Anova Tuscany T2247R User manual

1
Assembly Instructions
Tuscany 36” Bar Height Tables
T2247R –Recycled Plastic Table
T2247T –Thermory® Table
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•#3 Screwdriver
ASSEMBLY HARDWARE: All hardware is stainless steel.
ASSEMBLY:
The assembly is a one-person operation.
1. Inspect the shipping container contents for damage
and to determine that all components and hardware
are present.
2. Assemble the table over the shipping packaging or
padded work area to avoid scratching the product.
Note: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screw threads.
3. Locate the table top and place it on the work
surface with the table top supports oriented upward.
TABLE COMPONENTS:
Recycled Plastic Table
Thermory Table
(1) Table Top
(2) Legs
(8) ¼” – 20 x ½” Thread Cutting, Pan Head
Phillips Screws
(8) ¼” Flat Washers
(4) Leg Leveling Feet
Table Top

2
4. Locate one of the table legs. Position the leg so
that the tab holes align with the table support holes
inside on both ends. Place a 1/4” flat washer on a
1/4”-20 x 1/2” thread cutting pan head Phillips screw.
Insert a screw with washer into each tab and tighten
using a #3 screwdriver.
5. Install the second leg in the same manner.
6. Adjust the leveling feet on the legs as needed.
¼”-20 x ½” Thread Cutting Pan
Head Phillips Screw
Legs
¼” Flat Washer
NOTE: Please contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.
7/31/2019Copyright 2019 ANOVA® Manufactured in the U.S.
¼-20 x ½” Thread
Cutting Pan Head
Phillips Screw
Legs
¼” Flat Washer