ZKTeco ZKX Series User manual

X-Ray Inspection System User Manual
Page | 1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
For further details, please visit our Company’s website
www.zkteco.com.
User Manual
X-Ray Inspection System
Applicable models: ZKX series
Date: May 2020
Doc Version: 3.1
English

X-Ray Inspection System User Manual
Page | 1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Copyright © 2020 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be copied or
forwarded in any way or form. All parts of this manual belong to ZKTeco and its
subsidiaries (hereinafter the "Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this
manual are owned by their respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco
equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco
supplied equipment vests in and is the property of ZKTeco. The contents hereof should
not be used or shared by the receiver with any third party without express written
permission of ZKTeco.
The contents of this manual must be read as a whole before starting the operation and
maintenance of the supplied equipment. If any of the content(s) of the manual seems
unclear or incomplete, please contact ZKTeco before starting the operation and
maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the
operating and maintenance personnel are fully familiar with the design and that the said
personnel have received thorough training in operating and maintaining the
machine/unit/equipment. It is further essential for the safe operation of the
machine/unit/equipment that personnel has read, understood and followed the safety
instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract
specifications, drawings, instruction sheets or any other contract-related documents, the
contract conditions/documents shall prevail. The contract specific
conditions/documents shall apply in priority.

X-Ray Inspection System User Manual
Page | 2 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of
any information contained in this manual or any of the amendments made thereto.
ZKTeco does not extend the warranty of any kind, including, without limitation, any
warranty of design, merchantability or fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the information or
documents which are referenced by or linked to this manual. The entire risk as to the
results and performance obtained from using the information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental,
consequential, indirect, special, or exemplary damages, including, without limitation,
loss of business, loss of profits, business interruption, loss of business information or any
pecuniary loss, arising out of, in connection with, or relating to the use of the information
contained in or referenced by this manual, even if ZKTeco has been advised of the
possibility of such damages.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the information herein
which will be incorporated into new additions/amendments to the manual. ZKTeco
reserves the right to add, delete, amend or modify the information contained in the
manual from time to time in the form of circulars, letters, notes, etc. for better operation
and safety of the machine/unit/equipment. The said additions or amendments are
meant for improvement /better operations of the machine/unit/equipment and such
amendments shall not give any right to claim any compensation or damages under any
circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment
malfunctions due to any non-compliance of the instructions contained in this manual (ii)
in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of
operation of the machine and equipment in conditions different from the prescribed
conditions of the manual.
The product will be updated from time to time without prior notice. The latest operation
procedures and relevant documents are available on http://www.zkteco.com
If there is any issue related to the product, please contact us.

X-Ray Inspection System User Manual
Page | 3 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
ZKTeco Headquarters
Address ZKTeco Industrial Park, No. 26, 188 Industrial Road,
Tangxia Town, Dongguan, China.
Phone +86 769 - 82109991
Fax +86 755 - 89602394
For business related queries, please write to us at: [e-mail].
To know more about our global branches, visit www.zkteco.com.

X-Ray Inspection System User Manual
Page | 4 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
About the Company
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint,
Facial, Finger-vein) readers. Product offerings include Access Control readers and panels,
Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles,
License Plate Recognition (LPR) gate controllers and Consumer products including
battery-operated fingerprint and face-reader Door Locks. Our security solutions are
multi-lingual and localized in over 18 different languages. At the ZKTeco state-of-the-art
700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing,
product design, component assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and
development of biometric verification procedures and the productization of biometric
verification SDK, which was initially widely applied in PC security and identity
authentication fields. With the continuous enhancement of the development and plenty
of market applications, the team has gradually constructed an identity authentication
ecosystem and smart security ecosystem, which are based on biometric verification
techniques. With years of experience in the industrialization of biometric verifications,
ZKTeco was officially established in 2007 and now has been one of the globally leading
enterprises in the biometric verification industry owning various patents and being
selected as the National High-tech Enterprise for 6 consecutive years. Its products are
protected by intellectual property rights.
About the Manual
This manual introduces the operations of X-Ray Inspection System.
All figures displayed are for illustration purposes only. Figures in this manual may not be
exactly consistent with the actual products.

X-Ray Inspection System User Manual
Page | 5 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual are listed below:
GUI Conventions
For Software
Convention Description
Bold font Used to identify software interface names e.g. OK, Confirm, Cancel
>Multi-level menus are separated by these brackets. For example, File >
Create > Folder.
For Device
Convention Description
< > Button or key names for devices. For example, press <OK>
[ ]
Window names, menu items, data table, and field names are inside
square brackets. For example, pop up the [New User] window
/Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols
Convention Description
This implies about the notice or pays attention to, in the manual
The general information which helps in performing the
operations faster
The information which is significant
Care taken to avoid danger or mistakes
The statement or event that warns of something or that serves
as a cautionary example.

X-Ray Inspection System User Manual
Page | 6 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Table of Contents
1 IMPORTANT SAFETY PRECAUTIONS............................................................................9
SAFETY STANDARD OF IMAGING FILMS........................................................................................................................91.1
SAFETY CHECKS BEFORE POWER-ON ............................................................................................................................91.2
BASIC SAFETY RULES .....................................................................................................................................................91.3
RADIATION PROTECTION............................................................................................................................................101.4
2 PRODUCT INTRODUCTION .........................................................................................11
WORKING PRINCIPLE ..................................................................................................................................................112.1
PRODUCT TECHNICAL SPECIFICATIONS/BASIC PARAMETERS .................................................................................122.2
PRODUCT FEATURES...................................................................................................................................................152.3
APPLICATION AREAS...................................................................................................................................................152.4
3 EQUIPMENT OPERATION ............................................................................................16
POWER-ON ..................................................................................................................................................................163.1
ITEM INSPECTION ........................................................................................................................................................183.2
SHUT DOWN ...............................................................................................................................................................183.3
INDICATOR AND EMERGENCY STOP BUTTON ...........................................................................................................183.4
SPECIAL KEYBOARD ....................................................................................................................................................213.5
PC KEYBOARD AND MOUSE........................................................................................................................................243.6
4 IMAGE PROCESSING AND SOFTWARE OPERATION ..................................................26
MAIN INTERFACE.........................................................................................................................................................264.1
SYSTEM SOFTWARE.....................................................................................................................................................264.2
INFORMATION AREA ...................................................................................................................................................274.3
OPERATING FUNCTION AREA......................................................................................................................................284.4
IMAGE PROCESSING FUNCTION .................................................................................................................................294.5
4.5.1 BW/CL( BLACK&WHITE ⇔COLOR)....................................................................................................................... 29
4.5.2 HP (HIGH PENETRATE).............................................................................................................................................. 30
4.5.3 LP(LOW PENETRATE)................................................................................................................................................. 30
4.5.4 PV(PERFECT VIEW) ..................................................................................................................................................... 30
4.5.5 OM(ORGANIC MATERIAL)........................................................................................................................................ 31
4.5.6 IM(INORGANIC MATERIAL) ..................................................................................................................................... 31
4.5.7 IN(INVERSING)............................................................................................................................................................. 31
4.5.8 ADJUSTING BRIGHTNESS......................................................................................................................................... 32
4.5.9 DS(DYNAMIC SCAN).................................................................................................................................................. 32

X-Ray Inspection System User Manual
Page | 7 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4.5.10 PS(PSEUDO-COLOR DISPLAY) ............................................................................................................................. 32
4.5.11 SUSPICIOUS ORGANICS ENHANCING FEATURE OF Z789............................................................................ 32
SYSTEM OPTIONS........................................................................................................................................................334.6
IMAGE ..........................................................................................................................................................................334.7
4.7.1 IMAGE PREVIEW ......................................................................................................................................................... 33
4.7.2 IMAGE SETTING .......................................................................................................................................................... 35
USER MANAGEMENT ..................................................................................................................................................374.8
4.8.1 ACCOUNT SETTING ................................................................................................................................................... 38
4.8.2 CHANGE PASSWORD................................................................................................................................................ 39
4.8.3 AUTOMATIC LOGIN................................................................................................................................................... 40
LOG MANAGEMENT....................................................................................................................................................404.9
4.9.1 STARTUP LOG ............................................................................................................................................................. 40
4.9.2 SESSION LOG............................................................................................................................................................... 41
4.9.3 X-RAY RADIATION LOG............................................................................................................................................ 42
TIP(THREAT IMAGE PROJECTION)...........................................................................................................................424.10
4.10.1 TIP STRATEGY ........................................................................................................................................................... 44
4.10.2 TIP IMAGES ................................................................................................................................................................ 45
4.10.3 TIP EXAM QUERY ..................................................................................................................................................... 46
TRAINING...................................................................................................................................................................474.11
4.11.1 PARAMETERS SETTING........................................................................................................................................... 47
4.11.2 OPERATION PANEL ................................................................................................................................................. 47
4.11.3 TRAINING PROCEDURE.......................................................................................................................................... 48
SYSTEM SETTINGS.....................................................................................................................................................484.12
4.12.1 INTELLIGENT IDENTIFICATION ............................................................................................................................ 48
4.12.2 KEYBOARD................................................................................................................................................................. 49
4.12.3 COUNTER SETTING.................................................................................................................................................. 50
4.12.4 OTHERS....................................................................................................................................................................... 51
SYSTEM INFORMATION.............................................................................................................................................524.13
LOG OUT AND SHUTDOWN ......................................................................................................................................534.14
5 MAINTENANCE INSTRUCTIONS..................................................................................54
INSTALLATION ENVIRONMENT ...................................................................................................................................545.1
DAILY CLEANING.........................................................................................................................................................545.2
5.2.1 OUTER SURFACE OF THE EQUIPMENT ................................................................................................................ 54
5.2.2 INTERIOR OF THE EQUIPMENT............................................................................................................................... 55
5.2.3 DISPLAY, SLOT OF PHOTOELECTRIC SENSOR AND CONTROL CONSOLE................................................. 55
REGULAR INSPECTIONS...............................................................................................................................................565.3

X-Ray Inspection System User Manual
Page | 8 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
5.3.1 INSPECTION OF PHOTOELECTRIC SENSOR ........................................................................................................ 56
5.3.2 INSPECTION OF CONVEYOR ................................................................................................................................... 56
5.3.3 INSPECTION OF LEAD SHIELD AT THE ENTRANCE AND EXIT OF THE PASSAGE..................................... 57
5.3.4 INSPECTION OF X-RAY LIGHT INDICATOR AND POWER INDICATOR LIGHT ............................................ 57
5.3.5 INSPECTION OF EMERGENCY STOP BUTTON .................................................................................................... 57
STORAGE CONDITIONS AND NOTICE.........................................................................................................................575.4
TROUBLESHOOTING....................................................................................................................................................585.5

X-Ray Inspection System User Manual
Page | 9 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
1Important Safety Precautions
The X-Ray Inspection System works as per the safety regulations. To ensure the safety of
users, read this manual carefully before operating the system.
Safety Standard of Imaging films1.1
The imaging films used in our X-Ray Inspection System adheres to ISO1600 safety
standards.
Safety checks before Power-on1.2
Before the power is turned-on, make sure to carry out the following safety checks:
1. Check the lead film, do not operate the system if the film is broken or there is any
gap.
2. Check if the photoelectric sensor is blocked.
3. Check if the transmission belt is deviated or stuck; ensure that there is no spike or
filth.
4. Check if there are flaws on the Shell, Monitor, Console board and cable.
5. Ensure that the cover plate is properly installed.
Basic Safety Rules1.3
To ensure safe operation of the X-Ray Inspection system, follow the safety rules given
below:
1. The Operator must know the relevant radiation protection rules and all the safety
instruction rules.
2. If you had not used the system for more than 6 months, check carefully before
operating.
3. Only the professional technician is allowed to perform installation, circuit
connection and replacement of electrical components.

X-Ray Inspection System User Manual
Page | 10 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4. Do not operate the system if the Shell/Cable/Transmission belt is broken.
5. Only the professional technician can open the shell and inner parts.
6. Do not modify or change any safety settings.
7. No living thing shall be allowed to pass through the X-Ray Inspection system.
8. Do not dip any part of the body into the tunnel when the system is running.
9. Shut down the system immediately if any liquid flows into the system.
10. Make sure all the circuit connections and ground connections are proper.
Radiation Protection1.4
To ensure the safety of the operator and users, we have outlined a set of radiation
protection measures that includes:
1. Only when the Generator works on a high voltage, the machine will emit X-Ray.
So, the machine will not emit any radiation on transportation or normal usage.
2. Lead Boards are installed around the machine; Lead films are installed at the
entry and exit to prevent X-Ray from leaking into the environment.
3. The machine has an effective ground connection which prevents electric shocks
to the operator.
4. Overload Preventer, Overcurrent Preventer and Current leakage Preventer are
mounted inside the machine.
5. The machine also includes a safety-interlock; if it is switched off, the X-Ray
generator will not be activated.

X-Ray Inspection System User Manual
Page | 11 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
2Product Introduction
The X-Ray Inspection System offers a dependable and flexible intelligence security
solution. We have built a comprehensive security system to protect your entrance,
including People Inspection, Freight Inspection, and Vehicle Inspection. This chapter
illustrates the working principle, product technical specifications, basic parameters,
product features, and application areas.
Working Principle2.1
The X-Ray Inspection System has five modules: Item Transmission module, X-Ray
Generator & Control, Signal acquisition & Transmission module, Industrial motherboard
and Electric Control module.
The items enter the X-Ray inspection tunnel through the conveyor belt. A photo-electric
sensor is installed at the entry of the tunnel. When the items enter into the tunnel, the
sensor sends an inspection signal and the Control board commands the X-Ray Generator
to generate X-Ray. The X-Ray penetrate through the items and it is partially absorbed by
the items in the tunnel and the rest is absorbed by the X-Ray reciever. Then the reciever
converts the X-Ray signal into digital signal and then sends to the computer. With the
excellect image processing algorithm incorporated, a clear image of the items will be
displayed on the screen.
Figure2-1 System Operation Process

X-Ray Inspection System User Manual
Page | 12 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Figure2-2 Equipment Internal X-Ray Diagram
Product Technical Specifications/Basic Parameters2.2
Basic parameters of General series security inspection system
Model/Type
5030A 5030C 6040 6550 8065 10080 100100
Single
energy
Dual
energy
Dual
energy
Dual
energy
Dual
energy
Dual
energy
Dual
energy
Basic
parameters
Channel
size
Width
(mm)
507 507 608 660 805 1004 1008
Height
(mm)
305 305 405 510 660 806 1005
Maximum evenly
distributed
load(kg)
150 150 150 180 200 220 220
Tube current(mA) 0.4 to 0.8 0.6 to 1.0
Anode voltage
80KV 140KV to 160KV
Cooling method
Sealed oil cold/100%

X-Ray Inspection System User Manual
Page | 13 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Environmental
Parameters
Storage
temperature/
relative humidity
-40±2℃to +60±2℃/5% to 95%(Not condensed)
Operating
temperature/
relative humidity
0℃±2℃to +40±2℃/5% to 95%(Not condensed)
Main Power
Supply AC220V(-15% to +10%),50Hz±3Hz
Power loss
(maximum) ≤0.5KW
≤0.5KW ≤0.5KW ≤0.8KW ≤1.0KW ≤1.5KW ≤1.5KW
Noise level
≤55dB
Image
processing
system
Image Processing
Pseudocolor, gray color,
high penetration, low
penetration,
super enhancement, mineral strip, organic
strip, dynamic scan, inverse image, etc.
Storage capacity More than 100, 000 pictures
System functions
High density alert, drugs and explosives
inspection,
date/time display, baggage counting, user
management, TIP, training and other functions.
Basic parameters of General series security inspection system
Model/Type
6550D 8065D 10080D 100100D
Dual energy Dual energy Dual energy Dual energy
Basic
parameters
Channel
size
Width
(mm)
660 805 1004 1008
Height
(mm)
510 660 806 1005

X-Ray Inspection System User Manual
Page | 14 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Maximum evenly
distributed
load(kg)
180 200 220 220
Tube current(mA) 0.6 to 1.0
Anode voltage 140KV to 160KV
Cooling method Sealed oil cold/100%
Environmental
Parameters
Storage
temperature/
relative humidity
-40±2℃to +60±2℃/5% to 95%(Not condensed)
Operating
temperature/relati
ve humidity
0±2℃to +40±2℃/5% to 95%(Not condensed)
Main Power
Supply AC220V(-15% to +10%), 50Hz±3Hz
Power loss
(maximum) ≤1.0KW ≤1.3KW ≤1.6KW ≤1.6KW
Noise level ≤55dB
Image
processing
system
Image Processing
Gray color, high penetrate, low penetrate, super
enhancement, mineral strip, organic strip, dynamic scan,
inverse image, etc.
Storage capacity More than 100, 000 pictures.
System functions
High density alert, drugs and explosives inspection,
date/time display, baggage counting, user
management, TIP, training and other functions.

X-Ray Inspection System User Manual
Page | 15 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Product Features2.3
To ensure the users with a more secured, convenient and faster service, the inspection
system is equipped with the following features:
•Environmental protection: There is a protectitve film on the surface of the lead
shield to avoid touching and lead pollution.
•Secured assembly: The machine includes radiation emission control to avoid false
emissions.
•One key shutdown: Turn off the key switch, the device automatically shuts down
thus making it simple and convenient.
•Fault self-diagnosis: The system automatically identifies the failure and displays
the message. So, it is easy to maintain.
•Special keyboard: It processes the image, boot, shuts down the machine and so
on.
•Dynamic screen switching: Pictures can be switched between dynamic and static
modes.
Application Areas2.4
The X-Ray Inspection system adopts the latest image processing technology and high
display resolution. The image will be clearer with a great resolution. It can quickly and
effectively detect a variety of hazardous and high-density materials. It is suitable for
small-size packages such as small bags, suitcases, bags and so on. It is used in
Government sectors, Embassy's, Airports, Convention centers, Exhibition centers, Tourist
places, Post offices, Shopping malls, Hotels and so on.

X-Ray Inspection System User Manual
Page | 16 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
3Equipment Operation
Power-on3.1
Step 1: Plug the device power cable into the power outlet (make sure the power supply
and the ground connections are proper).
Figure3-1 ZKX5030
Figure3-2 ZKX6550

X-Ray Inspection System User Manual
Page | 17 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Step 2: Insert the key into the key slot and turn it on.
Figure3-3 Key slot in the ZKX5030
Figure3-4 Key slot in the control desk
Step 3: Press the Start button which is next to the key slot to start the system. The green
light will glow.
Step 4: Once powered-on, the pre-heating process runs automatically to protect the X-
Ray generator and it normally takes 1 to 5 mins. After preheating, the device starts to
scan.

X-Ray Inspection System User Manual
Page | 18 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Item Inspection3.2
Placing materials: The objects must be placed on the conveyor belt or the conveyor
roller as indicated on the entry as "INPUT BAGGAGE".
Item inspection: When an item goes into the tunnel, the monitor will display the
scanned image of the item. Different colors indicate different materials. The direction
keys on the console board or the software interface controls the moving direction of the
conveyor belt.
Step 1: Place the item at the tunnel entrance.
Step 2: Press the “Forward” button.
Step 3: When the item goes through the tunnel, the X-Ray indicator (red light) turns on.
Step 4: Finally remove the item after scanning.
Shut Down3.3
Step 1: Stop running the conveyor belt, turn the key to the “OFF” position. The indicator
on the right-side of the key slot will turn off and the green indicator will turn off after a
minute.
Step 2: Disconnect the device from the external power supply. Take out the key from the
key slot.
Indicator and Emergency Stop Button3.4
Emergency stop button: If there is any emergency, press the Emergency stop button to
stop the X-Ray emission and conveyor belt.

X-Ray Inspection System User Manual
Page | 19 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Figure3-5 Restore operation
Notice: If you need to restore the normal state of the device (cancel the emergency stop
state), please rotate the pressed emergency stop button clockwise, pop it out, and then
press the start button to resume.
Figure3-6 Restore operation
Note: Press the Start button to restore the operation.