Anova T2237R User manual

1
Assembly Instructions
Tuscany 36” Bristro Tables
T2237R–Recycled Plastic Table
T2237T–Thermory® Table
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•#3 Screwdriver
ASSEMBLY HARDWARE: All hardware is stainless steel.
ASSEMBLY:
The assembly is a one-person operation.
l. Inspect the shipping container contents for damage and to
determine that all components and hardware are present
2. Assemble the table over the shipping packaging or padded
work area to avoidscratching the product.
Note: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied to
the screwthreads.
3. Locate the table topand place it on the work surface with
the table top supports oriented upward.
TABLE COMPONENTS:
Recycl ed Plastic Table
The rmory Table
(2) Legs
(1) Table Top
(8) ¼” – 20 x ½” Thread Cutting,
Pan Head Phillips Screws
(8) ¼” Flat Washers
(4) Leg LevelingFeet
Table Top

2
4. Locate one of the table legs. Position the leg so
that the tabholes align with the table support holes
inside on both ends. Place a 1/4” flat washer on a
1/4”-20 x 1/2” thread cutting pan head Phillips screw.
Insert a screwwith washer into each taband tighten
using a #3 screwdriver.
5. Install the secondleg in the same manner.
6. Adjust the leveling feeton the legs as needed.
¼”-20 x ½” Thread Cutting
Pan Head Phillips Screws
Legs
¼” Flat Washer
Table Top
NOTE: Plea se contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.
7/31/2019 Copyright 2019 ANOVA® Manufactured in the U.S.
¼”-20x1/2” Thread Cutting Pan Head
Phillips Screws
Legs
¼” Flat Washer