ADF Web HD67672-IP-2-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 1 di 32
User Manual
Revision 1.100
English
BACnet/IP Slave / Modbus Slave -
Converter
(Order Code: HD67672-I -2-A1, HD67672-I -4-A1)
BACnet MS/TP Slave / Modbus Slave -
Converter
(Order Code: HD67672-MST -2-A1, HD67672-MST -4-A1)
For Website information:
www.adfweb.com? roduct=HD67672
For rice information:
www.adfweb.com? rice=HD67672-I -2-A1
www.adfweb.com? rice=HD67672-I -4-A1
www.adfweb.com? rice=HD67672-MST -2-A1
www.adfweb.com? rice=HD67672-MST -4-A1
Benefits and Main Features:
Very easy to configure
Electrical isolation
Temperature range: -40°C/85°C (-40°F/185°F)
For others BACnet slave products see also the following link:
Converter BACnet to
www.adfweb.com? roduct=HD67056 (M-Bus Master)
www.adfweb.com? roduct=HD67086 (M-Bus Wireless)
www.adfweb.com? roduct=HD67170 (SNMP Mana er)
www.adfweb.com? roduct=HD67670 (DMX)
www.adfweb.com? roduct=HD67671 (Modbus Master)
www.adfweb.com? roduct=HD67673 (Modbus TCP Master)
www.adfweb.com? roduct=HD67674 (Modbus TCP Slave)
www.adfweb.com? roduct=HD67675 (PROFIBUS Master)
www.adfweb.com? roduct=HD67676 (PROFIBUS Slave)
www.adfweb.com? roduct=HD67677 (CAN)
www.adfweb.com? roduct=HD67678 (CANopen)
www.adfweb.com? roduct=HD67679 (PROFINET)
www.adfweb.com? roduct=HD67680 (DeviceNet Master)
www.adfweb.com? roduct=HD67681 (DeviceNet Slave)
www.adfweb.com? roduct=HD67682 (EtherNet/IP Slave)
www.adfweb.com? roduct=HD67683 (NMEA 2000)
www.adfweb.com? roduct=HD67685 (J1939)
www.adfweb.com? roduct=HD67689 (EtherNet/IP Master)
www.adfweb.com? roduct=HD67693 (SNMP A ent)
www.adfweb.com? roduct=HD67802 (KNX)
www.adfweb.com? roduct=HD67833 (DALI)
www.adfweb.com? roduct=HD67938 (MQTT)
Do you have an your customer protocol?
www.adfweb.com? roduct=HD67003
Do you need to choose a device? do you want help?
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 2 di 32
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 9
CONFIGURATION 9
OWER SU LY 10
FUNCTION MODES 11
LEDS (HD67672-I -X-A1) 12
LEDS (HD67672-MST -X-A1) 13
RS485 14
RS232 15
ETHERNET 15
USE OF COM OSITOR SW67672 16
NEW ROJECT / O EN ROJECT 17
SOFTWARE O TIONS 18
SET COMMUNICATION 20
SET BACNET ACCESS 23
SET BDT ACCESS 25
BACNET EDE FILE 25
U DATE DEVICE 26
MODBUS MA 28
MECHANICAL DIMENSIONS 29
ORDERING INFORMATIONS 30
ACCESSORIES 30
DISCLAIMER 31
OTHER REGULATIONS AND STANDARDS 31
WARRANTIES AND TECHNICAL SU ORT 32
RETURN OLICY 32
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you
that you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document
code” that appears at the top right-hand corner of each page of this
document.
With this “Document Code” go to web page
www.adfweb.com/download/ and search for the corresponding code on
the page. Click on the proper “Document Code” and download the
updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the right to change information in this manual
about our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision Date Author Chapter Description
1.000 15/02/2013 Fl All First Release
1.001 01/08/2013 Fl All Revision
1.100 21/08/2018 Ff All Added MST version

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 3 di 32
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 4 di 32
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 5 di 32
CONNECTION SCHEME:
Figure 1a: Connection scheme for HD67672-I -2-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 6 di 32
Figure 1b: Connection scheme for HD67672-I -4-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 7 di 32
Figure 1c: Connection scheme for HD67672-MST -2-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 8 di 32
Figure 1d: Connection scheme for HD67672-MST -4-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 9 di 32
CHARACTERISTICS:
The HD67672 is a BACnet / Modbus Slave - Converter.
It has the following characteristics:
Up to 2000 BACnet objects;
Triple isolation between BACnet - ower Supply, BACnet - Modbus, ower Supply - Modbus.
Two-directional information between BACnet bus and Modbus bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67672 software on your C in order to perform the following:
Define the parameter of BACnet line;
Define the parameter of Modbus line;
Define BACnet objects that contains the data sent by the Modbus Master;
Define BACnet objects that contains the data to send to the Modbus Master;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 10 di 32
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67672-I -x-A1 3.5
HD67672-MST -x-A1 3.5
HD67672-I -x-A1
HD67672-MST -x-A1
Caution: Not reverse the polarity power

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 11 di 32
FUNCTION MODES:
The device has got two functions mode depending of the position of the ‘Dip2 of Dip-Switch A’:
The first, with ‘Dip2 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip2 of Dip-Switch A’ at “ON” position, is used for upload the roject and/or Firmware.
For the operations to follow for the updating, see ‘U DATE DEVICE’ section.
According to the functioning mode, the LEDs will have specifics functions, see ‘LEDS’ section.
Warning:
Dip1 of ‘Dip-Switch A’ must be at ON position for working even if the Ethernet cable isn’t inserted.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 12 di 32
LEDS (HD67672-IP-x-A1):
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ] ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: Modbus comm. Blinks when a Modbus request is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: Device state Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Not used OFF Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet2 Tx Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 13 di 32
LEDS (HD67672-MSTP-x-A1):
The device has got four LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: Device state Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
2: Ethernet link
ON: Ethernet cable inserted
OFF: Ethernet cable not inserted
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BACnet comm. Blinks when BACnet communication is running Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Modbus comm. Blinks when a Modbus request is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 14 di 32
RS485:
For terminate the RS485 line with a 120Ω resistor it is necessary to put ON dip 1, like in figures.
The maximum length of the cable should be 1200m (4000 feet).
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 15 di 32
RS232:
The connection from RS232 socket to a serial port (example one from a personal computer) must be made with a NULL MODEM cable (a
serial cable where the pins 2 and 3 are crossed).
It is recommended that the RS232 cable not exceed 15 meters.
ETHERNET:
The BACnet/I communication and the updating must be made using Connector3 and/or Connector4 and/or Connector5 of HD67672 with at
least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative
to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the
device to a C/ LC/other is recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 16 di 32
USE OF COMPOSITOR SW67672:
To configure the Converter, use the available software that runs with Windows called SW67672. It is downloadable from the site
www.adfweb.com and its operation is described in this document (this manual is referenced to the last version of the software present on our
web site). The software works with MSWindows (X , Vista, Seven, 8, 10; 32/64bit).
When launching the SW67672, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67672

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 17 di 32
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Confi uration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a rogrammable “BACnet Slave / Modbus Slave -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Confi uration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 18 di 32
SOFTWARE OPTIONS:
By pressing the “Settin s” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Pro ram”, the
SW67672 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 19 di 32
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BACnet Slave / Modbus Slave
Document code: MN67672_ENG Revision 1.100 agina 20 di 32
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, BACnet and Modbus.
By ressing the “Set Communication” button from the main window for SW67672 (Fig. 2) the window
“Set Communication” appears (Fig. 3).
The window is divided in three sections, one for selecting the type of BACnet (in relation to the device
used), one for the BACnet parameters and the other for the Modbus parameters.
In the section “BACnet Type” is possible to select the type of BACnet to use from:
BACnet/I (uses Ethernet);
BACnet MS/T (uses RS485).
If selected “BACnet/I ” the means of the fields for “BACnet” are:
In the fields “IP ADDRESS” the I address of BACnet/I side of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of BACnet/I side of the converter is defined;
In the fields “GATEWAY” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “Port” the port used for BACnet communication is defined. The default port used for
BACnet communication is 47808, but is possible to insert any value (except 10000 and 10001);
In the field "BACnet Device Name" the name of BACnet/I side of the converter is defined;
In the field “Device Identifier” the ID of BACnet/I side of the converter is defined;
If the field “BACnet description up to 32 chars” is checked, the description for the BACnet
Objects can be up to 32 chars long;
If the field “Enable BBMD” is checked, the BACnet/I Broadcast Management Device function is
enabled;
If the field “Accept FDR” is checked, the converter accepts the Foreign Device Registration.
Figure 3: “Set Communication” window