Zest 4 Leisure Philippa Chair User manual

Assembly Instructions
(W x D x H): 0.75m x 0.45m x 0.82m
Product Name: Philippa Chair
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-11.16

Philippa Chair Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Philippa Chair Pack List
Item Description Quantity
ALegAssembly 2
B Rail 2
C Back Board 1
D Seat Assembly 1
Fixings
60mm screws 2
70mm screws 2
120mm screws 8
160mm screws 4
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Philippa Chair is now complete.
1. Attach 2no Rails B to LegAssembliesA using 4no 160mm screws (2no per rail).
(See Figs. 1a & 1b)
2. Position Back Board C centrally into the cut outs on LegAssembliesA and fix
using 2no 60mm Screws (1no per side (Upper)) and 2no 70mm screws (1no per
side (Lower)). (See Fig. 2)
3. Locate Seat Assembly D onto bench assembly and fix in place through underside
of rails using 8no 120mm screws (2no per side rail & 2no per front & back rail).
(See Figs. 3a, 3b & 3c)

www.zest4leisure.co.uk
1b
1a
23a
3b 3c