Anova Mixx Recycled MIX2925R User manual

1
(24) 1/4”
Nylock Nuts
(24) 1/4”
Fla t Washers
(4) Glides
ASSEMBLY INSTRUCTIONS
MIX2925R - Mixx Recycled Plastic 34” Square Table
MIX2925T - Mixx Thermory® 34” Square Table
MIX2945R - Mixx Recycled Plastic 34” x 72” Table
MIX2945T - Mixx Thermory® 34” x 72” Table
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•Ratchet with 7/16” s ocket
TABLE COMPONENTS:
ASSEMBLY HARDWARE: All hardware is stainless steel.
ASSEMBLY:
(1) Table Top
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Assemble the table over the shipping packaging orpadded work area to avoid scratching the product.
NOTE: Before assembling the nuts to the PEM® studs, it is recommended that a light oil or petroleum jelly be
applied to the screw threads.
The assembly is a two-person operation.
(4) Table Legs
OR
34” x 72” table shown in Thermory.
34” square table shown in mahogany recycled plastic.

2
Gli de
Table Leg
Packing cardboard or
other s oft work surface
Rivet Nut
5. Insert one 1/4” flat washer and one 1/4” Nylock nut per each
PEM® stud.
Table Top
Nylock Nut
Fla t
Wa sher
4. While leaving the pre-assembled table top upside down on the
padded work area,slide each leg down the slots of each cornerof
the table top as shown.
Table Leg
3. Locate the hardware pack included with the product. Hand-screw
each glide into the rivet nut at the base of each leg.
PEM® Stud
6. Use a ratchet with a 7/16” socket to fully tighten each 1/4”
Nylock nut. The aprons are adjustable and should alignwith the
legs.
7/17/2019 Copyright 2019 ANOVA®Manufactured in the U.S.
7. Carefully stand the table up right.
8. After two weeks, retighten all the hardware.
NOTE: Please contact Customer Care at 1-866-797-1761 to receive assistance in placing a replacement part order.
Apron
Apron