ADLINK Technology cPCI-3840 Series User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

Advance Technologies; Automate the World.
Manual Rev. 2.01
Revision Date: December 18, 2006
Part No: 50-15034-100
cPCI-3840 Series
3U CompactPCI Pentium(R) M
CPU Module
User’s Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Copyright 2005 ADLINK TECHNOLOGY INC.
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Getting Service from ADLINK
Customer Satisfaction is top priority for ADLINK Technology Inc.
Please contact us should you require any service or assistance.
ADLINK TECHNOLOGY INC.
Web Site: http://www.adlinktech.com
Sales & Service: [email protected]
TEL: [phone]
FAX: [phone]
Address: 9F, No. 166, Jian Yi Road, Chungho City,
Taipei, 235 Taiwan
Please email or FAX this completed service form for prompt and
satisfactory service.
Company Information
Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX:
Web Site
Product Information
Product Model
Environment
OS:
M/B: CPU:
Chipset: Bios:
Please give a detailed description of the problem(s):
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents i
Table of Contents
List of Tables.......................................................................... iii
List of Figures ........................................................................ iv
1 Introduction ........................................................................ 1
1.1 Features............................................................................... 4
1.2 Main Functions .................................................................... 5
CompactPCI Bus Interface ............................................. 5
IDE Interfaces ................................................................. 5
Gigabit Ethernet Ports .................................................... 6
Universal Serial Bus (USB) ............................................. 6
Serial I/O ......................................................................... 6
SATA .............................................................................. 6
Watchdog Timer ............................................................. 7
Hardware Monitoring ...................................................... 7
Operating System Support ............................................. 7
1.3 Specifications....................................................................... 8
Specifications of the cPCI-3840 CPU Module ................ 8
cPCI-R3840 RTM Specifications .................................. 11
I/O Connectivity Table ................................................. 12
1.4 Unpacking Checklist .......................................................... 12
2 Jumpers and Connectors................................................ 15
2.1 cPCI-3840 Board Outline................................................... 16
2.2 cPCI-3840 Connector Pin Assignments ............................ 17
USB Connectors ........................................................... 17
Ethernet (RJ-45) Connector .......................................... 17
VGA Connector ............................................................. 18
RS-232 DB-9 Serial Port Connector (COM1) ............... 19
SATA Connector .......................................................... 19
IDE Connector .............................................................. 20
CompactFlash Connector ........................................... 21
General Purpose LED Definitions ................................. 21
CompactPCI J2 Pin Assignment ................................... 22
CompactPCI J3 Pin Assignment ................................... 23
2.3 Switch and Jumper Setting ................................................ 23
Reset Button (SW1) ...................................................... 24
CF Master/Slave Setting (CN5) .................................... 24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ii Table of Contents
Clear CMOS (JP2) ........................................................ 24
2.4 cPCI-R3840 RTM Board Outline........................................ 26
2.5 cPCI-R3840 RTM Connector Pin Assignments ................. 28
DVI Connector .............................................................. 28
cPCI-R3840 RJ2 Pin Assignment ................................. 29
3 Getting Started .................................................................. 31
3.1 Installing the CPU .............................................................. 32
3.2 Memory Module Installation ............................................... 33
Installing the First Memory Module ............................... 33
Removing the CPU Core Module ................................. 34
Installing the Second Memory Module .......................... 35
3.3 CF Card Installation ........................................................... 36
3.4 CPU Core Module Installation............................................ 36
3.5 Heat Sink Installation ......................................................... 36
3.6 2.5” HDD Installation.......................................................... 40
3.7 cPCI-3840 CPU Module Installation .................................. 42
3.8 RTM Installation ................................................................. 43
4 Windows Driver Installation............................................. 45
4.1 Chipset Drivers Installation ................................................ 46
4.2 VGA Driver Installation....................................................... 46
4.3 LAN Driver Installation ....................................................... 47
4.4 Audio Codec Driver Installation.......................................... 47
5 Utilities ............................................................................... 49
5.1 Watchdog Timer................................................................. 49
WDT Overview .............................................................. 49
Configuration Registers ................................................ 50
GPIO Control Registers ................................................ 52
WDT Programming Procedure ..................................... 53
Utilities .......................................................................... 54
5.2 Intel® Preboot Execution Environment (PXE) ................... 54
Warranty Policy ..................................................................... 55
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

List of Tables iii
List of Tables
Table 1-1: Mean Power Consumption ..................................... 11
Table 1-2: I/O Connectivity ...................................................... 12
Table 2-1: Jumper and Connector Locations ........................... 16
Table 2-2: Ethernet LED Status ............................................... 18
Table 2-3: Switches and Jumpers ........................................... 23
Table 2-4: CN5 CF Master/Slave Setting ................................ 24
Table 2-5: JP2 Clear CMOS .................................................... 25
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

iv List of Figures
List of Figures
Figure 1-1: cPCI-3840 Architecture.............................................. 3
Figure 2-1: cPCI-3840 Front View and Top View....................... 16
Figure 2-2: cPCI-3840 Carrier Board Top View ......................... 16
Figure 2-3: cPCI-R3840 Front View and Top View .................... 26
Figure 2-4: Side View of cPCI-R3840 ........................................ 27
Figure 3-1: CPU Installation. ...................................................... 32
Figure 3-2: Memory Module Installation, Pt 1. ........................... 33
Figure 3-3: CPU Core Module Removal. ................................... 34
Figure 3-4: Memory Module Installation, Pt. 2. .......................... 35
Figure 3-5: Thermal Pad ............................................................ 37
Figure 3-6: Heat Sink Fitting ...................................................... 38
Figure 3-7: Heat Sink Screws .................................................... 39
Figure 3-8: HDD and Mounting Bracket Installation................... 41
Figure 5-1: WDT Overview......................................................... 49
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 1
1 Introduction
The cPCI-3840 is designed to be a high performance dual slot 3U
CompactPCI CPU Module. It features a single Intel® Pentium® M
processor with 1MB L2 cache in a 478-pin Micro-FCPGA package,
and is validated with the Intel® 855GME chipset that supports
144-bit wide PC2100/2700 (266/333 MHz) registered ECC DDR
DIMM up to a maximum of 2GB. The cPCI-3840 also features the
Intel® 82546EB Dual Port Gigabit Ethernet Controller and sup-
ports one ATA33/66/100 IDE channel, one Compact Flash type I/II
connector, and 2 ports SATA for high volume storage applications.
The Intel® Pentium® M is a high performance, low power mobile
processor with several micro-architecture enhancements over
existing Intel Mobile processors. Intel® Pentium® M supports
Intel® Architecture with Dynamic Execution, on-die primary 32-KB
instruction cache and 32-KB write-back data cache, on-die 1-MB
second level cache with Advanced Transfer Cache Architecture,
Advanced Branch Prediction and Data Prefetch Logic, Streaming
SIMD Extensions 2 (SSE2), a 400-MHz Source-Synchronous pro-
cessor system bus, and Advanced Power Management features
including Enhanced Intel® SpeedStep® technology.
The Intel® Pentium® M processor system bus supports AGTL+
bus driver technology with integrated GTL termination resistors,
(gated AGTL+ receivers for reduced power), 32-bit AGTL+ bus
addressing (no support for 36-bit address extension), 400MT/s
BPSB (100MHz), 2X address, 4X data, and 12 deep in-order
queues.
The Intel® 855GME chipset north bridge contains a Graphics
Memory Controller Hub (GMCH) component for embedded plat-
forms. The GMCH provides the processor interface, system mem-
ory interface (DDR SDRAM), hub interface, CRT, and a DVO
interface. The GMCH also supports 128-MB, 256-MB, and 512-
MB memory technologies, 16 simultaneous open pages, and 64-
bit data interface (72-bit with ECC).
Furthermore, the 855GME features a 350 MHz integrated 24bit
RAMDAC supporting analog display with pixel resolution up to
1600x1200 at 85Hz and 2048x1536 at 75Hz, dual independent
display pipe supporting concurrent or simultaneous display on
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2Introduction
each display device, digital video output with 165 MHz output
clock on a 12-bit interface via one port DVO supporting pixel reso-
lution up to 1600x1200 at 85Hz, Tri-view support through a LFP
interface, DVO and CRT, and a maximum of 64 MB of dynamic
video memory allocation.
The cPCI-3840 is equipped with the highly integrated, multi-func-
tional Intel® 6300ESB I/O Controller Hub that provides the inter-
face to the PCI bus, PCIX bus, and integrates miscellaneous I/O
functions for legacy devices. The 855GMEand 6300ESB commu-
nicate over a dedicated hub interface (HI-1.5). The 6300ESB’s
functions and capabilities include an 8-Bit Hub Interface, a PCI-X
bus which supports 64-bit/66MHz operations, a PCI Local Bus
which supports 32-bit/33MHz operations, an integrated IDE con-
troller which supports Ultra ATA100/66/33, integrated Serial ATA
Host Controllers, two USB UHCI host interfaces with support for 4
USB ports, ACPI Power Management Logic Support, an
enhanced DMA Controller, Interrupt Controller, Timer Functions,
System Management Bus (SMBus) Specification v2.0 with support
for I2C devices, Low Pin Count (LPC) interface, and a Watchdog
Timer.
Please refer to the following block diagram for the cPCI-3840
architecture.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 3
Figure 1-1: cPCI-3840 Architecture
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4Introduction
1.1 Features
The features of the cPCI-3840 are as follows:
XDesigned for Micro-FCPGA478/ Micro-FCBGA479 Pen-
tium-M 400MHz PSB processor with 1MB L2 cache
XSupports up to two double-sided 200-pin SODIMMs with up
to a total of 2GB of RAM with unbuffered PC2100/PC2700
DDR-SDRAM with or without ECC (64-bit data interface
with ECC SODIMM, 72-bit with ECC SODIMM)
XOne VGA output supports resolution up to 1600 x 1200 at
85Hz and up to 2048 x 1536 at 75Hz.
XDigital display interface supports one port DVO with
165MHz output clock on each 12-bit interface.
XHardware Monitoring for system voltages and CPU temper-
ature.
XSupports analog display (RGB) and digital display (DVO).
XUp to 64MB of dynamic video memory allocation
XSupports Intel® Architecture with Dynamic Execution
XCPU temperature monitoring.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 5
1.2 Main Functions
The cPCI-3840 CPU Module is designed for the Intel® Pentium®
M and Celeron® M Processors. The standard cPCI-3840 CPU
Module comes with a CPU socket which can be installed with a
Micro-FC-PGA package CPU, including the following options:
XPentium® M 1.3GHz, 1.4GHz, 1.5GHz and 1.6GHz
XCeleron® M 1.3GHz
The Low Voltage (LV) or Ultra Low Voltage (ULV) versions of the
Pentium® M or Celeron® M Processors in the Micro-FCBGA2
package can also be mounted on the cPCI-3840 CPU Module.
However, Micro-FCBGA package support is reserved for OEM
programs only. The possible CPU options include:
XLV Pentium® M 1.1, 1.2, 1.3GHz
XULV Celeron® M 600MHz
CompactPCI Bus Interface
The Intel® 6300ESB south bridge chipset supports one PCI
33MHz / 32bits interface compliant with the PCI Local Bus Specifi-
cation, Revision 2.2. The throughput of this PCI bus interface is
132 MB/s, and it supports 44 bit addressing using DAC protocol.
The 6300ESB also supports one PCIX 66MHz / 64-bits interface
which is compliant with the PCIX Bus specification, revision 1.0
and is also compliant with the PCI Local Bus Specification, Revi-
sion 2.2. The throughput of this PCIX bus is up to 480 MB/s. It
supports 64-bit addressing on PCI-X using DAC protocol.
IDE Interfaces
The cPCI-3840 supports dual Ultra ATA33/66/100 IDE channels.
The primary IDE is implemented to CompactFlash (CF) interface
and the secondary IDE is connected to a 40-pin slim-type IDE con-
nector. The 6300ESB IDE controller supports both legacy mode
and native mode IDE interfaces. In native mode, the IDE controller
is a fully PCI compliant software interface and does not use any
legacy I/O or interrupt resources. Note that for Ultra ATA100/66
mode operations, the proper cables must be installed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6Introduction
Gigabit Ethernet Ports
The cPCI-3840 has two 10/100/1000Mbps Ethernet (GbE) ports.
Every port is assigned a unique static MAC Address. The BIOS
menu can be setup to disable or enable these two LAN ports.
The onboard Intel® 82546EB Dual Port Gigabit Ethernet Control-
ler provides two Ethernet ports. The 82546EB is implemented on
the 64-bit/66-MHz PCI-X bus to achieve the full communication.
The 82546EB supports IEEE 802.3x compliant flow control and
IEEE 802.3ab compliant 10/100/1000 Mbps auto-negotiation. One
port is connected to the front panel and the other to rear panel via
J2 (see Chapter 2, Jumpers and Connectors).
Universal Serial Bus (USB)
The cPCI-3840 employs one EHCI USB 2.0 Host Controller that
compliments the UHCI interfaces on the south bridge for a total of
five USB ports. Two USB ports are on the front panel, one is inter-
nal, and the remaining two are connected to the rear panel. Over-
current detection on all USB ports is supported. USB legacy
devices, such as keyboard, mouse and floppy drive are supported
and can be enabled/disabled in BIOS options. In addition, USB
devices boot feature is also implemented on all USB ports.
Serial I/O
The serial port consists of a UART which supports all functions of
a standard 16550 UART, including hardware flow control interface.
The UART performs serial-to-parallel conversion on data charac-
ters received from a peripheral device or a modem and parallel-to-
serial conversion on data characters received from the processor.
SATA
The 6300ESB I/O Controller Hub SATA controller features two
sets of interface signals that may be independently enabled, tri-
stated or driven low. Each interface is supported by an indepen-
dent DMA controller. The controller interacts with an attached
mass storage device through a register interface that is equivalent
to that presented by a traditional IDE host adapter. The host soft-
ware follows existing standards and conventions when accessing
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 7
the register interface and follows standard command protocol con-
ventions.
Watchdog Timer
The cPCI-3840 implements a 2-stage Watchdog Timer (WDT) that
is embedded on the 6300ESB and can be enabled/disabled in
BIOS options. The WatchDog Timer supports selectable pres-
caler: approximately 1 MHz (1 us to 1 s) and approximately 1 KHz
(1 ms to 10 min). The 2-stage WDT mode performs the following
steps when the programmed time is up. First, it generates IRQ,
SMI, or SCI interrupts. Second, it drives WDT_OUT# low and
resets the cPCI-3840.
Hardware Monitoring
The onboard Winbond W83L784R Hardware Monitor tracks criti-
cal hardware parameters, including system and CPU voltages and
system temperature. All hardware health status can be accessed
in the BIOS options menu and using run-time utilities. In addition,
once the preset thresholds of the hardware conditions are met, the
W83L784R will alert the system or reset the entire system in criti-
cal situations. The The onboard Analog Devices ADM1032 is an
ACPI compliant two-channel digital thermometer and under/over
temperature alarm that allows the cPCI-3840 to be programmable
for under/over temperature limits.
Operating System Support
The cPCI-3840 is compatible with Windows XP/2000/NT/Server
2003, and Linux Red Hat 9.0. The device drivers for Windows are
included in the ADLINK All-in-One CD. For other Linux support
and VxWorks BSP, please contact ADLINK.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

8Introduction
1.3 Specifications
Specifications of the cPCI-3840 CPU Module
CompactPCI Compliancy
XPCI Rev. 2.1 compliant
XPICMG 2.0 CompactPCI Rev. 3.0 Compliant
XPICMG 2.1 CompactPCI Hot Swap Specification R2.0 Com-
pliant
Form Factor
XStandard 3U CompactPCI: 160 mm x 100 mm board size
XDual Slot, 8TE/HP width
CPU/Cache
XSingle Intel® Pentium® M 1.3/1.4/1.5/1.6 GHz or Celeron M
1.3 GHz Processors with Micro-FC-PGA package
X1MB on die L2 cache, 400MHz FSB
Chipset
XIntel® 855GME Graphic Memory Controller Hub (GMCH)
XIntel® 6300ESB I/O Hub Controller
Host Memory
XTwo SODIMM sockets, 2GB maximum
XSupports DDR266/333 SDRAM with ECC capability
BIOS
XPhoenix/Award Plug and Play BIOS with 4MB Flash ROM
XSystem BIOS flash, SST 49LF004A, in 4MB capacity, is
compatible with Intel® 82802 Firmware Hub (FWH) device.
XBIOS write protection, provides anti-virus capability
XBootable from USB storage devices including USB-Floppy,
USB-ZIP, USB-CD-ROM, and USB-HDD.
XOn-board Ethernet ports can be disabled using BIOS set-
tings. BIOS write-protect function can be enabled/disabled
in the BIOS options menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 9
CompactPCI Bus Controller
XIntel® 6300ESB PCI Bus Interface Controller
XPCI Local Bus Specification Revision 2.2 compaliant
XSupport 32-bit/33MHz
Graphic
XIntegrated in 855GME Graphics Memory Control Hub.
XShared memory, up to 32MB
XDual Channel Display
XFront Panel analog VGA DB-15 connector is available
Gigabit Ethernet
XDual 10/100/1000bps Gigabit Ethernet ports provided by
Intel® 82546EB Ethernet controller on local 66MHz/64-bit
PCI-X bus; front panel and RTM rear access
Onboard Peripherals
XIntegrated in Intel® 6300ESB south bridge
XBus master IDE controller supports ultra ATA-100 interface
XPrimary IDE on SBC with 44-pin IDE connector. A 2.5” IDE
HDD can be mounted
XAll USB ports are USB Spec Rev. 2.0 compliant
XUSB 1, 2 are on the front panel
XUSB 3 is on the RTM Panel
XUSB ports support 0.5A@5V for peripherals with individual
over-current protection
XSupports DB-9 COM1 Serial Port on the front panel and DB-
9 COM2 on the RTM
XSupports one RJ-45 GbE port on the front panel and one
RJ-45 GbE port on RTM
XSupports one SATA port and external power connector on
the front panel
XSpeaker out and MIC IN ports provided on the front panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

10 Introduction
Front Panel LED Indicators and Reset
X4 LEDs on the front panel including storage access LED
(red), Power LED (green), General Purpose Status (Blue),
and Watchdog timer LED (Yellow)
XFlush tact switch for system reset
Real -Time Clock and Nonvolatile Memory
XBuilt-in Intel® 6300ESB south bridge RTC
XBattery-backed memory used for BIOS configurationm
XSeparate 3V coin cell CR2032 battery used for RTC and
nonvolatile memory
Environment
XOperating ambient temperature: -5 to 55 °C
XStorage temperature: -20 to 80 °C
XHumidity: 5% to 95% non-condensed
XShock: 15G peak-to-peak, 11ms duration, non-operation
XVibration:
ZNon-operation: 1.88Grms, 5-500Hz, each axis
ZOperation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD
Safety Certificate and Test
XCE, FCC Class B
XAll plastic material, PCB and batteries used are UL-94V0
certified
XDesigned for NEBS 3.0 requirements
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 11
Power Requirements
cPCI-R3840 RTM Specifications
The cPCI-R3840 is a rear transition module designed for the cPCI-
3840. It comes with one LAN port, one USB port, one DVI connec-
tor, and one DB-9 serial port.
Form Factor
XStandard 3U CompactPCI rear I/O
X2 Slot (8TE/HP, 40.64 mm) wide
Faceplate I/O Connectors
XOne GbE ports on RJ-45 connector
XOne DVI connector
XOne COM2 port on DB-9 connector
XOne USB port
Full Loading +5V +3.3V Total Power
Pentium® M
1.6GHz CPU,
512MB x 2 DDR, 40G HD
3.16A 2.39A 23.6878 W
Pentium® M
1.1GHz CPU,
512MB x 2 DDR, 40G HD
1.875A 1.746A 15.1368 W
Celeron M
1.3GHz CPU,
512MB x 2 DDR, 40G HD
2.44A 1.683A 17.7539 W
Dothan
1.8GHz CPU,
512MB x 2 DDR, 40G HD
3.334A 1.524A 21.6992 W
Table 1-1: Mean Power Consumption
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com