Assa Abloy SARGENT FM7100 Series User manual

1-800-727-5477 • www.sargentlock.com
A8010G 08/22
Installation Instructions
FM7100 Series
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express
written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
RH Door Shown
RIGHT HAND (RH) RIGHT HAND REVERSE (RHR) LEFT HAND REVERSE (LHR)
LEFT HAND (LH)
INSIDE
OUTSIDE
INSIDE
OUTSIDE
INSIDE
OUTSIDE
INSIDE
OUTSIDE

2
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Tools Needed
1
This device is intended to be part of an integrated door, frame and hardware assembly UL-approved for both FEMA P-361
(2014), FEMA P-320 (2015) & ICC 500 (2014) guidelines for both in-swing and out-swing doors.
Mounting Hardware (Full Scale)
2
(3)
Flat Head Hex Socket
12-24x1"
(10)
Flat Head He x Socket
1/4-20x1"
(4)
Oval Head Phillips
12-24x1 1/2"
(2)
Flat Head Socket
5/16-18x1”
(2)
Drive Pin
(1 Spare)
(2)
Drop-in
Anchor
5/32 Hex5/64 Hex 3/16 He
x
1/8 Hex
Supplied:
Flat
Head
Phillips
Head Marker Chisel Drill
Tape Measure
Anchor
Set Tool Flashlight Mallot
Hollow
Tip Dr iver
9/16" &11/16"
Wrench
Required:
(2)
Push-on
Retaining
Ring
(1 Spare)

3
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Verify Handing
3
Right Hand Door Shown
Left Hand Door Shown
INSIDE OUTSIDE
Verify Door Dimensions
4
LOCK IN condition can occur and EMERGENCY EGRESS will be prevented if critical dimensions are not met.
Device will not operate, if door cutouts are not within the dimensions below.
Right Hand Door Shown
42" - 42-3/4"
40 41 42 43 44 45 46
37-1/2" - 38-1/4"
36 37 38 39 40 41 42 43
INSIDE OUTSIDE

4
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Install Deadbolt Assembly
5
Deadbolt must be retracted before moving to
the next step.
(2)
Flat Head Hex Socket
1/4-20x1" Right Hand Door Shown
FM7100
Install Bottom Bolt Assembly
6
(3)
Flat Head Hex Socket
12-24x1"
2
1
Right Hand Door Shown
FM7100

5
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Align Bottom Bolt Assembly
7
1
3
Right Hand Door Shown
UP
DOWN
2OR 2
PUSH
PUSH
FM7100

6
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Prep Top Assembly
8
5
Right Hand Door Shown
MARK
CLOSEST HOLE
LA Y TOP ROD
ON DOOR
1
4
2
THREAD ON FULLY
AND TIGHTEN 3
IMPORTANT
!

7
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Install Top Assembly
9
Right Hand Door Shown
FM7100
FM7100
(2)
Flat Head Socket
5/16-18x1”
For doors manufactured before July 2022, drill & tap top
bolt screw holes for 5/16-18 screw threads.

8
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Align Top & Bottom Pinning Holes
10
1
2
Right Hand Door Sho wn
GO TO STEP 11
GO TO STEP 10a OR 10b
PUSH
Bottom
Rod
Top
Rod
FM7100

9
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Adjust Misaligned Pinning Holes Up
10a
1
2
Right Hand Door Sho wn
PUSH
=
3 4
GO TO STEP 11
Bottom
Rod
Top
Rod
FM7100

10
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Adjust Misaligned Pinning Holes Down
10b
4
=
3
1
2
Right Hand Door Shown
PUSH
Bottom
Rod
Top
Rod
GO TO STEP 11
FM7100

11
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Pin Three Assemblies
11
12
Right Hand Door Sho wn
(1)
Drive Pin
(1)
Push-on
Retaining
Ring
INSIDE OUTSIDE
FM7100
FM7100
Mount Door to Frame
12
TO FRAME
Right Hand
Door Shown
Do not trim
door if door
rubs along
floor!
!
FM7100

12
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Check for Hold Open
13
3
2
1
GO B ACK TO
PUSH
GO TO STEP 14
FM7100
FM7100
FM7100
1

13
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Adjust Device
14
1
3x
2
=
!
Hand
Tighten
Device Must
Be In HOLD
OPEN Before
Adjusting
Device
!
Must
Rotate
Exactly 3
Re volutions
!

14
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Trigger Device & Final Check
15
2
PUSH
3
GO B ACK TO STEP 14 GO B ACK TO STEP 14
PUSH
FM7100
FM7100
FM7100
FM7100
1

15
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Assemble Cylinder into Outside Trim
16
Mount Outside and Inside Trim
17
TRIM
(4)
Oval Head Phillips
12-24x1 1/2"
INSIDE OUTSIDE
FM7100

16
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Install Top Latch into Door Frame
18
Attach Deadbolt Strike Plate to Frame
19
(4)
Flat Head Hex Socket
1/4-20x1"
FM7100
(2)
Flat Head Hex Socket
1/4-20x1"
FM7100

17
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Prepare Floor for Bottom Strike
20
2
1-1/8" Dia.
x 7/8" Deep
3
1
(2)
Flat Head Hex Socket
1/4-20x1"
c
1 2
e
1 2
d
b
9
12
a

18
1-800-727-5477 • www.sargentlock.com
FM7100 Series
Installation Instructions
Multi-Point Lock
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
Install Bottom Strike
21
2
3/8" Dia. x 1-1/2" Deep
1
1/4" MAX
1/8" Deep
3
Bottom Of Door
To Top of Strike
Chisel as required

19
1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
A8010G 08/22
FM7100 Series
Multi-Point Lock
Test Installation
22
5/64 Hex
Tighten after
door is adjusted
and works properly.
IMPORTANT
!

A8010G 08/22
1-800-727-5477 • www.sargentlock.com
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.