Zonair3D PURE AIRBOX User manual

USER MANUAL
MANUAL DE USUARIO
用户手册
PURE AIRBOX
PUREPURE
AIRBAIRB
OXOX


Zonair3d is a Spanish company
operating on all ve continents that is
engaged in the research and scientic
development of air purication systems.
In collaboration with a number of
scientic institutions and research
centres, Zonair3D works on the
development of solutions that offer
answers to unresolved needs in such
areas as health, wellbeing or buildings,
among others.
PURE AIRBOX
This pioneering product is our response
to current environmental pollution and
our concerns over the constant and
ever-increasing deterioration of the
quality of the air we breathe.
Pure Airbox is an air purication
equipment specially designed for
indoor spaces. Its unique system lters
and puries polluted air, transforming
it into the best quality air, free from
contaminating particulate, free from
environmental ozone, and with toxic,
irritating and carcinogenic gaseous
pollutants reduced to levels of
comfort.
Pure air is essential for the
respiratory system to work properly,
it is an important factor in anti-aging
treatments, it enhances respiratory
pathway recovery following physical
exercise and it is of fundamental
importance to the existence of life


CONTENTS
6 GETTING STARTED
8 TECHNICAL SPECIFICATIONS
9 START-UP
10 CARE AND MAINTENANCE
12 FAQ’s
Welcome
Thank you for choosing Zonair3d and congratulations on your purchase of Pure
Airbox. Please take a few minutes to read this manual before starting to use your
Zonair3d equipment in order to familiarise yourself with its operation.

Getting started
GENERAL SAFETY INSTRUCTIONS
Pure Airbox is a portable air purication equipment with tested ltration eciency.
It has three ltering stages: F7 pre lter, H14 absolute Hepa lter and the unique
GRSystem by Zonair3d for gas removal. This equipment includes electrical
components. It is therefore important that you carefully read the following safety
instructions before use.
·This equipment should not be used by people with reduced physical or mental
abilities without assistance or supervision.
·It is not a toy. Children should not use this equipment unless supervised by
an adult.
·Do not block the Pure Airbox air intake nor the air outlet from the Pure Airbox.
·Do not spill water or other liquids on the equipment.
·Do not switch on the equipment if any of the electrical components is damaged
or not operating correctly.
· If the power cord is damaged or broken, it can be replaced by a male/female
power cord such as those used for computers or similar equipment.
·Remember to switch off the equipment before unplugging it from the power
socket.
·Do not operate inside the unit, unless for lter replacement (refer to Maintenance
instructions). Any other operation must be carried out by personnel authorised by
ZONAIR3D.
·Before disassembling any panel, check that the unit is not switched to the electric
power network.
· Only use lters supplied by ZONAIR3D.
Positioning
· Position the equipment in a large, ventilated space.
·Do not position the equipment on a soft surface.
Always position the equipment on a at, stable surface.
·Do not position the equipment close to explosives.
· Do not position the equipment close to heat sources, such as radiators,
replaces or ovens.
· Do not position the equipment in areas close to water sources, such as
bathrooms or laundries.
· Do not position the equipment outside unprotected.

7Pure Airbox
UNPACKING
You will nd the following items inside the box:
·1 Pure Airbox
·Torx T-25 key for lter maintenance
·User Manual
You will nd your GRSystem Filter appart:
·1Electrical power cord
·1 GRSystem | Zonair3d
MANUAL
PURE AIRBOX

Technical specications
TECHNICAL SPECIFICATIONS PURE AIRBOX
VOLTAGE 230 V ± 15% 50/60 Hz
MAXIMUM ABSORBED CURRENT 1.1 A
FAN SPEED 2900 rpm
WEIGHT 50 Kg aprox
FILTERING STAGES
· F7 Pre lter
· H14 Absolute lter
· GRSystem | ZONAIR3D lter, gas reduction system
MAXIMUM ABSORBED POWER 178 W (EC engine)
MAXIMUM FLOW 660 m3/h
SIZES 735 mm (L) x 550 mm (W) x 603 mm (H)
ACOUSTIC PRESSURE LEVEL (*)
INTERNAL SILENCER
49 dB (A) maximum ow
Yes
IP CLASSIFICATION IP54
OPTIONAL (ON DEMAND)
· Transformer (110 V – 220 V and 60 Hz - 50 Hz)
· Special connector according to the destination Country
(UK, US…)
* Acoustic pressure level at 3 m distance.

9Pure Airbox
Start-up
CONNECTION OF PURE AIRBOX
Before connecting the equipment, check that no component is missing.
SWITCHING OFF PURE AIRBOX
After use, switch the Pure Airbox regulator to off and disconnect from the power
supply.
Position the equipment in a clean and dry space.
1. Before connection, place the
GRSystem lter inside the Pure
Airbox.
The lter is packed separately.
(Follow the instructions provided
with the lter or pages 10 & 11 of
this manual).
2. Locate a power supply for
connection to the Pure Airbox. 3. Plug the equipment to the
power supply using the power
cord of the Pure Airbox and
switch on the equipment by
pressing the blue switch.
4. Position the regulator to
position 5 to check its normal
operation.
5. Once having checked that it
is operating properly, position
the regulator to its maximum
speed for ten minutes for a deep
cleaning of the room.
6. Then, position the regulator
between position 3 and 4 for an
optimal ventilation and comfort
speed.

Care and maintenance
Pure Airbox is a unique product that uses a high-quality design and materials.
Please read the following instructions for keeping your equipment in the best
possible condition:
CLEANING AND MAINTENANCE
·Unplug the equipment from the power supply before cleaning or performing
its maintenance.
·Use a wet cloth for general cleaning.
·Do not use solvents nor abrasive materials that could damage its surface.
· The fan of the Pure Airbox does not require maintenance.
·Do not try to repair or adjust any mechanical part of the equipment.
REPLACEMENT OF FILTERS
Pure Airbox is supplied with the pre-lter and absolute lter installed. The
GRSystem lter is packed separetely and should be installed.
They are easy to replace.
For optimum operation of the equipment under normal conditions, Zonair3d
recommends the following lter replacement plan:
Before disassembling any panel, check that the unit is not switched to the electric
power network.
IMPORTANT: Use a mask to replace the lters. It is also recommended to use gloves
and glases to avoid any contact with adsorbed substances.
FILTER REPLACEMENT
Pre-lter (F7)
Absolute lter H14
GRSystem | Zonair3d
Every year
Every 4 years
Every 2 years

11 Pure Airbox
In the event of high pollutant concentrations, lters may become clogged faster and
require a different lter replacement plan.
Contact Zonair3d or your local distributor for replacements.
IMPORTANT: It is important that only original lters supplied by Zonair3d are used to
ensure the desired result and correct operation of the equipment. The guarantee will
become void if lters other than those supplied by Zonair3d are used.
MANAGEMENT OF USED FILTERS
Contact your local waste manager regarding the correct disposal of used lters.
1
3
5
2
4
6

FAQs
Should I unplug Pure Airbox when not in use?
We recommend unplugging Pure Airbox when not in use so as to fully disconnect
it from any power source and thus protect it against any possible electrical fault
caused by external factors.
How long can the motor be left running?
As long as you like. Pure Airbox consumes 178w at full power.
Does Pure Airbox have any contraindications or side effects?
It has no contraindications or side-effects and it improves quality of life for
those who use it. Pure air is absolutely harmless.
Is it counter-productive to breathe pure air and then go back outside into a
situation of environmental pollution?
No; the longer you breathe pure air, the greater the benets. Breathing pure air
for as long as you like enables you to better deal with the environment.



TECHNICAL SUPPORT AND REPAIRS
For technical issues or any support needed,
please contact your local distributor (visit
website www.zonair3d.com)
or email Zonair3d Technical Support at:
You may also visit our website
http://www.zonair3d.com
where you will nd general most frequently
asked questions (FAQs).


Zonair3d es una empresa española
con presencia en los 5 continentes
centrada en el desarrollo de sistemas de
puricación del aire.
En colaboración con instituciones y
centros de investigación cientíca,
Zonair3d desarrolla sistemas de
puricación del aire para dar respuesta
a necesidades latentes en áreas como la
salud, el bienestar o la edicación, entre
otras.
PURE AIRBOX
Este pionero producto nace fruto de
la preocupación por la contaminación
ambiental actual, debido al continuo
y creciente deterioro de la calidad del
aire que respiramos.
Pure Airbox es un equipo portátil de
puricación de aire adaptado para ser
utilizado en espacios interiores. Su
exclusivo sistema ltra y purica el
aire contaminado, transformándolo
en un aire de calidad óptima, libre de
partículas contaminantes, de ozono
ambiental y con reducción de gases
tóxicos, irritantes y cancerígenos a
niveles de confort.
El aire puro es esencial para el
buen funcionamiento del sistema
respiratorio, es un factor importante
en los tratamientos antienvejecimiento,
favorece la regeneración de las vías
respiratorias después del ejercicio físico
y es un bien imprescindible para la vida.


ÍNDICE
6 PARA EMPEZAR
8 ESPECIFICACIONES TÉCNICAS
9 PUESTA EN MARCHA
10 CUIDADO Y MANTENIMIENTO
12 FAQ’s
Bienvenida
Gracias por haber elegido a Zonair3d y felicidades por haber adquirido Pure Airbox.
Por favor, tómese unos minutos para leer este manual antes de empezar a utilizar
su equipo Zonair3d, para familiarizarse con su funcionamiento.

Para Empezar
INSTRUCCIONES GENERALES DE SEGURIDAD
Pure Airbox es un equipo de puricación de aire portátil con un sistema de ltraje
de eciencia probada que consta de tres etapas: Pre-Filtro F7, ltro absoluto H14
y el exclusivo ltro GRSystem by Zonair3d para la eliminación de gases. Lleva
equipamiento eléctrico. Por ello, es importante leer atentamente las siguientes
instrucciones de seguridad antes de su uso.
·Este equipo no debe ser utilizado por personas con capacidad física o mental
reducida, sin ayuda o supervisión.
·No es un juguete. Los niños no deberán utilizarlo sin la supervisión de un adulto.
·No obstaculizar ni la entrada ni la salida de aire del Pure Airbox.
·No verter agua ni otros líquidos sobre el equipo.
·No poner el equipo en marcha si alguno de los componentes eléctricos estuviera
dañado o si no funcionara correctamente.
· Si el cable eléctrico estuviera roto o dañado, puede sustituirse por un cable de
alimentación macho-hembra, como el de un ordenador o aparato similar.
·Recuerde desconectar el equipo antes de desenchufarlo de la toma de corriente
eléctrica.
·No manipular el interior del equipo, salvo para la sustitución de ltros (ver
instrucciones de mantenimiento). Cualquier otra manipulación deberá ser realizada
por personal autorizado por ZONAIR3D.
·Antes de desmontar cualquier panel, asegurarse de que el equipo no se encuentre
conectado a la red eléctrica.
· No utilizar ltros que no hayan sido suministrados por ZONAIR3D.
Colocación
· Coloque el equipo en un espacio amplio con circulación de aire.
· No colocar el equipo en una supercie blanda. Situarlo siempre en una
supercie plana y estable.
·No colocar el equipo cerca de explosivos.
· No colocar el equipo cerca de fuentes de calor, como radiadores,
chimeneas u hornos.
· No colocar el equipo en zonas húmedas, como en baños o lavanderías.
· No colocar el equipo a la interperie, sin protección.
Table of contents
Languages:
Other Zonair3D Air Cleaner manuals

Zonair3D
Zonair3D Pure Airbox Home 500 S User manual

Zonair3D
Zonair3D DAITSU Pure Airbox Home S User manual

Zonair3D
Zonair3D AIR MOVE+ User manual

Zonair3D
Zonair3D AIR PRO 2000 User manual

Zonair3D
Zonair3D BUBBLE | PURE AIR User manual

Zonair3D
Zonair3D AIR+ 300 S User manual

Zonair3D
Zonair3D AIR+ 600i Instruction manual

Zonair3D
Zonair3D AIR+ 600 User manual

Zonair3D
Zonair3D PURE AIR RESIDENTIAL 100 User manual

Zonair3D
Zonair3D PURE AIR CONTROL 500V Manual