Anova T2267R User manual

1
Assembly Instructions
Tuscany 42” Tables
T2267R–Recycled PlasticTable
T2267T–Thermory® Table
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•#3 Screwdriver
ASSEMBLY HARDWARE: All hardware is stainless steel.
ASSEMBLY:
The assembly is a one-person operation.
1. Inspect the shipping container contents for damage
and to determine that all components and hardware
are present.
2. Assemble the table over the shipping packaging or
padded work area to avoid scratching the product.
Note: Before assembling the nuts tothe bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screwthreads.
3. Locate the table top and place it on the work
surface withthe table top supports oriented upward.
TABLE COMPONENTS:
Thermory Ta ble
Recycled Plastic
(1) Ta ble Top
(2) Legs
(8) ¼”-20 x ½” Thread Cutting, Pan
Hea d Phillips Screws
(8) ¼” Flat Washers
(4) Leg Leveling Feet
Table Top

2
7/31/2019Copyright 2019 ANOVA®Manufactured in the U.S.
4. Locate one of the table legs.Position the leg so
that the tabholes align with the table supportholes
inside on both ends. Place a 1/4” flat washer on a
1/4”-20 x 1/2” thread cutting pan head Phillips screw.
Insert a screwwith washer into each taband tighten
using a #3 screwdriver.
5. Install the next leg in the same manner.
6. Adjust the leveling feeton the legs as needed.
Note: Table is federally ADA-compliant.
¼”-20 x ½” Thread Cutting Pan
Hea d Phillips Screw
Legs
¼” Fl a t Washer
Table Top
¼”-20 x ½” Thread Cutting
Pan Head Phillips Screw
NOTE: Plea se contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.
Legs
¼” Fl a t Washer
Table Top