Anova T2237R User manual

1
Assembly Instructions
Tuscany 36” Bristro Tables
T2237R–Recycled Plastic Table
T2237T– Thermory® Table
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•5/32” Hex Drive
ASSEMBLY HARDWARE: All hardware is stainless steel.
ASSEMBLY:
The assembly is a one-person operation.
l. Inspect the shipping container contents for
damage and to determine that all components and
hardware are present
2. Assemble the table over the shipping
packaging or padded work area to avoid
scratching the product.
Note: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screw threads.
3. Locate the table top and place it on the work
surface with the table top supports oriented
upward.
TABLE COMPONENTS:
Recycled Plastic Table
Thermory Table
(2) Legs
(1) Table Top
(8) ¼” – 20 x ¾” Button
Head Cap Screws
(8) ¼” Split Locking
Washers
(4) Leg Leveling Feet
Table Top
(8) ¼” Flat Washers

2
4. Locate one of the table legs. Position
the leg so that the tab holes align with the
table support holes inside on both ends.
Place a ¼” split locking washer followed by
a ¼” flat washer on a 1/4”-20 x ¾” button
head cap screw. Insert a screw with washer
into each tab and tighten using a 5/32” hex
drive.
NOTE: Please contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.
3/25/2019 Copyright 2021 ANOVA® Manufactured in the U.S.
Fasteners
Table Top
Legs
Pre-installed rivet nut
¼” Flat washer
¼” Split locking washer
¼”- 20 x ¾” Button
Head Screw