Zeiss CT LUCIA User manual

CT LUCIA
Handling instructions
(EU Version)

EN_32_022_0078I Printed in Germany. CZ-I/2019 International edition: Only for sale in selected countries. The contents of the brochure may differ from the current status of approval of the product or service offering in your country. Please contact our regional representatives for more information. Subject to changes in design and scope of delivery and due to ongoing technical development. CT LUCIA is either a trademark or registered trademark of Carl Zeiss Meditec AG or other companies of the ZEISS Group in Germany and / or other countries. © Carl Zeiss Meditec AG, 2019. All rights reserved.
Preparing the CT LUCIA 621P / 621PY and
CT LUCIA 221P
Verify the lens is central and secure in the IOL chamber Cover the whole lens and blue plunger tip with a generous amount
of OVD. Avoid touching the lens and blue plunger tip.
Close the lid of the IOL chamber. IMPORTANT: Allow the lens to
remain in this position until the surgeon is ready to deliver it to the eye.
Advance the lens to the intermediate position. Gently press the
plunger forward until an audible ‘click’ is heard.
IMPORTANT: The lens should be implanted immediately.
Slowly advance the lens until it has been released from the injector.
If delivery is incomplete, apply additional pressure to the thumb
ange to release the lens.
Carefully position the lens in the capsular bag.
Discard the device. Do not reuse the delivery system.
Carl Zeiss Meditec AG
Goeschwitzer Str. 51–52
07745 Jena
Germany
www.zeiss.com/lucia
www.zeiss.com/med/contacts
0297
CT LUCIA 221P
CT LUCIA 621P / 621PY
12
3 4
56
7