ADF Web HD67D27-B2-868MHz User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 1 of 29
User Manual
Revision 1.000
English
LoRaWAN / KNX - Converter
(Order Code: HD67D27-B2-868MHz)
For Website information:
www.adfweb.com? roduct=HD67D27-B2
For rice information:
www.adfweb.com? rice=HD67D27-B2-868MHz
Benefits and Main Features:
Very easy to configure
ower Supply 18…35V DC and 8…24 V AC
Temperature range: -40°C/+85°C (-40°F/+185°F)
For others LoRaWAN products, see also the following links:
Converter LoRaWAN to
www.adfweb.com? roduct=HD67D01 (Modbus Master)
www.adfweb.com? roduct=HD67D02 (Modbus S ave)
www.adfweb.com? roduct=HD67D03 (Modbus TCP Master)
www.adfweb.com? roduct=HD67D04 (Modbus TCP S ave)
www.adfweb.com? roduct=HD67D05 (Seria )
www.adfweb.com? roduct=HD67D15 (M-Bus)
www.adfweb.com? roduct=HD67D16 (BACnet Master)
www.adfweb.com? roduct=HD67D17 (BACnet S ave)
www.adfweb.com? roduct=HD67D18 (Ethernet)
www.adfweb.com? roduct=HD67D19 (CAN)
www.adfweb.com? roduct=HD67D20 (CANopen)
www.adfweb.com? roduct=HD67D21 (DeviceNet Master)
www.adfweb.com? roduct=HD67D22 (DeviceNet S ave)
www.adfweb.com? roduct=HD67D23 (DMX)
www.adfweb.com? roduct=HD67D24 (EtherNet/IP Master)
www.adfweb.com? roduct=HD67D25 (EtherNet/IP S ave)
www.adfweb.com? roduct=HD67D26 (J1939)
www.adfweb.com? roduct=HD67D28 (NMEA 0183)
www.adfweb.com? roduct=HD67D29 (NMEA 2000)
www.adfweb.com? roduct=HD67D30 (PROFIBUS Master)
www.adfweb.com? roduct=HD67D31 (PROFIBUS S ave)
www.adfweb.com? roduct=HD67D32 (PROFINET Master)
www.adfweb.com? roduct=HD67D33 (PROFINET S ave)
www.adfweb.com? roduct=HD67D34 (IEC61850 C ient)
www.adfweb.com? roduct=HD67D35 (IEC61850 Server)
www.adfweb.com? roduct=HD67D36 (MQTT)
www.adfweb.com? roduct=HD67D37 (OPC UA C ient)
www.adfweb.com? roduct=HD67D38 (OPC UA Server)
www.adfweb.com? roduct=HD67D39 (S7comm)
www.adfweb.com? roduct=HD67D40 (SNMP Manager)
www.adfweb.com? roduct=HD67D41 (SNMP Agent)
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 2 of 29
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
OWER SU LY 7
FUNCTION MODES 8
LEDS 9
LORAWAN 10
KNX 11
ETHERNET 12
USE OF COM OSITOR SW67D27 13
NEW CONFIGURATION / O EN CONFIGURATION 14
SOFTWARE O TIONS 15
SET COMMUNICATION 17
LORAWAN ACCESS 19
KNX ACCESS 21
U DATE DEVICE 23
LORAWAN AYLOAD 25
MECHANICAL DIMENSIONS 26
ORDERING INFORMATIONS 27
ACCESSORIES 27
DISCLAIMER 28
OTHER REGULATIONS AND STANDARDS 28
WARRANTIES AND TECHNICAL SU ORT 29
RETURN OLICY 29
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision Date Author Chapter Description
1.000 04/12/2020 Ff All First release version

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 3 of 29
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 4 of 29
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 5 of 29
CONNECTION SCHEME:
Figure 1: Connection scheme for HD67D27-B2- MHz

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 6 of 29
CHARACTERISTICS:
The HD67D27-B2 is a LoRaWAN / KNX Converter.
It allows the following characteristics:
Electrical isolation between KNX and ower Supply;
Mountable on 35mm Rail DIN;
Wide power supply input range: 12…35V DC and 8…24V AC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67D27 software on your C in order to perform the following:
Define the parameter of KNX line;
Define the parameter of LoRaWAN line;
Define the list of LoRaWAN messages in uplink and downlink to the LoRaWAN gateway;
Define the list of KNX data points in read and write;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 7 of 29
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67D27-B2-xxxMHz 3.5
HD67D27
-
B2
-
xxxMHz
Caution: Not reverse the po arity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 8 of 29
FUNCTION MODES:
The device has got two functions mode depending of the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for upload the roject and/or Firmware.
For the operations to follow for the updating, see ‘U DATE DEVICE’ section.
According to the functioning mode, the LEDs will have specifics functions, see ‘LEDS’ section.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 9 of 29
LEDS:
The device has got four LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Norma Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress
2: LoRaWAN communication
(yellow) Blinks when LoRaWAN data is received B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress
3: KNX communication
(yellow) Blinks when a KNX message is received B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress
4: Error state (yellow) ON: An error in the communication busses occurs
OFF: No errors are present
B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress
5: KNX rogrammation (red) ON: KNX rogrammation activated
OFF: KNX rogrammation not activated
B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 10 of 29
LORAWAN:
The LoRaWAN® specification is a Low ower, Wide Area (L WA) networking protocol
designed to wirelessly connect battery operated ‘things’ to the internet in regional, national
or global networks, and targets key Internet of Things (IoT) requirements such as bi-
directional communication, end-to-end security, mobility and localization services.
LoRaWAN® network architecture is deployed in a star-of-stars topology in which gateways
relay messages between end-devices and a central network server.
The wireless communication takes advantage of the Long Range characteristics of the LoRa
physical layer, allowing a single-hop link between the end-device and one or many
gateways. All modes are capable of bi-directional communication, and there is support for
multicast addressing groups to make efficient use of spectrum during tasks such as
Firmware Over-The-Air (FOTA) upgrades or other mass distribution messages.
Converters from HD67D27 serie act as end-devices and they can communicate with one or
more LoRwaWAN Gateways.
The converters support all the standard datarates and they work both on public and private
networks.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 11 of 29
KNX:
KNX is the standard that allows the automated and decentralized management of the technologic plans of
a big typology of structures: commercial buildings, factories, houses, public locals, schools and so on.
KNX can be used in all the applications and functions for the building automations: from lighting to
control dampers, to the security, to the heating monitoring, to the conditioning, to the hydric control and
alarms, to energy management and so on.
Characteristics Description TP1-256
Medium Shielded Twisted air
Topology Linear, Star, Tree or mixed
Baudrate 9600 bps
Device supplying Normal: bus powered devices
Optional: remote powered devices
Device power consumption 3 mA- 12 mA
ower Supply Unit ( SU) DC 30 V
Number of SU’s per physical
Segment Max. 2
Number of connectable devices
per physical Segment Max. 256
Number of addressable devices
per physical Segment Max. 255
Total cable length per physical
Segment Max. 1000 m
Distance between two devices Max. 700 m
(*) Taken from KNX specifications

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 12 of 29
ETHERNET:
The Ethernet port is used for programming the device.
The Ethernet connection must be made using Connector2 of HD67D27-B2 with at least a Category 5E cable. The maximum length of the
cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a C is recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 13 of 29
USE OF COMPOSITOR SW67D27:
To configure the Converter, use the available software that runs with Windows called SW67D27. It is downloadable on the site
www.adfweb.com and its operation is described in this document. The software works with MS Windows (X , Vista, Seven, 8, 10; 32/64bit).
When launching the SW67D27, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67D
27

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 14 of 29
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a rogrammable “LoRaWAN / KNX - Converter” in order
to configure another device in the same manner, it is necessary to maintain the folder
and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 15 of 29
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67D27 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 16 of 29
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 17 of 29
SET COMMUNICATION:
By ressing the “Set Communication” button from the main window for SW67D27 (Fig.
2) the window “Set Communication” appears (Fig. 3).
The means of the fields for the “LoRaWAN” section are:
In the field “RF Band” the wireless band used for LoRaWAN communication is
defined;
In the field “Network Type” the type of LoRaWAN network is defined;
If the field “Adaptive Data Rate” is checked, the converter will enable the ADR
functionalities to select the best data rate to be used in relation to the
environmental conditions;
In the field “Data Rate” the data rate for LoRaWAN communication is defined;
In the field “Transmission Type” the type of LoRaWAN communication is defined;
In the field “Max Pay oad Size” the maximum dimension of the LoRaWAN
messages is defined (fixed in relation to the data rate selected);
In the field “Activation Method” the method used to join into a LoRaWAN network
is defined;
In the field “Device Address” the device identifier (DevEUI) is defined (only for
AB method);
In the field “App ication Identifier” the application identifier (AppEUI) is defined
(only for AB method);
In the field “Network Session Key” the key used for the communication with the
LoRaWAN gateway (NwkSKey) is defined (only for AB method);
In the field “App ication Session Key” the key for encryption and decryption of
the payload (AppSKey) is defined (only for AB method);
If OTAA method is selected, in the field “App ication Key” the secret key for the
dynamic activation of the converter in the LoRAWAN network is defined.
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 18 of 29
The means of the fields for “KNX” are:
In the field “Type” the type of KNX is defined (fixd to ‘KNX T ’);
In the field “ID Device” the ID of the KNX side of the converter is defined.
The means of the fields for the “Ethernet” section are:
In the fields “IP ADDRESS” the I address of Ethernet side of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of Ethernet side of the converter is defined;
In the fields “GATEWAY” the default gateway of the network is defined. This feature can be enabled or disabled pressing the Check
Box field. This feature is used for going out of the net;
In the field “DNS” the DNS address is defined. This field is required if the server address is define by URL and not I Address.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 19 of 29
Figure 4a: “LoRAWAN Access  LoRaWAN Uplink” window
LORAWAN ACCESS:
By ressing the “LoRaWAN Access” button from the main window for SW67D27 (Fig. 2) the window “Set LoRaWAN Access” appears (Fig.
4).
This section is used to define the LoRAWAN messages where the converter will place the data read from KNX (Uplink) and the LoRAWAN
messages that the converter will take (Downlink) for writing the data to KNX.
L O R A WAN U PLINK
The means of the fields are:
If the field “Enab e” is checked, the LoRaWAN message is enabled;
In the field “Start Byte” the starting byte of the internal memory array where taking the data is defined;
In the field “Num. Byte” the number of consecutive bytes to take from the internal array starting from “Start Byte” is defined;
If the field “On Change” is checked, the LoRaWAN message is sent only when the data from KNX change;
If the field “On CMD” is checked, the LoRaWAN message is sent when a KNX message is received;
If the field “On Timer” is checked, the LoRaWAN message is sent cyclically with the delay defined in “Time (s)” field;
In the field “Mnemonic” a description of the message is defined.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 age 20 of 29
Figure 4b: “LoRAWAN Access  LoRaWAN Downlink” window
L O R A WAN D OWNLINK
The means of the fields are:
If the field “Enab e” is checked, the LoRaWAN message is enabled;
In the field “Start Byte” the starting byte of the internal memory array where placing the data is defined;
In the field “Num. Byte” the number of consecutive bytes to write to the internal array starting from “Start Byte” is defined;
In the field “Mnemonic” a description of the message is defined.