ADLINK Technology cPCI-6530 Series User manual

Advance Technologies; Automate the World.
Manual Rev.: 1.00 preliminary
Revision Date: December 30, 2013
Part No: 50-15096-1000
cPCI-6530 Series
Performance 6U CompactPCI®
Intel® Core™ i7/i5 Processor Blade
User’s Manual

ii Revision History
Revision History
Revision Release Date Description of Change(s)
1.00 2013/12/30 Preliminary release

Preface iii
cPCI-6530
Preface
Copyright 2013 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Using this Manual
Audience and Scope
The cPCI-6530 User’s Manual is intended for hardware
technicians and systems operators with knowledge of installing,
configuring and operating industrial grade single board computers.
Manual Organization
This manual is organized as follows:
Chapter 1, Introduction: Introduces the cPCI-6530, its features,
block diagrams, and package contents.
Chapter 2, Specifications: Presents detailed specification infor-
mation, power consumption, and technical drawings.
Chapter 3, Functional Description: Describes the cPCI-6530
main functions.
Chapter 4, Board Interfaces: Describes the cPCI-6530 board
interfaces.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.

Preface v
cPCI-6530
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

vi Preface
This page intentionally left blank.

vii
cPCI-6530
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 Package Contents ............................................................... 3
2 Specifications..................................................................... 5
2.1 cPCI-6530 Processor Blade Specifications......................... 5
2.2 Block Diagrams.................................................................... 8
2.3 I/O Connectivity Table ......................................................... 9
2.4 Power Requirements......................................................... 10
3 Functional Description .................................................... 13
3.1 Processors......................................................................... 13
3.2 Chipset............................................................................... 15
3.3 PMC/XMC.......................................................................... 16
3.4 Intel® Turbo Boost Technology......................................... 16
3.5 Intel® Hyper-Threading Technology.................................. 16
3.6 Trusted Platform Module ................................................... 17
3.7 Battery ............................................................................... 18
4 Board Interfaces............................................................... 19
4.1 cPCI-6530V Board Layout................................................. 19
4.2 cPCI-6530 Board Layout ................................................... 20

viii
4.3 cPCI-6530 Series Front Panel........................................... 21
4.4 Connector Pin Assignments............................................... 23
Important Safety Instructions............................................... 39
Getting Service...................................................................... 41

List of Figures ix
cPCI-6530
List of Figures
Figure 2-1: cPCI-6530 Blade Functional Block Diagram....................8
Figure 4-1: cPCI-6530V Series Board Layout..................................19
Figure 4-2: cPCI-6530 Series Board Layout....................................20
Figure 4-3: cPCI-6530 Series Front Panel Layout...........................21

xListofFigures
This page intentionally left blank.

List of Tables xi
cPCI-6530
List of Tables
Table 2-1: cPCI-6530 Processor Blade Specifications.....................5
Table 2-2: cPCI-6530 I/O Connectivity .............................................9
Table 4-1: cPCI-6530 Front Panel System LED Descriptions ........22
Table 4-2: USB 2.0 Pin Definition...................................................23
Table 4-3: DVI-I Connector Pin Definition.......................................24
Table 4-4: RJ-45 GbE Pin Definitions.............................................25
Table 4-5: LAN LED Status Definitions...........................................25
Table 4-6: Front Panel COM Pin Definitions...................................26
Table 4-7: COM RJ-45 to DB-9 Cable Pin Definitions....................26
Table 4-8: Serial ATA 7-pin Connector Pin Definition.....................27
Table 4-9: Serial ATA Connector with power Pin Definition............27
Table 4-10: SATA Board-to-Board Connector Pin Definition............28
Table 4-11: CFast Socket Pin Definition...........................................29
Table 4-12: PMC Connector Pin Definitions.....................................31
Table 4-13: XMC Connector Pin Definition.......................................32
Table 4-14: CompactPCI J1 Connector Pin Definition......................33
Table 4-15: CompactPCI J2 Connector Pin Definition......................34
Table 4-16: CompactPCI J3 Connector Pin Definition......................35
Table 4-17: CompactPCI J4 Connector Pin Definition......................36
Table 4-18: CompactPCI J5 Connector Pin Definition......................37

xii List of Tables
This page intentionally left blank.

Introduction 1
cPCI-6530
1 Introduction
1.1 Overview
The ADLINK cPCI-6530 Series is a 6U CompactPCI® processor
blade with soldered DDR3L-1600 ECC memory up to 8GB and
DDR3L-1600 ECC socket type memory up to 8GB. The ADLINK
cPCI-6530 features an Intel® Core™ i7/i5 processor with Mobile
Intel® QM87 Express Chipset.
The cPCI-6530 Series is a 6U CompactPCI blade in single-slot
(4HP) width form factor. Front panel I/O for the cPCI-6530V
includes 1x DVI-I, 2x GbE and 2x USB 3.0 ports, 1x USB 2.0 port,
1x DB-9 COM port and 1x PCI/XMC slot. The cPCI-6530 front
panel includes 2x GbE and 1x USB 3.0 port and 1x USB 2.0 port
and 2x PMC/XMC slots.
Graphics support is integrated on the CPU and supports 3 inde-
pendent displays when mated with selected rear transition mod-
ules (cPCI-R6700 and cPCI-R6500). Storage for both cPCI-6530V
and cPCI-6530 versions includes an mSATA slot and a SATA 7-pin
connector. The cPCI-6530V supports an additional SATA connec-
tor to support onboard 2.5" SATA drive or CFast adapter.
For expansion, both cPCI-6530 and cPCI-6530V are equipped
with one 64-bit/33, 66,133MHz PMC site or one PCIe x8 Gen 2
XMC site with rear I/O. The cPCI-6530 is equipped with one addi-
tional PMC/XMC slot supporting PCI 64-bit/33,66,133MHz PMC
site or one PCIe x8 Gen 2 XMC site.
Rear I/O signals to RTM include 2x GbE by Intel I210 LAN control-
lers, 1x DVI-I, 1x PCIe x4 (configurable to 4x PCIe x1), 3x SATA 3
Gb/s, and 6x USB 2.0., 5x GPIO, high definition audio, KB/MS,
and 2x serial ports (one supports Tx/Rx only). The PMC/XMC sig-
nals on the cPCI-6530 can also be routed to RTM.
The cPCI-6530 Series offers outstanding performance provided by
4th generation Intel® Core™ processor family, and is an ideal
solution for military, aerospace, transportation and other industrial
applications that require best value per watt computing power. The
ADLINK cPCI-6530 Series provides higher flexibility, supporting
operation in peripheral slots with CompactPCI bus communication
(Universal mode) and as a standalone computer if there is no CPU

2Introduction
blade in the host slot. Internet remote manageability includes IPMI
for system health monitoring over Internet and a GbE port on the
faceplate supports Intel® AMT 9.0 for remote monitoring.
1.2 Features
X6U CompactPCI blade in 4HP width form factor
XIntel® Core™ i7-4700EQ Processor (4 cores, 8 threads, 6M
cache, 2.4 GHz) and Mobile Intel® QM87 Express Chipset
XGraphics and memory controllers integrated in processor
XOne channel DDR3L-1600 soldered SDRAM with ECC up to
8GB and one channel DDR3L-1600 ECC socket memory up to
8GB
X64bit/66MHz CompactPCI Interface based on PCI specifica-
tions, universal V(I/O)
XSupports Universal mode operation as a slave in peripheral
slots and operation as a standalone computer if no CPU blade
in host slot
XOne 64-bit/33,66,133MHz PMC or PCIe x8 Gen2 XMC site on
cPCI-6530V with rear I/O; one additional PMC/XMC site on
cPCI-6530
XSupports IPMI over LAN for system health monitoring
XDVI-I port on front panel, additional DVI-I and eDP routed to
rear
XTwo PCIe Gigabit Ethernet egress ports supported by Intel
LAN controller on front panel, one supports Intel® AMT 9.0 by
Intel® Ethernet Controller I210 (PHY)
XTwo additional PCIe Gigabit Ethernet by Intel® Ethernet Con-
troller I210 routed to J2 (PICMG 2.16 compliant)
XAdditional two Gigabit Ethernet ports with selected rear transi-
tion module (cPCI-R6100 Series)
XHigh definition audio routed to RTM
XOnboard mSATA for SATA interface storage
XOptional onboard 2.5" SATA SSD or CFast storage on
cPCI-6530V
XOptional Atmel AT97SC3204 TPM support

Introduction 3
cPCI-6530
1.3 Package Contents
The cPCI-6530 is packaged with the following components. If any
of the following items are missing or damaged, retain the shipping
carton and packing material and contact the dealer for inspection.
Please obtain authorization before returning any product to
ADLINK. The packing contents of cPCI-6530 Series non-standard
configurations will vary depending on customer requests.
CPU module
XThe cPCI-6530 Series Processor Blade
ZCPU and memory specifications will differ depending on
options selected
ZThermal module is assembled on the board
XRJ-45 to DB-9 COM adapter cable (cPCI-6530V)
X2.5” HDD accessory pack (cPCI-6530V)
XmSATA accessory pack
XADLINK All-in-One DVD
XUser’s manual
Rear Transition Module
XDependent on the module selected
Optional Accessories
XDB-CFAST adapter board for CFast card assembly (Part
No. 91-37572-010E)
NOTE:
NOTE:
The contents of non-standard cPCI-6530 configurations may
vary depending on the customer’s requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.

4Introduction
This page intentionally left blank.

Specifications 5
cPCI-6530
2 Specifications
2.1 cPCI-6530 Processor Blade Specifications
CompactPCI®
Standards • PICMG® 2.0 CompactPCI® Rev. 3.0 • PICMG® 2.1 Hot Swap Specification Rev. 2.0
• PICMG® 2.9 System Management Rev. 1.0
• PICMG® 2.16 Packet Switching Backplane Rev. 1.0
Mechanical • Standard 6U CompactPCI®
• Board size: 233mm x 160mm
• Single slot (4HP, 20.32mm)
• CompactPCI® connectors: J1, J2, J3, J4, J5
Processor • Intel® Core™ i7-4700EQ Processor, 2.4 GHz (3.4 GHz Turbo),
6MB LLC cache, TDP 45W
• Intel® Core™ i5-4402E Processor, 1.6 GHz (2.7 GHz Turbo),
3MB LLC cache, TDP 25W
• Passive heatsink
Chipset • Mobile Intel® QM87 Express Chipset
Memory • Dual channel DDR3L-1600 ECC memory, max. support 16GB
• One channel onboard soldered DDR3L-1600 ECC up to 8GB
• One channel socket DDR3L-1600 ECC up to 8GB
CompactPCI
Bus • PCI 64-bit/66MHz; 3.3V, 5V universal V I/O • Supports operation in system slot as master or in peripheral
slot with connectivity to CompactPCI bus (Universal mode)
• Supports operation in peripheral slot as standalone CPU
board when no host blade in host slot
Gigabit
Ethernet • One PCIe x1 Intel® I217 GbE PHY and three PCIe x1 Intel® I210 Gigabit Ethernet controllers
• Two egress 10/100/1000BASE-T ports on front panel, one
supporting Intel® AMT 9.0 by I217 controller
• Two egress 10/100/1000BASE-T ports routed to rear
transition module
Graphics • Integrated on Intel® Core™ processor, Intel® HD Graphics
4600
• One DVI-I port on front panel, one DVI, eDP routed to J3 & J5
(RTM)
• Up to three independent display with selected rear transition
module (cPCI-R6700 & cPCI-R6500)
Table 2-1: cPCI-6530 Processor Blade Specifications

6 Specifications
Serial Ports • Up to three serial ports
• One RS-232/422/485 serial port on front panel (cPCI-6530V)
• Up to two RS-232/422/485 COM port routed to RTM
USB 2.0 • One USB 2.0 port on front panel
• Up to six USB 2.0 ports routed to rear transition module
USB 3.0 • One USB 3.0 for cPCI-6530 version, additional one USB 3.0
for cPCI-6530V version
PMC/XMC • One 64-bit/33,66,133 MHz PMC site or PCIe x8 Gen 2 XMC
site for cPCI-6530V version with rear I/O
• Two 64-bit/33,66,133 MHz PMC sites or PCIe x8 Gen 2 XMC
sites on cPCI-6530 version
Audio • High definition audio routed to rear
TPM Atmel AT97SC3204 TPM (upon request) supporting:
• Over/Under voltage detection
• Low/High frequency sensor/filter
• Reset filter
• Memory encryption/decryption
Storage
Interfaces1• One mSATA slot
• One onboard 2.5” SATA connector supporting SATA 6Gb/s
drive on cPCI-6530V
• Optional CFast socket by adapter board on cPCI-6530
(space shared with 2.5” SATA drive)
• One SATA 7-pin 3Gb/s connector onboard
• Three SATA 3Gb/s channels routed to RTM
BIOS • AMI® EFI BIOS, 64Mbit SPI flash memory, supports
Configurable TDP (can be set as Nominal and Down)
Faceplate I/O cPCI-6530V (4HP)
• 2x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port
• 2x USB 3.0 ports
• 1x USB 2.0 port
• 1x RJ-45 serial port
• 1x PMC/XMC slot
cPCI-6530 (4HP)
• 2x 10/100/1000BASE-T Ethernet ports
• 1x USB 3.0 ports
• 1x USB 2.0 port
• 2x PMC/XMC slots
Table 2-1: cPCI-6530 Processor Blade Specifications

Specifications 7
cPCI-6530
1. The storage device limits the operational vibration tolerance. When
the application requires higher specification for anti-vibration, it is
recommended to use a flash storage device.
2. ADLINK-certified thermal design. The thermal performance is depen-
dent on the chassis cooling design. Sufficient forced air-flow is required.
Temperature limits of optional mass storage devices may also affect the
thermal specification.
OS
Compatibility • Microsoft Windows 7 32/64-bit • Microsoft Windows 8 32/64-bit
• Red Hat Enterprise Linux 6.4, 64-bit
• Fedora 14, 32-bit
• VxWorks 6.9
• Other OS support upon request
Environmental • Operating Temperature (with forced air flow)2:
Standard: -20°C to +70°C
Extreme temperature: -40°C to +85°C (for Intel®
Core™ i5 and Intel® Core™ i7-4700EQ processor with
cTDP down to 37W and forced air flow)
• Storage Temperature: -50°C to 100°C
• Humidity: 95% @60°C non-condensing
• Shock: 20G peak-to-peak, 11ms duration, non-operating
•Vibration
3: 2Grms, 5-500Hz, each axis, operating (w/o hard
drive)
EMI • CE EN55022
• FCC Class A
Table 2-1: cPCI-6530 Processor Blade Specifications

8 Specifications
2.2 Block Diagrams
cPCI-6530 Blade
Figure 2-1: cPCI-6530 Blade Functional Block Diagram
VGA
Front Panel
DMI
J1/J2 J3/J4/J5
PCIe x4
PI7C9X130
mSATA
PCIe x4
Intel
I217
PCIe x1
PCIe x1
6x USB 2.0
3x SATA 3G
HDA
5x GPIO
RTC
PCIe x4
SIO
LPC
KB/MS
COM2/3
COM6
BMC
COM1
SPI
XMC2
DDR3 1067/1333
IPMB 0/1
FDI
GbE2 GbE1
DVI-I
USB1 USB2 USB3 COM1
2.5” HDD
SATA2
PMC2
Intel®
Haswell
Soldered w/ ECC, max. 8GB
ECC SO-CDIMM, max. 8GB
PCI 64b/133M
PCIe x1
BIOS
Lynx Point PCH
PCIe to PCI-
X
Intel
I210
PCI 64b/66M
2x
USB 3.0
CFast
SATA0
TPM
7-pin
SATA1
TMDS/
DP-B
eDP
USB 2.0DVI
PMC1 XMC1
PCIe X8
Intel
I210
GbE 3/4
PCIe x1
Intel
I210
VGA
PC Ie S wi tc h
PCIe X8
PCIe X8
DP to
VGA
Rear I/O