zortrax Z-Axis User manual

Z-Axis Cover Replacement
SOURCE:
https://support.zortrax.com/z-axis-cover-replacement/

Table Of Content
Unplugging the Power Cable 3
Unplugging the Heatbed Cable (from the Z-Axis Cover) 4
Platform Removal 5
Unscrewing the Z-Axis Cover, part 1 6
Unscrewing the Z-Axis Cover, part 2 7
Z-Axis Cover Removal 8
Z-Axis Cover Installation 9
Securing the Z-Axis Cover, part 1 10
Securing the Z-Axis Cover, part 2 11
Platform Installation 12
Plugging the Heatbed Cable (into the Z-Axis Cover) 13
Plugging the Power Cable 14

Unplugging the Power Cable
Turn off the printer and unplug the power cable.

Unplugging the Heatbed Cable (from the Z-Axis
Cover)
Unplug the heatbed cable from the Z-axis cover.

Platform Removal
Remove the platform with the heatbed cable from the printer.

Unscrewing the Z-Axis Cover, part 1
Unscrew the screw that secures one part of the Z-axis cover inside the printer.

Unscrewing the Z-Axis Cover, part 2
Unscrew the screw that secures one part of the Z-axis cover at the back of the printer.

Z-Axis Cover Removal
Remove the Z-axis cover from the printer.

Z-Axis Cover Installation
Install the Z-axis cover back in the printer.

Securing the Z-Axis Cover, part 1
Secure the cover by fixing the screw at the back of the printer.

Securing the Z-Axis Cover, part 2
Secure the cover by fixing the other screw inside the printer.

Platform Installation
Place the heatbed cable behind the heatbed mount and install the platform back in the
printer.

Plugging the Heatbed Cable (into the Z-Axis
Cover)
Plug the heatbed cable into the Z-axis cover.

Plugging the Power Cable
Plug the power cable in.
Powered by TCPDF (www.tcpdf.org)