Allsteel Quip User manual

User information:
Installers do not remove.
Periodically inspect mechanisms for loose, broken, or missing parts.
If any missing parts or loose or broken mechanisms are found, remove
the chair from use until repairs are made using factory-authorized parts.
Find out more about Allsteel products at allsteeloffice.com.
Allsteel Inc.
Muscatine, Iowa 52761-5257
allsteeloffice.com
Part # 442-0090 (10/16) Printed in USA
INSTRUCTIONS
Quip™

Use these easy adjustments to
optimize ergonomics and comfort.
Lumbar Support
Lumbar support has been engineered
into the back. An external lumbar
support is available. This option can
be added at any time.
Seat Depth
To change the seat depth, pull up on the
lever as you move the seat forward or
backward. Release the lever to lock the seat
in place.
Arm Adjustments
Push the arm trigger to adjust the height, and
release to lock the arm to desired position. Push
or pull the armpad in and out to adjust width.
Push or pull the armpad forward and backward to
adjust depth.
Upright Tilt Lock
Push the lever in while the seat and back are
upright to lock into upright work position. Pull
lever out to unlock.
Tilt Tension
Turn the knob clockwise to increase tension,
counter-clockwise to reduce tension.
Seat Height
To raise the seat, lift your weight off the seat
cushion and pull up on the lever. To lower the
seat, lift up on the lever while you are seated.
Release the lever when the seat reaches your
desired height.