ABB CalMaster2 User manual

Field and Software Tools
CalMaster2
Quick Start Guide
IM/VCM2/QRG Issue 2
1Introduction
CalMaster IRIS and CheckMaster are stand-alone verification and
validation tools within the CalMaster2 Verification Suite.
There are two options of CalMaster2 available:
!CalMaster IRIS
Enables the printing of service reports and certification to
within 1% of factory calibration (fingerprinted flow meters) or
2% (non-fingerprinted flow meters). Predictive diagnostics are
also provided to provide early warning of a possible system
failure, enabling maintenance engineers to anticipate
problems and take planned remedial action in advance.
CalMaster2 comprises:
– CalMaster IRIS Verification Tool
– Enhanced IRIS Software
!CheckMaster
Enables the validation of flow meters and the printing of a
service report.
CheckMaster comprises:
– CheckMaster Validation Tool
– IRIS Software
2Unpacking
Unpack and visually inspect the CheckMaster.
Also packed with the CheckMaster are:
!CalMaster2 IRIS software CD.
!Instruction manual.
!Mains-operated battery charger & in-car adaptor
!5 MagMaster adaptors kits (Part no. WADX0089):
!CheckMaster Leads:
AquaMaster Communications Leads
(Red and yellow numeric sleeves)
AquaMaster Explorer Leads
(Red numeric sleeves)
MagMaster Leads
(Yellow numeric sleeves)
AquaMaster MIL Connector Leads
(Green numeric sleeves)
Sensor
Cable
Plug
MagMaster
VKE
Adaptor
Connection Lead 1
WEBC0221
WEBC2000 for RS232 Serial
Communications WEBC2000
AquaMaster Transmitter
Connection Lead 2
WEBC0222
AquaMaster Transmitter
Connection Lead 3
WEBC0223
AquaMaster MIL
Sensor Cable
WEBC0233
AquaMaster 19-way
Output Cable
WEBC235
AquaMaster 7-way Output Cable
WEBC0234
AquaMaster 7-way Output Cable
WEBC0232
MagMaster Connection Lead 2
WEBC0212
MagMaster Connection Lead 3
WEB0C213
AquaMaster Transmitter Connection Lead 2
WEBC211

3Charge the CheckMaste
r
C
harge the CheckMaster for a minimum of four hours before first
u
se.
aConnect the mains adaptor to the CalMaster2.
bPlug the CalMaster2 mains adaptor into the power socket.
cRecharge for at least four hours.
4Install the CalMaster2 IRIS software
Insert the CD into the computer; the install program should start
a
utomatically. If it does not, from the Windows Start menu, select
Run… and type D:\Setup.exe (where D is the drive letter of the CD)
a
nd click OK or press Enter.
Follow the on-screen instructions to install.
T
o run the software, select Start | Programs | ABB | CalMaster2.
Refer to the instruction manual (IM/VMC2) for complete details o
f
t
he CalMaster2 IRIS software.
3 2 1
b
a
c
5Register CalMaster2
From the CalMaster software, select Help | Register
CalMaster2… A registration screen appears:
1. Type the User name, Company name and Customer
identification number.
2. Select to either create a PDF of the registration or send the
details by email:
– To create a pdf, select the Create a pdf file for
printing or faxing check box.
– To send an email, leave the Create a pdf file for
printing or faxing check box unselected.
3. Click Next. Either an e-mail is sent to
[email protected] automatically or a PDF is created:
– If an e-mail was sent, a response is received within 24
hours. A confirmation message that the e-mail has
been sent appears.
– If a PDF was created, print the PDF and either send it
to:
ABB Limited
CalMaster Helpline
Oldends Lane, Stonehouse
Gloucestershire
GL10 3TA
UK
or Fax it to: [phone]
4. Click Close to exit CalMaster2.
6Connect the CheckMaster to the Compute
r
With the CalMaster2 software running:
aSlide the cover down to reveal the serial port.
bConnect the RS232 cable to the CalMaster2
cConnect the RS232 cable tothe computer.
From the CalMaster2 IRIS software, click the button. The
software checks that the CalMaster2 is connected.
7Verify a Flow Meter
Follow the detailed instructions in the manual (IM/VCM2) to
connect to a flow meter.
Note. The 'Customer identification number' is printed on the
label of the CD.
Note. As this is the first time that the CheckMaster has been
used, no flow meters are listed.
a
b
c
The Company’s policy is one of continuous product
improvement and the right is reserved to modify the
information contained herein without notice.
Printed in UK (09.06) © ABB 2006
A
BB Limited
O
ldends Lane, Stonehouse
G
loucestershire
G
L10 3TA
UK
T
el:[phone]
F
ax:[phone]
ABB Inc.
125 E. County Line Road
Warminster
PA 18974
USA
Tel:[phone]
Fax:[phone] IM/VCM2/QRG Issue 2