with 4-level grayscales
-6 VoIP accounts, BroadSoft/Avaya/Asterisk validated
-HD Voice: HD Codec, HD Handset, HD Speaker
-48 keys including 16 DSS keys
-1xRJ9 (4P4C) handset port
-1xRJ9 (4P4C) headset port
-2xRJ45 10/100Mbps Ethernet ports
-1XRJ12 (6P6C) expansion module port
-19 LEDs: 1xpower, 6xline, 1xmessage, 1xheadset, 10xmemory
-Power adapter: AC 100~240V input and DC 5V/1.2A output
-Power over Ethernet (IEEE 802.3af)