ABB M22411-W User manual

2TMD042000D0050 │09.06.2021
Product manual
ABB-Welcome
M2241.-W Video Indoor Station 7

Table of contents
Product manual
2TMD042000D0050
│
2
Table of c ontents
1Notes on the instruction manual............................................................................................................4
2Safety..................................................................................................................................................4
3Intended use........................................................................................................................................4
4Environment.........................................................................................................................................5
4.1 ABB devices..............................................................................................................................5
5Product description...............................................................................................................................6
5.1 Device type ...............................................................................................................................6
5.2 Control elements........................................................................................................................7
5.3 Terminal description...................................................................................................................9
6Technical data....................................................................................................................................10
7Mounting/Installation...........................................................................................................................11
7.1 Requirement for the electrician.................................................................................................11
7.2 General installation instructions................................................................................................12
7.3 Mounting.................................................................................................................................13
7.3.1 Installation height.................................................................................................................. 13
7.3.2 Surface-mounted installation................................................................................................. 13
7.3.3 Dismantling.......................................................................................................................... 14
8Commissioning...................................................................................................................................15
8.1 Operating instructions..............................................................................................................15
8.2 Initial setup..............................................................................................................................16
9Operation...........................................................................................................................................21
9.1 Incoming call ...........................................................................................................................21
9.1.1 Incoming call from outdoor station......................................................................................... 21
9.1.2 Incoming call from indoor station/guard unit........................................................................... 25
9.2 Surveillance.............................................................................................................................27
9.3 Intercom..................................................................................................................................29
9.4 Program button........................................................................................................................30
9.5 History.....................................................................................................................................31
9.5.1 Accessing the "History" screen.............................................................................................. 31
9.5.2 Displaying history records..................................................................................................... 32
9.5.3 Removing history records...................................................................................................... 34
10 Setting ...............................................................................................................................................36
10.1 Camera list..............................................................................................................................36
10.1.1 Accessing the "Camera list" screen....................................................................................... 36
10.1.2 Creating a camera list........................................................................................................... 37
10.1.3 Renaming the camera........................................................................................................... 38
10.1.4 Previewing the camera ......................................................................................................... 40
10.1.5 Visual doorbell setting........................................................................................................... 42
10.1.6 Removing the camera........................................................................................................... 45
10.2 Program button settings...........................................................................................................47

Table of contents
Product manual
2TMD042000D0050
│
3
10.2.1 Accessing the "Program button" screen................................................................................. 47
10.2.2 Adding a program function.................................................................................................... 48
10.2.3 Testing the program function................................................................................................. 50
10.2.4 Removing the program function............................................................................................. 51
10.3 Intercom settings .....................................................................................................................53
10.3.1 Accessing the "Intercom list" screen...................................................................................... 53
10.3.2 Adding an intercom............................................................................................................... 54
10.3.3 Removing the intercom......................................................................................................... 56
10.4 Audio settings..........................................................................................................................58
10.4.1 Accessing the "Audio settings" screen................................................................................... 58
10.4.2 Setting the feedback tone...................................................................................................... 59
10.4.3 Setting the ringtone volume................................................................................................... 60
10.4.4 Setting the ringtone type....................................................................................................... 61
10.5 Unlock password .....................................................................................................................63
10.6 Date and time settings.............................................................................................................66
10.7 Display settings .......................................................................................................................68
10.8 Language setting.....................................................................................................................69
10.9 About ......................................................................................................................................70
10.10 Restoring to factory default.......................................................................................................71
11 Cyber security....................................................................................................................................72
11.1 Disclaimer ...............................................................................................................................72
12 Notice................................................................................................................................................73

Notes on the instruction manual
Product manual
2TMD042000D0050
│
4
1Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place. If you pass the device on, also pass on this manual
along with it. ABB accepts no liability for any failure to observe the instructions in this manual.
2Safety
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
3Intended use
This device is an integral part of the ABB-Welcome door communication system and operates
exclusively with components from this system. The device must only be installed in dry indoor
rooms.
Cleaning
Caution
Risk of damage to the screen surface
The screen surface can be damaged by hard or sharp objects!
Never use such objects for entries on the touch screen monitor.
– Use your finger or a plastic stylus.
The screen surface can be damaged by cleaning fluids or abrasive agents!
– Clean the surfaces using a soft cloth and commercially available glass
cleaner.
– Never use abrasive cleaning agents.

Environment
Product manual
2TMD042000D0050
│
5
4Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
– The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
4.1 ABB devices
All packaging materials and devices from ABB bear the markings and test seals for proper
disposal. Always dispose of the packing materials and electric devices and their components via
an authorized collection facility or disposal company.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description
Product manual
2TMD042000D0050
│
6
5Product description
5.1 Device type
Article
number Product ID Product name Colour Size (mm)
M22411-W 2TMA210051W0001 Video Indoor Station 7 White 184.2 x 137.6 x 19
M22413-W 2TMA210051W0002 Video Indoor Station 7, T-
loop White 184.2 x 137.6 x 19

Product description
Product manual
2TMD042000D0050
│
7
5.2 Control elements
No. Description
17" colour display
2
Call button
■In standby status, press to access the "Intercom" screen.
■During a call request, press to accept the call.
■During communication, press to terminate the call.
■During surveillance, press to activate the manual call.
3
Unlock button
■In standby status, press to release the default lock of default outdoor station. Long press 3
seconds to enable/disable the "Auto unlock" function on the primary indoor station.
■During a call request or communication, press to release the default lock of the outdoor
station which is calling.
■During surveillance, press to release the default lock of the outdoor station which is under
surveillance.
4Program button
In standby status, press to release the 2nd lock of the defaultoutdoor station by default. If
multiple functions are set to the program button, press to access the "Program button" screen.
5
Mute button
■In standby status, press to activate/mute the ringtone.
■In standby status, long press to mute the ringtone of all indoor stations in the same
apartment.
■During a call request, press to activate/mute the ringtone and the call will be terminated after
5 seconds.
■During communication, press to activate/mute the microphone.
6
Surveillance button
■In standby status, press to monitor the default outdoor station.
■During call request, if "One on" mode is used on the (mini) system controller, only the primary
indoor station can show the image, for the secondary indoor station this button needs to be
pressed to obtain the image.
■During communication, long press to take a snapshot.
■During surveillance, press to switch to the next video stream or terminate the surveillance.
1
2 3 4 5 6 7
9
8

Product description
Product manual
2TMD042000D0050
│
8
7Setting button
■In standby status, press to enter the system settings.
■During a call request, communication or surveillance, press to set the volume, colour,
contrast and brightness.
8 Microphone
9Speaker
Induction loop
The induction loop is used for hearing-impaired persons. They can wear a hearing aid to hear
the voice from the outdoor station or the indoor station.
The indoor station supports the hearing aids with "T" function and the maximum distance
between them is around 35 cm.

Product description
Product manual
2TMD042000D0050
│
9
5.3 Terminal description
No. Description
1Default outdoor station address
Adjust the jumper connector to set the address of the default outdoor station (1-9).
2Indoor station hundreds digit
Adjust the jumper connector to set the hundreds digit of indoor station among "X200", "X100"
and "0".
3No function
4Primary/Secondary indoor station
Only one indoor station in each apartment can be set as "Primary" (ON=Primary).
5Terminal resistor
In video installations or mixed audio and video installations, the switch must be set as 'RC on'
on the last device of the line (ON=RC on).
6Indoor station tens digit
Adjust the jumper connector to set the tens digit of indoor station (0-9).
7Indoor station units digit
Adjust thejumper connector to set the units digit of indoor station (0-9).
8 a1, b1 = bus connector
9 A potential free contact, such as a doorbell pushbutton
10 Only for factory use
1
5
6
7
9
8
10
10
4
3
2

Technical data
Product manual
2TMD042000D0050
│
10
6Technical data
Designation Value
Operating voltage range 20-30 V
⎓
Standby current 24 V
⎓
, 8 mA
Operating current 24 V
⎓
, 290 mA
Operating temperature 5 °C…+45 °C
Storage temperature -20 °C…+60 °C
Single-wire clamps 2 x 0.28 mm2...2 x 0.75 mm2
Fine-wire clamps 2 x 0.28 mm2...2 x 0.75 mm2
Product dimension (WxHxD) 184.2 x 137.6 x 19 mm
IP level IP 30

Mounting/Installation
Product manual
2TMD042000D0050
│
11
7Mounting/Installation
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
7.1 Requirement for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
– Incorrect installation endangers your life and that of the user of the electrical
system.
– Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
– Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
– Use suitable personal protective clothing.
– Use only suitable tools and measuring devices.
– Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).

Mounting/Installation
Product manual
2TMD042000D0050
│
12
7.2 General installation instructions
■Terminate all branches of the wiring system via a connected bus device (e.g. indoor station,
outdoor station, system device).
■Do not install the system controller directly next to the bell transformer or other power
supplies (to avoid interference).
■Do not install the wires of the system bus together with 100-240 V wires.
■Do not use common cables for the connecting wires of the door openers and wires of the
system bus.
■Avoid bridges between different cable types.
■Use only two wires for the system bus in a four-core or multi-core cable.
■When looping, never install the incoming and outgoing bus inside the same cable.
■Never install the internal and external bus inside the same cable.

Mounting/Installation
Product manual
2TMD042000D0050
│
13
7.3 Mounting
7.3.1 Installation height
7.3.2 Surface-mounted installation
1.50 m (4.9 feet)
1
2

Mount
ing/Installation
Product manual
2TMD042000D0050
│
14
7.3.3 Dismantling

Commissioning
Product manual
2TMD042000D0050
│
15
8Commissioning
8.1 Operating instructions
Please read the rules below before use:
■To perform an operation by pressing the button below (e.g. press " " to perform " ").
■To switch the selection by pressing " " or " ", the order of selection is from top to
bottom and from left to right.
■To switch the number quickly by holding " " or " ".
■Press " " to carry out an operation like:
– Enter the setting status
– Confirm the update value
– Go to next screen
■Press " " to carry out an operation like:
– Exit the setting status
– Cancel the update value
– Go to previous screen

Commissioning
Product manual
2TMD042000D0050
│
16
8.2 Initial setup
You need to do the initial setup the first time this indoor station is powered on or this indoor
station is reset to the factory defaults.
Please follow the steps below:
[1] Select the language
A maximum of 17 languages for selection.

Commissioning
Product manual
2TMD042000D0050
│
17
[2] Show the licence agreement

Commissioning
Product manual
2TMD042000D0050
│
18
[3] Agree to the licence agreement
[4] Set the date and time
You can carry out this setting at this time or do it later by pressing "Next" to skip this setting.
For more details, see chapter 10.6 “Date and time settings“ on page 66.

Commissioning
Product manual
2TMD042000D0050
│
19
[5] Set the camera list
You can carry out this setting at this time or do it later by pressing "No" to skip this setting.
For more details, see chapter 10.1 “Camera list“ on page 36.
[6] Set the program button
You can carry out this setting at this time or do it later by pressing "No" to skip this setting.
For more details, see chapter 10.2 “Program button settings“ on page 47.

Commissioning
Product manual
2TMD042000D0050
│
20
[7] Set the intercom list
You can carry out this setting at this time or do it later by pressing "No" to skip this setting.
For more details, see chapter 10.3 “Intercom settings“ on page 53.
[8] Complete the initial setup