Anviz T50 User manual

T50 user manual（V1.2）
Subjecttochangewithoutnotice

2
1 Product Introduction
1.1 T50 Product introduction
T50 is a new standalone time attendance and access control system
produced by this company in 2011. With the use of Anviz optical
fingerprint sensor and new fingerprint recognition algorithm, T50 can
identify all difficult fingerprints and has solved the long-lasting problem in
fingerprint recognition field.
Function:
World leading brand; Simplicity-led design
Anviz optical fingerprint reader; Scratch-proof, unbreakable and durable;
Well accept all kinds of fingerprints
Stylish blue LCD; Musical buzzer
Work Stand-alone; Standard 1000 fingerprints;
Standard 50000 records
Multiple identification method: fingerprint only, ID + password, ID +
fingerprint
Standard RS485, Wiegand26 output, dry contact output,
optional TCP/IP network interface
Optional Anviz SC021 access controller for separate type
secure access control

3
Optional waterproof cover for outdoor use; Doorbell
button for direct connection with door bell
Wall mounted. Combined 2-in-1 function for both time
attendance and access control.
1.2 Technical Parameter
Items Parameter
Size 137MM×65MM×40MM
Material ABS plastic
Sensor Optical CMOS
FP capacity 1000
Record capacity 50000
Resolution 500DPI
Scan Area 18*22 MM
Communication
method
RS-485,TCP/IP，USB
Identification
method
FP, ID+PSW, ID+FP
Identification time ≤1 s
FRR 0.001%
FAR 0.00001%
Temperature -10℃--- <60℃
Working current <130mA
Sleeping current <20uA
ESD >15000V

4
Chapter 2 Operation Guide
This chapter is mainly about appearance
illustration and relevant system settings
such as how to add and delete users etc.

5
2 Operation Guide
2.1 Keypad Introduction
2.2 Default Interface
Connect device to 12v power. Device will make 4 short beeps and enter default
interface as following,
2.3 Management Menu
In order to manage data, you need to enter management menu. Firstly press
[OK/M] key to password verification interface,
Input management password (default is 999999). Press [OK/M] key to confirm.
Device will make 4 prompt sounds and enter management menu.
Press [0/→] key to switch between different options in the interface above.
2.3.1 Add User
In management menu, press [0/→] key to select [ADD] option, and press [OK/M]
key to enter “Add user” interface.
ADD DEL. TIME SET.
PW ××××
08-23-11 11:16:32
IN / PLACE FINGER

6
Input new user ID (max. 6 digit, i.e. 000001). Press [OK/M] to confirm. Then
press [0/→] to choose FP 1st or 2nd or password to register.
2.3.1.1 FP registration:
Select FP1 (or FP2) and press [OK/M] to confirm and start FP registration.
Place finger needed to register on scanner window. After a short beep, move
finger away. The LCD interface will show as following,
Place the same finger on scanner window again. After a short beep, move your
finger away. If success, device will sound 4 short beeps. The interface will show “OK”
like this,
If registration fails, device will prompt a long beep and interface will show “Fail” like
this,
ID 000001
ADD
ID 000001
ADD
FP 1
FAIL
ID 000001
ADD
FP 1
OK
ID 000001
ADD
FP 1
OK
ID 000001
ADD
FP 1
PLACE FINGER

7
If the fingerprint has been registered, device will sound “di-di-” indicating this
fingerprint repeats and interface will show “FAIL” like this,
2.3.1.2 Password registration:
Press [0/→] and switch to PW option,
Press [OK/M] to confirm and start password registration,
Input user password through keypad (max. 6 digit). Press [OK/M] to confirm and
device will sound two short beeps which prompts input password again. After
inputting password twice, press [OK/M] to confirm. And device will sound 4 short
beeps indicating success.
2.3.2 Delete User
In management menu, press [0/→] and select [DEL.].
Press [OK/M] to enter “Delete user” interface.
ID 000001
ADD PW ××××
PW
OK
ID 000001
ADD PW
PW
ADD DEL. TIME SET.
ID 000001
ADD
FP 1
FAIL
ID 000001
ADD
PW

8
Input the user ID needed to be deleted (i.e. 000001). Press [OK/M] to confirm.
Device will sound 4 short beeps indicating the user deletion is successful.
2.3.3 Set Date/time
Press [0/→] to select [TIME] option
Press [OK/M] to enter setting interface.
Input the date with number key. Press [OK/M] to confirm. And then set time as
following,
Input the time with number key. Press [OK/M] to confirm. Device will sound 4
short beeps, indicating set successfully.
2.3.4 Administration Password Setting
Press [0/→] to select [SET.] option:
ID 000001
DEL.
OK
ID 000001
DEL.
08-23-11 11:37:56
OK
08-23-11 22:16:32
ADD DEL. TIME SET.

9
Press [OK/M] to enter admin password setting interface,
Input admin password through keypad (6 digits). Press [OK/M] to confirm and
device will sound two short beeps which prompts input password again. After
inputting the same password twice, press [OK/M] to confirm. And device will sound 4
short beeps indicating success.
If the two passwords are different, the device will sound a long beep, indicating
the password modification fails.
2.3.5 Verification
2.3.5.1 Password Verification
In default interface, input user ID through keypad and press [OK/M] to confirm.
Secondly input user password, press [OK/M] to confirm.
If device sounds 4 short beeps, prompting verification is successful.
08-23-11
ID 000001
PW
IN /
PW ××××
FAIL
PW ××××
OK
PW
ADD DEL. TIME SET.

10
If device sounds a long beep prompting verification fails.
2.3.5.2 Fingerprint Verification
In default interface, place registered finger on scanner window. After a short
beep, move the finger away.
If device sounds 4 short beeps, prompting verification is successful.
If device sounds a long beep prompting verification fails.
2.3.6 Initialization:
Return password to factory defaults
To initialize the device and reset the management password back to the default
password (999999) press the ‘Initialization Button’ until heard beeps. The operation
will not delete any user data stored in the device.
08-23-11 11:37:56
IN / FAIL
08-23-11
ID 000001
IN / OK
08-23-11
ID 000001
PW ××××
IN / FAIL
08-23-11
ID 000001
PW ××××
IN / OK

11
2.3.7 Reset: Restarts Device
Press the ‘Reset’ button at the button of the device until LCD go out. Now
release the button the device will restart.
Notice：Resetting wil not delete any information or settings stored in the device.