ABB Welcome M2306 User manual

VER:1.0 │ │ 20.10.2015
ABB-Welcome
Pos: 2/Di nA4 - Anleitung enO nline/Inhalt/KNX/D oorEntry/832 20-AP-xxx/Tit elblatt - 83220-AP-xxx - ABB @ 19\mod_1 323249806476_15. docx@ 11 1084@ @ 1
Lift control module
M2306
M2307
=== Ende der List ef ür Textmar keCo ver ===

ABB-Welcome
|
—2 —
Pos: 4 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Inhalts verzeichnis (--> Für alleD okument e<--) /Inhaltsverzeichnis @ 19\ mod_132064904438 6_15.docx @ 109653 @ @ 1
1Safety............................................................................................................3
2Environment ..................................................................................................3
2.1 ABB devices.................................................................................3
3Technical data...............................................................................................4
4Function.........................................................................................................5
5Connection ....................................................................................................6
5.1 M2306...........................................................................................6
5.2 M2307...........................................................................................7
6Mounting / Installation..................................................................................10
6.1 Requirements for the electrician.................................................10
6.2 Mounting.....................................................................................12
7User case ....................................................................................................13
7.1 One M2306 and M2307..............................................................13
7.2 One M2306 and M2307..............................................................15
7.3 Up to two lifts per building...........................................................17
7.4 Up to four lifts per building..........................................................18
8Operation.....................................................................................................19
8.1 User Scenario Illustration of visitor
target floor ..................................................................................19
8.2 User Scenario Illustration of resident
target floor ..................................................................................20
9Configuration through the PC software........................................................21
9.1 Connected to PC ........................................................................21
9.2 Configuration..............................................................................22
=== Ende der Liste fürT extmarke TOC ===

ABB-Welcome
Pos: 6 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokumen tation/Überschrifte n( --> Für alle Dokum ente <--)/1. Ebene/S - T/Sicherheit @ 18\mod _1302612791790_1 5.docx @ 103357@ 1 @ 1
1 Safety
Pos: 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Dokum entation/Sicherheit (--> Für alle Doku mente< --)/Warnhin weise/Sicherheit - 230 V @ 18\mod_1302606 816750_15.docx @ 103308 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Work on the 100-240V supply system may only be performed by
authorised electricians!
–Disconnect the mains power supply prior to installation and/or
disassembly!
Pos: 10 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/U -Z/U mwelt @ 18\mod_1302 614158967_15.docx @ 10 3383@ 1 @ 1
2 Environment
Pos: 11 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--)/Hi nweise/Hin weis- U mwelt- Hinweis Ele ktrogeräte@ 18\m od_130276397343 4_15.docx @ 103500 @ @1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
domestic waste.
–The device contains valuable raw materials which can be recycled.
Therefore, dispose of the device at the appropriate collecting
depot.
Pos: 12 /DinA4 - Anleitunge n Online/Ueberschrif ten/2./ABB Gera ete@ 1 9\mod_132 3162843832_15.doc x@ 1 10875 @ 2 @ 1
2.1 ABB devices
Pos: 13 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--)/Hi nweise/Hin weis- U mwelt- ABB Ele ktrogeräte@ 19\m od_1323162745839_1 5.docx @ 110867 @ @1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via the authorized collecting depots and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB-Welcome
3 Technical data
Pos: 14 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Te chnische Daten/Di mmer/Technisc heD aten - 6591 U-101 @ 23 \mod_133308908 5280_15.docx @ 2070 39@ @ 1
General
Single-wire
clamps
2 x 0.28 mm–2 x 0.75 mm;
Fine-wire clamps
2 x 0.28 mm –2 x 0,75 mm;
Bus voltage
20 V DC –30 V DC
Size
4 TE
Protection
IP20
Operating
temperature
-25 °C –+55 °C
Size
M2306: 90 x 72 x 65 mm
M2307: 216 x 110 x 45 mm

ABB-Welcome
Pos: 15 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1
4 Function
Pos: 22 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /2. Ebene/G- L/Lastarten @ 20\mod_1326269 704379_15.docx @ 136905 @ 2 @ 1
The lift control modules include the M adaptor(M2306) and lift control relay module(M2307),these
two devices together make the control ofthe lift only to authorized floor possible.
In case the resident presses the "unlock" buttonwhen receiving the guest's call from outdoor station,
or the authorized user swipes theregistered card or enters the correct password ,the lift will go down
automatically to the floor where installs the outdoor station. Then the lift will go to the dedicated floor
where this resident lives, the lift cannot go to other floors even pressing the other floors' button in the
lift.
The configuration should be done through the dedicated configuration software by connecting the M
adaptor with PC/Laptop.

ABB-Welcome
Pos: 30 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Anschluss @ 19\mod_1 309248278435_15.doc x@ 1 07413@ 1 @ 1
5 Connection
5.1 M2306
Pos: 31 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/A nschluss/Dim mer/Anschluss - 6591 U-1 01@ 2 3\mod_1333093 920008_15.doc x@ 207 132 @ @ 1
Fig.
1
No.
Function
1
Status
- ON = Connected with the system controller / internal bus
- OFF = No connected with the system controller / internal bus
- Blinking = Working with the system controller / internal bus
2
- ON = Power on
- OFF = Power off
- Blinking = Working
3
Connect with M2307
4
Power Supply
5
Connect with the system controller / internal bus

ABB-Welcome
5.2 M2307
5.2.1
Pos: 31 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/A nschluss/Dim mer/Anschluss - 6591 U-1 01@ 2 3\mod_1333093 920008_15.doc x@ 207 132 @ @ 1
Fig.
2
No.
Function
1
Power LED
- ON = Power on
- OFF = Power off
2
Setting LED
- Blinks when working normally
3
Address
Set the module address
The address range is 1--16, only the left 4 bits are used
4
Power Supply
5
Connect with M2306
6
Connect with the lift controller

ABB-Welcome
Pos: 24 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenum bruch++ +++++++ +++ @ 9\mod _1268898668 093_0.docx @ 5 2149 @ @ 1

ABB-Welcome
5.2.2 Lift control relay module address by binary setting
Fig.
3

ABB-Welcome
6 Mounting / Installation
Pos: 34 /Busc h-Jaeger ( Neustru ktur)/Modul-Stru ktur/Online-D okumentati on/Sicherheit ( --> Füralle Do kumente <--)/Warnhinw eise/Sicherheit - Nied erspannungs- un d 230 V-Leitungen @ 18\ mod_1302617821 491_15.docx @ 10346 5@ @ 1
Warning
Electric voltage!
Risk of death and fire due to electric voltage of 230 V.
–Low-voltage and 230 V cables must not be installed together in a
flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the
low-voltage line.
Pos: 35 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokum ente <--)/Warnhinweis e/Sicherheit - Vorg eschaltete Sicherung absch alten @ 20\mod_ 1326441711467 _15.docx @ 137043 @ @ 1
Warning
Electric voltage!
The upstream fuse must be disconnected when working on the lighting
system.
Pos: 36 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sicherh eit- Fac hkenntnisse @ 18\mod_130 2774384017_15.doc x@ 1 03564 @ 2@ 1
6.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
•Incorrect installation endangers your life and that of the user of the
electrical system.
•Incorrect installation can cause serious damage to property, e.g. due
to fire.
The minimum necessary expert knowledge and requirements for the
installation are as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect the power;
2. Secure against being reconnected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.

ABB-Welcome
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type of supply network (TN system, IT system, TT system)
to secure the following power supply conditions (classic connection
to ground, protective earthing, necessary additional measures, etc.).

ABB-Welcome
6.2 Mounting
Pos: 38 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/M ontage/alle Geräte/Montage - UP-Dosen -D IN 49073-1 oder geeign etes Aufputzgehaeuse - Ohne Doc variable @ 20\mod_1325766 034453_15.docx @ 136593 @ @1
The device must only be installed on mounting rails according to DIN EN 50022.
M2306 is highly recommended to install in the lift motor room on the top floor or the
electrical riser; while M2307 is highly recommended to install in the lift cabin.
Fig.
4
Fig.
5
: Dismantle

ABB-Welcome
7 User case
7.1 One M2306 and M2307
High building <=16 floors with one Lift
Pos: 41 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/I nbetriebnahme/Di mmer/Inbetrieb nahme - 6591 U-101 @ 19\ mod_13119487 81023_15.docx @ 108 300 @ 222 @ 1
Fig.
6
: Topology
Adaptor

ABB-Welcome
Wiring by one M2306 and M2307
Fig.
7

ABB-Welcome
7.2 One M2306 and M2307
High building >16 floors with one Lift
Fig.
8
: Topology
Adaptor

ABB-Welcome
Fig.
9
Remarks:
1.The first mini system controller(M2301) feeds M2306 and 1 M2307.
2. Any one more additionalM2307 should be locally powered by 1 mini system controller. Eg.
4 M2307 + 1 M2306, totally, 4 mini system controllers are needed.

ABB-Welcome
7.3 Up to two lifts per building
High building >16 floors
Fig.
10
: Topology
Remark: The address code can not be repeated.
Adaptor

ABB-Welcome
7.4 Up to four lifts per building
High building >16 floors
Fig.
11
: Topology
Pos: 42 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-
Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @
9\mod_1268898668093_0.docx @ 52149 @ @ 1
Remark: The address code can not be repeated.
Adaptor
Adaptor

ABB-Welcome
Pos: 43 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Bedienung @ 11\mod_12 79185541649_15.d ocx@ 8 3043@ 1 @ 1
8 Operation
Pos: 44 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/B edienung/Di mmer/Bedienung - 65 91U- 101 @ 23\mod_13 33091293158_15.d ocx @ 207069 @ @ 1
8.1 User Scenario Illustration of visitor target floor
Fig.
12
Pos: 42 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1

ABB-Welcome
Pos: 43 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Übersc hriften (--> Für alleD okumente <--)/1. Ebene/ A- F/B edienung @ 11\mod_12791 85541649_15.doc x@ 83043 @ 1 @ 1
Pos: 44 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/B edienung/Di mmer/Bedienung - 65 91U- 101 @ 23\mod_13 33091293158_15.d ocx @ 207069 @ @ 1
8.2 User Scenario Illustration of resident target floor
Fig.
13
Remarks: The lift control module will not function when pressing the unlock button without a
call from building outdoor station. Eg. Unlock when there is a villa/floor outdoor station or
gate station