ZKTeco FaceKiosk-H13A User manual

Quick Start Guide
FaceKiosk-H13A/C
Version: 2.0
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the
actual product and the written information in this manual.

1. Device Overview
Wall Mount Facekiosk-H13A
Speaker
RFID Card Reading Area
Near Infrared Fill Light
Fingerprint Scanner
13.3-inch High-definition Capacitive Touch Screen
Visible Light Camera
Near Infrared Camera
LED Fill Light
1

Ticket Printer
QR Code Scanner
LED Fill Light
Near Infrared Camera
Visible Light Camera
13.3-inch High-definition
CapacitiveTouch Screen
Speaker
Fingerprint Scanner
RFID Card Reading Area
Near Infrared Fill Light
2
Floor Mount Facekiosk-H13C

2. Facekiosk Installation
Wall Mount Installation Procedure
3
a
Before installation, connect the wire to the device and pass it through
the lower aperture of the device.
1Align the back plate with respect to the screw holes on the back of
the device.
2Secure the plate with the screws (11 pcs) to the back of the unit.
3Place the rear panel at the most appropriate height from the
ground. Drill the holes on the wall and fix the rear panel.

4
5
4
Set the device in an appropriate position on the rear panel that is
fixed on the wall.
Secure the Kiosk by assembling the device and the rear panel with
the bottom screws.

Floor Mount Installation Procedure
1
5
Take the device and the base from the box, and insert the device
into the corresponding slot of the base plate.
2Cautiously incline the device in a horizontal position and assemble
the device over the base with the screws (8 pcs) from the bottom of
the base.

3. Door Sensor, Exit Button & Alarm Connection
4. Access Control Device Connection
6

5. Quick Start
7
User Registration Management Verification View records
Registration
Device Registration:
Tap Menu > Staff Management> New Staff for new user registration.
Enter the mandator y registration details (ID, First name, Face
registration) and then tap Next to select the verification mode (face,
fingerprint, access card number (RFID card).

Set the IP address and the cloud service server address on the
device before registering into the software.
Biotime Software Registration:
1. If the device is set with server address and port number the
device will be automatically added to the software.
2. Click Personnel > Employee > Add to register users.
3. Click Device > Data Transfer >Sync Data to Deviceto
synchronize all data.
ZKBioSecurity Software Registration:
1. Click Attendance > Device > Search Device to add the device
tothe software.
If the device has set the server address and port, it can be added
automatically.
2. Click Personnel > Person > New to register users.
3. Click Attendance > Device >Device control> Synchronize All
Data to Devices.
For more details, please refer to the ZKBioSecurity User Manual or
BioTime User Manual.
Software Registration :
8

Wall Mount Face Kiosk-H13A
The recommended height of the device
camera from the ground is 155cm and the
recommended distance from the person to
the equipment is 50cm (applicable height
range 150cm-180cm). If the height is not
within this range, the front and rear positions
can be moved accordingly.
9
Mobile Phone Registration:
Scan the QR Code using the mobile phone and register the face.
aAdvised to set up or install the device terminal at the indoors
without sunlight interference.
bRecommended recognition distance:
Note: Only the super administrator is entitled to access the main menu
of the system.