Acromag XMC-6260-CC User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

XMC-6260-CC
Terminator 4 ASIC Based
XMC Module
USER’S MANUAL
ACROMAG INCORPORATED
30765 South Wixom Road
Wixom, MI 48393-2417 U.S.A.
Tel: [phone]
Fax: [phone]
Copyright 2015, Acromag, Inc., Printed in the USA.
Data and specifications are subject to change without notice.
8501-002B

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 1 -
http://www.acromag.com
- 1 -
www.acromag.com
Table of Contents
1.0 GENERAL INFORMATION..............................................................................................4
Ordering Information...........................................................................................................5
Key Features........................................................................................................................5
Applications.........................................................................................................................5
Hardware Requirements......................................................................................................6
Software Requirements .......................................................................................................6
MAC Addresses....................................................................................................................6
2.0 PREPARATION FOR USE ...............................................................................................7
Unpacking and Inspecting ....................................................................................................7
Card Cage Considerations ....................................................................................................7
Board Installation......................................................................................................................................... 7
P15 Primary XMC Connector ....................................................................................................................... 7
P16 Secondary XMC Connector ................................................................................................................... 8
Non-Isolation Considerations...............................................................................................8
3.0 SOFTWARE/DRIVER INFORMATION........................................................................9
Software/Driver Download from Linux Source Tarball ..........................................................9
Software/Driver Download for Windows Operating Systems..............................................11
4.0 THEORY OF OPERATION ........................................................................................... 13
PCIE INTERFACE LOGIC .......................................................................................................14
Dual XAUI Interface ...........................................................................................................14
DDR3 .................................................................................................................................14
Clock Generation ...............................................................................................................14
Serial EEPROM...................................................................................................................14

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 2 -
http://www.acromag.com
- 2 -
www.acromag.com
Serial Flash ........................................................................................................................15
Temperature Sensor ..........................................................................................................15
Power System Devices .......................................................................................................15
5.0 SERVICE AND REPAIR................................................................................................. 17
Service and Repair Assistance ............................................................................................17
Preliminary Service Procedure ...........................................................................................17
Where to Get Help.............................................................................................................17
6.0 SPECIFICATIONS........................................................................................................... 18
PHYSICAL.................................................................................................................................................... 18
POWER REQUIREMENTS............................................................................................................................ 18
ENVIRONMENTAL ...................................................................................................................................... 18
Terminator 4 ASIC (U1) .............................................................................................................................. 19
P15 XMC Connector................................................................................................................................... 19
P16 XMC Connector................................................................................................................................... 20
Board Crystal.............................................................................................................................................. 20
DDR3 Memory ........................................................................................................................................... 20
256Kb EEPROM.......................................................................................................................................... 20
32Mb Flash ................................................................................................................................................ 20
Temperature Sensor .................................................................................................................................. 20
PCIe Bus Interface...................................................................................................................................... 20
XMC-6260-CC Block Diagram..............................................................................................21
Certificate of Volatility.......................................................................................................22
Revision History.................................................................................................................23

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 3 -
http://www.acromag.com
- 3 -
www.acromag.com
All trademarks are the property of their respective owners.
IMPORTANT SAFETY CONSIDERATIONS
You must consider the possible negative effects of power, wiring, component, sensor, or software failure in the
design of any type of control or monitoring system. This is very important where property loss or human life is
involved. It is important that you perform satisfactory overall system design and it is agreed between you and
Acromag, that this is your responsibility.
The information of this manual may change without notice. Acromag makes no warranty of any kind with
regard to this material, including, but not limited to, the implied warranties of merchantability and fitness
for a particular purpose. Further, Acromag assumes no responsibility for any errors that may appear in this
manual and makes no commitment to update, or keep current, the information contained in this manual.
No part of this manual may be copied or reproduced in any form without the prior written consent of
Acromag, Inc.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 4 -
http://www.acromag.com
- 4 -
www.acromag.com
RELATED PUBLICATIONS
The following manuals and part specifications provide the necessary information for in depth understanding of
the XMC-6260-CC board.
Chelsio T4/T5 Unified Wire for Linux
Installation and User’s Guide
http://service.chelsio.com
Chelsio T4/T5 Unified Wire for Windows
Installation and User Guide
http://service.chelsio.com
1.0 GENERAL INFORMATION
The XMC-6260-CC is a dual port XAUI 10 Gigabit Ethernet Unified Wire
adapter XMC module. This conduction cooled module is optimized for cloud
computing, HPC, virtualization, storage and other data center applications.
The heart of the XMC-6260-CC is Chelsio’s Terminator 4 (T4) ASIC. The T4
ASIC provides the highest 10GbE performance available and dramatically
lowers host-system CPU communications overhead with on-board hardware
that off-loads TCP/IP, iSCSI, FCoE and iWARP RDMA processing from its host
system. The XMC-6260-CC frees up host CPU cycles for useful applications.
As a result, the system achieves increased bandwidth, lower latency, and
lower power.
The XMC-6260-CC is an XMC module with eight high speed serial lanes
allocated to the XMC P15 connector. These lanes are used as an 8-lane PCIe
2.0 interface.
Two high speed XAUI Ethernet interfaces are routed from the ASIC to a
secondary XMC P16 connector. Each XAUI port is comprised of four lanes,
each operating at 3.125Gbps for a total of 10Gb/s of data throughput in
each direction.
The XMC-6260-CC has a 256kb EEPROM, 32Mb of serial flash memory, and
5Gb DDR3 SDRAM. The serial flash memory contains the ASIC’s internal
microprocessor firmware code. The EEPROM contains hardware and PCIe
configuration information. On power up, the ASIC will copy the firmware
from the flash into DRAM. The 5Gb of DDR3 will contain the data buffers
and connection information to support up to 32K offloaded connections.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 5 -
http://www.acromag.com
- 5 -
www.acromag.com
Ordering Information
The following table lists the orderable model and its description.
XMC-6260-CC-LF is conduction-cooled with an operating temperature of -
40C to +85C.
Table 1.1: The XMC-6260-CC
board is only available in a
lead free version.
MODEL
Description
XMC-6260-CC-LF
Lead Free, RoHS compliant
Key Features
An XMC-6260 block diagram, found at the end of this manual, illustrates the
key features listed below.
Terminator 4 ASIC –A high performance purpose-built protocol
processor with a single processor data-flow pipelined architecture that
delivers up to one million connections and simultaneously supports
wire-speed, fully offloaded TCP/IP, UDP, FCoE, iSCSI and iWARP RDMA
on a single unified wire.
DDR3 SDRAM –Provides 64 Meg x 72-bit DDR3 SDRAM. The SDRAM is
linked to the ASIC device for the storage of the ASIC’s internal
microprocessor firmware, data buffers and connection information to
support up to 32k offloaded connections.
P15 High Speed Interface –Eight high speed serial lanes are allocated to
the XMC P15 connector. These lanes are used as an 8 lane PCIe Gen 2
interface to the T4 ASIC.
P16 High Speed Interface –Eight high speed serial lanes are allocated to
the XMC P16 connector. These lanes are used as a dual port XAUI
interface to the T4 ASIC providing a full-duplex 10GbE interface.
Applications
Data-Center Networking
oScale up servers and network-attached storage (NAS) systems
oLink servers in multiple facilities to synchronize data centers
oConsolidate local area networks (LAN), storage area networks
(SAN) and cluster networks

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 6 -
http://www.acromag.com
- 6 -
www.acromag.com
Cloud Computing
oVirtualization features to maximize cloud scaling and utilization
oRuns InfiniBand, Fibre Channel apps unmodified on internet
oCloud ready functional and management features
oQuality of Service (QoS) and Traffic management
Networked Storage
oEnable high performance NAS systems and Ethernet-based IP
SANs
oDevelop shared-storage systems providing both file- and block-
level services
High Performance Computing
oVery low latency Ethernet
oIncrease cluster fabric bandwidth
oDeploy Ethernet-only networking for cluster fabric, LAN and SAN
Hardware Requirements
The XMC-6260-CC supports architectures with PCIE (x4, x8, x16) gen 2 slots.
Note that running a 10Gb adapter on a PCI x4 slot is not recommended as
performance will be significantly reduced by the limitations of PCI. PCIe Gen
2 is also backwards compatible with Gen 1; however, the use of Gen 1 will
also result in significantly reduced performance.
Software Requirements
The XMC-6260-CC has been developed to run on 64-bit Linux based
platforms as well as 64-bit Windows systems and therefore it is a base
requirement for running the driver. To know more about the complete list
of operating systems supported by each driver, please refer to the driver’s
README information available from Chelsio’s website at
http://service.chelsio.com.
MAC Addresses
A MAC ID has been assigned to each of the two XAUI ports on the XMC-6260-
CC. The base address has been listed on a label on the bottom side of the
board. The following MAC address will be the next increment of 8. For
example, if the base MAC ID is 00:01:C3:00:7F:5A, the other MAC ID is
00:01:C3:00:7F:62.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 7 -
http://www.acromag.com
- 7 -
www.acromag.com
2.0 PREPARATION FOR USE
Unpacking and Inspecting
WARNING: This board utilizes
static sensitive components
and should only be handled at
a static-safe workstation.
Upon receipt of this product, inspect the shipping carton for evidence of
mishandling during transit. If the shipping carton is badly damaged or water
stained, request that the carrier's agent be present when the carton is
opened. If the carrier's agent is absent when the carton is opened and the
contents of the carton are damaged, keep the carton and packing material
for the agent's inspection.
For repairs to a product damaged in shipment, refer to the Acromag Service
Policy to obtain return instructions. It is suggested that salvageable shipping
cartons and packing material be saved for future use in the event the
product must be shipped.
This board is physically protected with packing material and electrically
protected with an anti-static bag during shipment. However, it is
recommended that the board be visually inspected for evidence of
mishandling prior to applying power.
Card Cage Considerations
Refer to the specifications section for loading and power requirements. Be
sure that the system power supplies are able to accommodate the power
requirements of the system boards, plus the installed Acromag board,
within the voltage tolerances specified.
In an air cooled assembly, adequate air circulation must be provided to
prevent a temperature rise above the maximum operating temperature and
to prolong the life of the electronics. If the installation is in an industrial
environment and the board is exposed to environmental air, careful
consideration should be given to air-filtering.
In a conduction cooled assembly, adequate thermo conduction must be
provided to prevent a temperature rise above the maximum operating
temperature.
Board Installation
Remove power from the system before installing board, cables, termination
panels, and field wiring.
P15 Primary XMC Connector
The P15 primary XMC connector connects directly to the T4 ASIC via eight
lanes of Gen 2 PCI Express. The connector pin out, complies with the
ANSI/VITA 42.3-2006 pin definitions. Note that the XMC-6280 does not
support wakeup functionality and does not have a 3.3V aux line.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 8 -
http://www.acromag.com
- 8 -
www.acromag.com
This XMC connector is a 114-pin Samtec ASP-103614-05 connector. The
connector complies with the ANSI/VITA 42.3-2006.
P16 Secondary XMC Connector
Table 2.4: P16 XMC
Connector pin definitions.
*These pins are reserved for future use by the VITA 42.6 XMC 10 Gigabit
Ethernet 4-lane Protocol Layer Standard.
X(2:3)_RD[0:3]. Link 2 and 3 Differential Receive. These signals are used by
the XMC to receive high-speed protocol-specific data from the carrier over
Link 2 and 3. These signals tolerate EIA-644 signal levels.
X(2:3)_TD[0:3]. Link 2 and 3 Differential Transmit. These signals are used by
the XMC to transmit high-speed protocol-specific data from the carrier over
Link 2 and 3. These signals tolerate EIA-644 signal levels.
A
B
C
D
E
F
01
X2_TD0p
X2_TD0n
NC
X2_TD1p
X2_TD1n
NC
02
GND
GND
NC
GND
GND
NC
03
X2_TD2p
X2_TD2n
NC
X2_TD3p
X2_TD3n
NC
04
GND
GND
NC
GND
GND
NC
05
X3_TD0p
X3_TD0n
NC
X3_TD1p
X3_TD1n
NC
06
GND
GND
NC
GND
GND
NC
07
X3_TD2p
X3_TD2n
NC
X3_TD3p
X3_TD3n
NC
08
GND
GND
NC
GND
GND
NC
09
RFU*
RFU*
NC
RFU*
RFU*
NC
10
GND
GND
NC
GND
GND
NC
11
X2_RD0p
X2_RD0n
NC
X2_RD1p
X2_RD1n
NC
12
GND
GND
NC
GND
GND
NC
13
X2_RD2p
X2_RD2n
NC
X2_RD3p
X2_RD3n
NC
14
GND
GND
NC
GND
GND
NC
15
X3_RD0p
X3_RD0n
NC
X3_RD1p
X3_RD1n
NC
16
GND
GND
NC
GND
GND
NC
17
X3_RD2p
X3_RD2n
NC
X3_RD3p
X3_RD3n
NC
18
GND
GND
NC
GND
GND
NC
19
RFU*
RFU*
NC
RFU*
RFU*
NC
Non-Isolation Considerations
The board is non-isolated, since there is electrical continuity between the
logic and field I/O grounds. As such, the field I/O connections are not
isolated from the system. Care should be taken in designing installations
without isolation to avoid noise pickup and ground loops caused by multiple
ground connections.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 9 -
http://www.acromag.com
- 9 -
www.acromag.com
3.0 SOFTWARE/DRIVER INFORMATION
Software/Driver Download from Linux Source Tarball
1. Go to service.chelsio.com and search the downloads as shown below.
2. In the SEARCH RESULTS choose the source tarball.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 10 -
http://www.acromag.com
- 10 -
www.acromag.com
3. Read and accept the Chelsio End User License Agreement.
4. Also download the Chelsio support documentation including the README, Release Notes and User Guide.
Refer to the User Guide for information on how to properly install and use the Chelsio drivers.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 11 -
http://www.acromag.com
- 11 -
www.acromag.com
Software/Driver Download for Windows Operating Systems
1. Go to http://service.chelsio.com and search the downloads as shown below.
2. In the SEARCH RESULTS select the desired release based on operating system and functionality. For
example, this release is for Windows Server 2012 and supports NIC, NDK and ND functionalities. Click
on Older Releases to view older releases. Click Download to download the driver.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 12 -
http://www.acromag.com
- 12 -
www.acromag.com
3. Read and accept the Chelsio End User License Agreement.
4. Download the Chelsio support documentation including the README, Release Notes and User Guide.
Refer to the User Guide for information on how to properly install and use the Chelsio drivers.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 13 -
http://www.acromag.com
- 13 -
www.acromag.com
4.0 THEORY OF OPERATION
Figure 4.1: XMC-6260-CC Block
Diagram
This section contains information regarding the design of the board. A
description of the basic functionality of the circuitry used on the board is also
provided. Refer to the XMC-6260-CC Block Diagram, shown below, as you
review this material.
CARRIER BOARD
CHELSIO T4 ASIC
SERIAL
EEPROM
SERIAL
FLASH
RESET
50 MHZ
XTAL
P15
P16
BACKPLANE
DDR III
512 Mb
X16
-1600
XMC
Conduction
Cooled
PCIE 2.0 x8 SMB
Dual XAUI
Dual XAUI
5 x DDRIII
DC/DC @
1.0v,1.2v,1.5v,
2.5v & 3.3v
TEMP
SENSOR

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 14 -
http://www.acromag.com
- 14 -
www.acromag.com
PCIE INTERFACE LOGIC
Dual XAUI Interface
DDR3
Clock Generation
Serial EEPROM
The XMC-6260-CC host interface is through PCI Express 2.0 which provides a
5Gbps interface to the carrier/CPU board. The PCIe interface supports 8
physical functions (PF). SR-IOV is supported on 4 PF with 128 virtual
functions (VF). It supports x1, x2, x4 and x8 link widths. Maximum payload
sizes and memory read request sizes of 128B to 2KB are supported, with up
to 128 outstanding PCIe reads.
The board contains two XAUI ports routed from the T4 ASIC’s integrated full-
duplex Ethernet MACs directly to the P16 XMC connector. Each XAUI port is
comprised of 4 lanes, each operating at a speed of 3.125Gbps. With 8b/10b
encoding, each XAUI port provides 10Gbps throughput in each direction.
These XAUI links correlate with links 2 and 3 of the VITA 42.6 specification.
There is a 64 Meg x 72-bit of DDR3 memory onboard for the purpose of
storing connection states and buffers for up to 32K offloaded connections.
Five DDR3 memory devices are used to form a 72-bit data bus. Each of the
devices are 64 Meg x 16 bit (1Gb) in size.
There is one onboard 50MHz XTAL providing the core clock to the T4 ASIC.
This XTAL is all that is needed in order for the ASIC to internally produce the
necessary clocks needed for operation.
There is a 256Kb Atmel SPI Serial EEPROM which contains all the hardware
configuration including things like pll multipliers and PCIe information. It
also contains information on how to configure the firmware for the T4 ASIC
including things like how to set up the DDR3 and the number of ports
available on the card.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 15 -
http://www.acromag.com
- 15 -
www.acromag.com
Serial Flash
Temperature Sensor
Power System Devices
This Serial EEPROM is not intended to be reprogrammed by the customer,
and doing so could cause a device failure.
The 32 Mb serial flash contains all the ASIC’s internal microprocessor
firmware code. Once the ASIC and microprocessor boots itself, the EEPROM
is read first to get configuration information. Then the ASIC copies the
firmware from the flash to DDR3 memory and runs everything from there.
This Serial EEPROM is not intended to be reprogrammed by the customer,
and doing so could cause a failure in the device. The driver will auto-load the
firmware if an update is required. The kernel must be configured to enable
userspace firmware loading support:
Device Drivers Generic Driver Options Userspace firmware loading
support
A Texas Instruments TMP421 temperature sensor is connected to the
thermal pins of the Terminator 4 ASIC to monitor the junction temperature
of the ASIC and also the local temperature of the temperature senor. The
ASIC has been designed to shut down at junction temperatures above 115
degrees Celsius. This is in an attempt to save the chip from being damaged
and is not a guarantee that it will not be damaged.
The power to the XMC-6260-CC is taken from the XMC P15 connector
VPWR_5/12 pins. The VPWR_5/12 power is the V in voltage to the three
LTM4602 devices U16, U17 and U18 and also to the LTM4601 devices U19
and U21. The LTM4602 devices output +2.5V, +1.5V and +1.2V while the
LTM4601 devices output +1.0V. The +1.5V supply is input to the TPS51200
device U15 to output +0.75V for DDR3 termination.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 16 -
http://www.acromag.com
- 16 -
www.acromag.com
Figure 4.2: Power Distribution
Figure 4.3: Power System
Device
Reference
Designator
Description
Power Rail
Name
Power Rail
Current
LTM4602
U17
ASIC, PCIe,
Ethernet
P2_5V
6.0A
LTM4602
U16
ASIC, DDR3,
PCIe, Ethernet
P1_5V
6.0A
TPS51200
U15
DDR3
Termination
DDR3_VTT
+/-2A
LTM4602
U18
ASIC, Ethernet
P1_2V
6.0A
LTM4601
U19
ASIC, PCIe,
P1_0V
12A
LTM4601
U21
ASIC, PCIe
P1_0V
12A

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 17 -
http://www.acromag.com
- 17 -
www.acromag.com
5.0 SERVICE AND REPAIR
Service and Repair Assistance
Preliminary Service Procedure
Where to Get Help
Surface-Mounted Technology (SMT) boards are generally difficult to repair.
It is highly recommended that a non-functioning board be returned to
Acromag for repair. The board can be easily damaged unless special SMT
repair and service tools are used. Further, Acromag has automated test
equipment that thoroughly checks the performance of each board. When a
board is first produced and when any repair is made, it is tested before
shipment.
Please refer to Acromag's Service Policy Bulletin or contact Acromag for
complete details on how to obtain parts and repair.
CAUTION: POWER MUST
BE TURNED OFF BEFORE
REMOVING OR INSERTING
BOARDS
Before beginning repair, be sure that all of the procedures in the
"Preparation for Use" section have been followed. Also, refer to the
documentation of your board to verify that it is correctly configured.
Replacement of the board with one that is known to work correctly is a good
technique to isolate a faulty board.
If you continue to have problems, your next step should be to visit the
Acromag worldwide web site at http://www.acromag.com. Our web site
contains the most up-to-date product and software information.
Acromag’s application engineers can also be contacted directly for technical
assistance via email, telephone, or FAX through the contact information
listed at the bottom of this page. When needed, complete repair services
are also available.

XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: [phone] - 18 -
http://www.acromag.com
- 18 -
www.acromag.com
6.0 SPECIFICATIONS
PHYSICAL
Height 13.5 mm (0.531 in)
Stacking Height 10.0 mm (0.394 in)
Depth 143.75 mm (5.866 in)
Width 74.0 mm (2.913 in)
Board Thickness 1.57 mm (0.062 in)
Unit Weight: 3.9316oz (111.46g)
POWER REQUIREMENTS
ENVIRONMENTAL
Power will vary dependent on
the application.
3.3 VDC (5%) Typical 50 mA Max. 100 mA
+12/5 VDC (5%) Typical 1 A Max. 1.5 A
-12 VDC (5%) 0mA
On Board 1.0V Power to
T4 ASIC
Current Rating
(available for the T4 ASIC)
1.0V (5%)
12A typical
24A maximum
Operating Temperature
Model
Operating Temperature
XMC-6260-CC-LF
-40  C to 85  C
Relative Humidity: 5-95% Non-Condensing.
Storage Temperature: -55C to 100C.