2N LTE Verso Instruction sheet



2N® LTE Verso Configuration
Manual

v.2.37
www.2n.com






2N® LTE Verso Configuration Manual
2 / 224
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Content:
1. Product Overview
2. Express Wizard for Basic Settings
3. Model Differences and Function Licensing
3.1 Function Licensing
4. Signalling of Operational Statuses
5. Intercom Configuration
5.1 Status
5.2 Directory
5.2.1 Users
5.2.1.1 User Fingerprint Setting Instructions
5.2.1.2 USB RFID Card Reader
5.2.2 Time Profiles
5.2.3 Holidays
5.3 Hardware
5.3.1 Switches
5.3.2 Audio
5.3.3 Camera
5.3.4 Buttons
5.3.5 Backlight
5.3.6 Display
5.3.7 Digital Inputs
5.3.8 Extenders
5.4 Services
5.4.10 SNMP
5.4.1 Phone
5.4.1.1 Dial Cycles Limit
5.4.2 Access Control
5.4.3 Streaming
5.4.4 E-Mail
5.4.5 Automation
5.4.6 HTTP API
5.4.7 User Sounds
5.4.8 Web Server
5.4.9 Audio Test
5.6 Used Ports
5.5 System
5.5.1 Network
5.5.2 Date and Time
5.5.3 Licence
5.5.4 Certificates
5.5.5 Auto Provisioning
5.5.6 Syslog

2N® LTE Verso Configuration Manual
3 / 224
•
•
•
•
•
5.5.7 Maintenance
6. Supplementary Information
6.1 Troubleshooting
6.2 Directives, Laws and Regulations
6.3 General Instructions and Cautions

2N® LTE Verso Configuration Manual
4 / 224
1. Product Overview
The2NLTE door intercomsarea successful substitute for classic Speakerphone bell button
panels and complex circuitry of bells and domestic phones where structured cabling cannot be
deployed. The intercoms render more sophisticated and extensive services than standard
domestic phones. The intercom is easy to install - all you have to do is insert a SIM card, connect
a power supply and set necessary parameters via the My2N portal.
Thanks to the integrated SIP protocol, the intercom can make use of all VoIP services: call
forwarding at absence (to another office, VoiceMail or a cellular phone) or call transfer (from the
secretary’s office to the required person, e.g.).
The intercoms are equipped with a programmable number of quick dial buttons for speed
calling to the users whose numbers are included in the intercom Users list. Each of the quick dial
buttons can be assigned up to three phone numbers, which can be dialled in parallel or
sequentially. Thanks to an integrated time sheet it is possible to configure each of the buttons in
such a way that the called party is always accessible and/or calls to selected phone numbers can
be barred off the working hours.
Some2N LTEintercommodels are equipped with a numeric keypad, which can be used as a
code.
The2N LTEintercoms can be equipped with an RFID card reader for authorised access control
and thus become a key part of your surveillance or attendance control systems.
The2N LTEintercomsare equipped with a relay switch (and, optionally, other relays and
outputs), which controls the electric lock or other equipment connected to the intercom. Its
activation time and method can be programmed flexibly: it can be activated by a code,
automatically by a call, by pressing a button, and so on.It is always recommended that the
2N®Security Relay (Part No. 9159010) is used for increased security.

2N® LTE Verso Configuration Manual
5 / 224
The following symbols and pictograms are used in the manual:
•
Safety
Always abide by this information to prevent persons from injury.

•
Warning
Always abide by this information to prevent damage to the device.

•
Caution
Important informationfor system functionality.

•
Tip
Useful informationfor quick and efficient functionality.

•
Note
Routines or advice for efficient use of the device.


2N® LTE Verso Configuration Manual
6 / 224
2. Express Wizard for Basic Settings
Device Setting
Make sure that your device is properly installed and connected to My2N before logging in to the
intercom configuration interface. Log in to My2N athttps://my2n.comand add your intercom to
the 2N®Remote Configuration. You have to enter your My2N security code during login - find
the code in the card provided in the intercom package. Get access to the intercom web
configuration interface via the 2N®Remote Configuration.
Use the nameadminand password2n(i.e. default reset password) for your first login to the
configuration interface.
We recommend you to change the default password upon your first login.
The intercom requires a password change upon the first login. Strong passwords are only
accepted: eight characters at least including one capital letter, one small letter and one digit.
Remember the new password well or put it down just in case. Because if you forget the
password, you will have to reset the intercom to default values (refer to the Installation Manual
of your intercom model) and lose all your current configuration changes.
Firmware Update
We also recommend you to update your intercom firmware upon the first login to the intercom.
Refer towww.2n.czfor the latest firmware version. Press theUpdate Firmwarebutton in
theSystem/Maintenancemenu to upload firmware. The intercom will get restarted upon
upload and only then the updating process will be complete. The process takes about 30
seconds.
SIP Server Connection Setting
The intercom is automatically configured for making calls via the My2N 2N®Mobile Video service.
To use another VoIP infrastructure, set the necessary parameters in the Services/Phone
/SIPmenu.

2N® LTE Verso Configuration Manual
7 / 224
•
•
•
•
•
•
Display name– set the name to be displayed as CLIP on the called party's phone, in the
login window and on the web interface start page.
Phone number (ID)– set the intercom phone number (or another unique ID composed of
characters and digits) to identify the intercom uniquely in calls and registration.
Domain– set the domain name of the service with which the intercom is registered.
Typically, it is equivalent to the SIP Proxy or Registrar address. If you do not use a SIP
Proxy in your intercom installation, enter the intercom IP address.
If you use a SIP server (Proxy, Registrar), set the addresses for the following network elements:
Proxy address– set the SIP Proxy IP address or domain name.
Registrar address– set the SIP Registrar IP address or domain name. The SIP Proxy and
SIP Registrar addresses are usually identical.
Registration enabled– enable intercom registration with the set SIP Registrar.
If your SIP server requires authentication of terminal equipment, enter the following
parameters:

2N® LTE Verso Configuration Manual
8 / 224
•Password– enter the password for intercom authentication.
Quick Dial Button Settings
All the2N LTEintercom models are equipped with quick dial buttons. If you press a quick dial
button, a call will be set up to the phone number assigned to the respective Users listposition.
In theHardware/Buttonsmenu is displayed the list of all potentially available intercom
buttons including those physically absent. In some intercom models, the button list is divided
into 8/5-item groups corresponding to the button extending modules.Click ,select the user
and press Add to add a user to the editing field. To search a user in the list, use the fulltext field
and the username. One quick dial button can be shared by multiple users.

2N® LTE Verso Configuration Manual
9 / 224
You can also use the2N LTEintercom with one or more IP phones without a SIP server. Use
theDirect SIP Callfor outgoing calls and enter the called phone SIP
address(sip:phone_number@phone_ip_address)instead of the phone number.

2N® LTE Verso Configuration Manual
10 / 224
Electric Lock Switching Settings
An electric lock can be attached to the2N LTEintercoms and controlled by a code from the
intercom numeric keypad, or a code from the IP phone keypad during a call. Connect the electric
lock as instructed in the Installation Manual of your intercom model.
Enable the switch in theSwitch Enabledparameter in theHardware/Switches/Switch 1tab,
set theControlled Outputto the intercom output to which the electric door lock is connected.
Now set one or more activation codes for the electric door lock switching.