Allsteel Access User manual

INSTRUCTIONS
Access™

Use these easy adjustments to access
your personal comfort zone.
Vertical Lumbar Adjustment
Move adjustment handles up or down to fit your
personal preference. Adjustments on the mesh
chair can be made independently for the right
and left sides.
Arm Height / Depth / Pivot Adjustment
Push the arm trigger to adjust the height,
and release to lock the arm to desired position.
Multi-adjustable arm models: Push or pull
the armpad forward and backward to adjust
depth and push the front of the armpad
in and out to pivot.
Upright Tilt Lock (Synchro-Tilt Models)
Pull the telescoping knob out and turn
counterclockwise to lock tilt position. Lean back
to activate. Turn the knob clockwise and lean
back to unlock.
Seat Depth Adjustment
Lift and hold the lever as you push the
seat forward and backward.

Arm Width Adjustment
Push down on lever and adjust arm to desired width,
then pull lever back up to locked position.
Seat Height Adjustment
To raise the seat, lift your weight off the seat and pull up
on the lever. To lower the seat, lift up on the lever while
you are seated.
Tilt Tension (Synchro-Tilt Models)
Pull telescoping knob out and turn
clockwise to increase tension,
counterclockwise to reduce tension.
Quick-Adjust Back Height
Upholstered models: Lift up on seat
back to adjust to one of six preset
positions or all the way up to release
and return to lowest position.
Upright Tilt Lock (Basic Synchro-Tilt Models)
Push the lever in while the seat and back are upright to
lock into upright work position. Pull lever out to unlock.
Tilt Tension (Basic Synchro-Tilt Models)
Turn the knob counterclockwise to decrease tension,
clockwise to increase tension.
Tilt TensionUpright Tilt Lock

User information:
Installers do not remove.
Periodically inspect mechanisms for loose, broken, or missing parts.
If any missing parts or loose or broken mechanisms are found, remove
the chair from use until repairs are made using factory-authorized parts.
Find out more about Allsteel products at allsteeloffice.com.
Allsteel Inc.
Muscatine, Iowa 52761-5257
allsteeloffice.com
Part # 442-2000 (07/12) Printed in USA