Network
RJ11 RJ45
TCP/IP
USB/Power
Internet Comm Mode
M/Back
* Go to Network\Internet menu to select Ethernet
* Go to Network\Comm Mode to select Server or Client mode
* Go to Network menu to setup Ethernet parameter according to your network settings
* Ping the IP address of Device from the management computer. Make sure the
Ping is successful
Go to Network menu
Go to Internet menu to
set up WAN mode as
“Ethernet” and input the
DNS server IP address
WAN mode
DNS 8 88 8
Comm mode
Go to Comm Mode menu to select
Server or Client mode
Ethernet
Go to Ethernet menu to change TCP/IP
settings
Main
Enroll
Network
Ethernet
Cloud
Internet
Ethernet
Comm mode
Port 5010
Comm.PW Disabled
PW Setting 12345
Option Active
Retrieve IP mode Static
Get DNS Manual
Device IP
Subnet mask
Gateway
4. Basic Operation
0/12345 is the default Admin ID and password.
You can change to your own password or set other user as Admin later.
· 3 ·
Tue 07-03-2018
Status IN Press finger/Card
Plug in the power supply and wait for
the device to boot up Press [M] key to go to Admin menu.
Input “0” as ID and “12345” as password to log in
Go to Setting\Time menu to
set up date and time
Status / IN Press finger/Card
Password
0
07-03-2018 10: 43:45
Time
Mode Manual
Time
Date
Time format
Date format
Set
hr
M/Back
07-03-2018 10: 43:45
Browser the Setting\Device menu to view or
edit the Device ID and Admin PIN Code
M back
Restart
Device
Volume
Device ID
Admin PIN Code
web switch
web port
Yes
Factory Reset(FN)
Project Description:
1.Device ID:(0-99999999)
07-03-2018 10: 43:46
Add Users to Device
Swipe card in the card area,
the device will get the card
number Move the cursor to
“Enroll FP” section and click
[OK] key
Go to User\Add menu. Follow the menu
to input ID, name and password. Move
the cursor to “Card” section
Name
Password
Card
Admin 0-User
Enroll FP
Mode
M/Back
Add
07-03-2018 10: 43:46
· 5 ·
180711
Place finger in the center of the sensor Place finger flatly and smoothly
on the sensor
Finger not placed in the
center of the sensor
Finger placed askew Use of fingertip
OK
Correct method:
Incorrect method:
Input Characters
Verity the Fingerprint
· 4 ·
When you edit name, you may need to input characters. Here are the steps to
input characters:
* Using the left and right arrow key to move the cursor to the field
* Press [FN] key on the keypad, a character input window”Aa“ will be displayed on
the bottom of the screen. Then press the number/letter key.
A second window will appear and you can select the letter by number key
* Press [IN] key on the keypad, the character input window will switch between
“Aa”,”123”,”,.!?” and ”Pin”. You can select the window to input the letter, number
or special symbols.
5. Wiring Diagram
Device Communication Setup
Anviz brand and product are trademarked and protected under law of the United States. Unauthorized use is prohibited.
For
more
information,
please
visit
www.anviz.com, or send email to [email protected] for more help.©2018 Anviz Global Inc. All Rights Reserved.
07-03-2018 10: 43:46
M/Back
07-03-2018 10: 43:46
M/Back
07-03-2018 10: 43:46 M/Back
07-03-2018 10: 43:46
M/Back
07-03-2018 10: 43:46
Fingerprint & Card Time Attendance
Reminder
Scan the same finger three times
to enroll the fingerprint
M/Back
Enroll
Press Finger
07-03-2018 10: 43:46
Restart
M/back
Basic Setting
