Zest 4 Leisure Cheltenham Arbour with Storage Box User manual

Assembly Instructions
(W x D x H) 1.44m x 0.66m x 2.23m
Product Name: Cheltenham Arbour with Storage Box
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-11.14

Cheltenham Arbour Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Cheltenham Arbour Pack List
Item Description Quantity
A Side Panel 2
B Back Panel 1
C Front Panel 1
D Floor Panel 1
E Hinged Seat Assembly 1
F Seat Back Rest 1
G Trellis Back Panel 1
H Middle Back Panel 1
J Fascia Board 4
K Roof Panel 2
L Ridge Capping 1
M Pointed Finial 2
Fixings
40mm Screws 15
50mm Screws 14
60mm Screws 28
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit.
Cheltenham Arbour is now complete.
1. Set out Side Panels A and Back Panel B as shown in Fig.1a and fix together using 6no
60mm Screws –3no per side (Fig.1b)
2. Place Front Panel (C) between the Side PanelsA (Fig.2a) and fix in position using 4no
60mm Screws –2no per side (Fig.2b).
3. Locate Floor Panel D on to the floor support battens (Fig.3a) and fix to the floor battens
using 4no 60mm Screws –2no per side.
4. Position the Seas Hinged Assembly E on to the seat support battens (Fig.4a) and fix to
the seat support battens using 4no 60mm Screws –2no per side of rear section of the
Hinged Seat Assembly E (Fig.4b).
5. Position Seat Back Rest F between the Side PanelsA (Fig.5a). Attach to the Hinged
Seat Assembly E using 2no 60mm Screws –1no per side (Fig.5a) and to the Side
PanelsA using 2no 60mm Screws –1no per side (Fig.5b)
6. Attach Trellis Back Panel G to the Middle Back Panel H using 2no 40mm Screws –1no
per side (Fig.6a).
Attach trellis and middle back panel assembly to the Back Panel B using 3no 40mm
Screws –1no per corner and 1no in the middle (Fig.6b).
7. Fix together 2no Fascia Boards J using 1no 60mm Screw. Repeat process for the
remaining 2no Fascia Boards J.
Set the Roof Panels K as shown in Figs. 7b & 7c ensuring the outermost corners of
the Roof Panels K are flush to the top edges of Fascia Boards J (Figs.7b & 7c).
Attach Fascia Boards J to Roof Panels K using 12no 50mm Screws –3 per Fascia
Board J (Fig.7d).
8. Place roof assembly on to Side Panels A (Fig.8a) and fix to the Side PanelsA through
Fascia Boards J using 4no 60mm Screws –1no per Fascia Board. Further attach the
roof assembly to the Trellis Back Panel G through the Fascia Boards J using 2no
50mm Screws –1no per rear Fascia Board J.
9. Attach the Ridge Capping L to the top of Roof Panels K using 6no 40mm Screws –3no
per panel (Fig.9).
10. Position and attach centrally, 2no Pointed Finials M to the Fascia Boards J (front and
back) using 4no 40mm screws –2no per finial (Fig.10)

www.zest4leisure.co.uk
1b1a
2a 2b
3a 3b
4a 4b

www.zest4leisure.co.uk
5b5a
6a 6b
7a 7b
7c 7d

www.zest4leisure.co.uk
8b8a
8c 9
10