Yealink Telkom W52P User manual

The future is exciting.
Ready?
Yealink Cordless
VoIP Phone
Quick Setup Guide for the W52P Model
6732V-FTTH Set-up guide refresh V3.indd 1 2018/06/28 11:12 AM

Contents
Yealink Cordless VoIP Phone W52P Model
Packaging contents 03
Base station description 04
Powering the base station 05
Setting up the charger cradle 06
Setting up the handset 07
Charging the handset 08
Additional handset registration only 09
Still not sorted? 10
6732V-FTTH Set-up guide refresh V3.indd 2 2018/06/28 11:12 AM

3
Packaging contents
Handset Base station Charger cradle Two power adaptors
Belt clip Ethernet cable Two rechargeable
batteries
Quick Installation Guide &
Quick Reference Guide
6732V-FTTH Set-up guide refresh V3.indd 3 2018/06/28 11:12 AM

4
Base station description
Item Description
1 Paging Key Locates a misplaced handset. Toggles the registration mode. Resets the base station to
factory settings.
2 Registration LED Indicates the mode of the base station. Fast flashes when the base station is in the paging mode.
Slow flashes green when the base station is in the registration mode. Illuminates solid when there
is at least one handset registered to the base station.
3 Network Status LED Indicates the network status. Slow flashes green when the network is unavailable.
Illuminates solid green when the network is available.
4 Power Indicator LED Indicates the power status of the base station. Slow flashes green when the base station is during
the firmware upgrading process. Slow flashes green when the base station is during the firmware
resetting process. Illuminates solid green when the base station is powered on.
1
2
4
3
6732V-FTTH Set-up guide refresh V3.indd 4 2018/06/28 11:12 AM

5
• Connect the power adapter head into an electrical socket and then
connect the other end of the power adapter into the charging port on
the base station
• Connect the supplied Ethernet cable between the LAN port on the base
station and the LAN port in your Vodacom router. The Ethernet cable
should be connected to one of the available LAN ports on the router
labelled LAN1, LAN2, LAN3 and LAN4
Powering the base station
6732V-FTTH Set-up guide refresh V3.indd 5 2018/06/28 11:12 AM

6
• Connect the power adapter head into an electrical power outlet
• Connect the other end of the power adapter into the charging port
on the cradle
Setting up the charger cradle
6732V-FTTH Set-up guide refresh V3.indd 6 2018/06/28 11:12 AM

7
• Open the battery cover on the handset
• Insert the batteries in the handset correctly
• Close the battery cover
Setting up the handset
6732V-FTTH Set-up guide refresh V3.indd 7 2018/06/28 11:12 AM

8
• Turn on the handset by pressing and holding the red Power Key until the
LCD screen lights up
• Place the handset in the charger cradle
• The original handset included in the W52P package is pre-registered to
the base station. After charging, the handset is ready for use
Power Key
Charging the handset
6732V-FTTH Set-up guide refresh V3.indd 8 2018/06/28 11:12 AM

9
1 Press and hold the Wi-Fi button at the front of the base station.
2 Press the OK button on the handset to enter into the main menu.
3 Select Settings, then Registration and then Register Handset.
4 Press the Up or Down key to highlight the desired base station and then press the OK soft key.
5 Press the OK key when the LCD screen displays the RFPI code of the base station.
6 Enter the PIN. The default pin is 0000 (four zeros).
7 Press the Done Key.
8 The handset will play the warning tone and prompts “Handset Subscribed”, which indicates the
handset is registered successfully.
Additional handset registration only
6732V-FTTH Set-up guide refresh V3.indd 9 2018/06/28 11:12 AM

10
For a detailed description not covered in this quick setup guide, please refer to the user manual in the Yealink box.
If you have further queries please direct them to the Customer Care on 082 1904 or 08219[email protected]
Still not sorted?
6732V-FTTH Set-up guide refresh V3.indd 10 2018/06/28 11:12 AM

6732V-FTTH Set-up guide refresh V3.indd 11 2018/06/28 11:12 AM