Assa Abloy Yale Real Living Assure Lock YRC216 Technical specifications

1
Yale Locks
YRC216 Z-Wave Plus System Integrators
Guide Yale Assure Deadbolt Lock
Document Revision: 1
January 2, 2019

2
Contents
Yale Z-Wave Plus Product Info ......................................................................................................................3
Supported Command Classes ..................................................................................................................3
Association Table ....................................................................................................................................3
Notifications Table ..................................................................................................................................4
Configurable Parameters.........................................................................................................................6

3
Yale Z-Wave Plus Product Info
Manufacturer ID: Assa Abloy (0x0129)
Z-Wave Device Type: Door Lock Keypad
Z-Wave Role Type: Listening Sleeping Slave (LSS)
Product ID: 0x0600
Product Type ID:
0x8004 –YRC216-ZW2 (Push Button Deadbolt)
Supported Command Classes
Command Class Z-Wave Plus Info
Command Class Manufacturer Specific
Command Class Security
Command Class Device Reset Locally
Command Class Power Level
Command Class Version
Command Class Battery*
Command Class Door Lock*
Command Class Door Lock Logging*
Command Class Schedule Entry Lock*
Command Class User Code*
Command Class Time Parameters*
Command Class Time*
Command Class Association*
Command Class Association Group Info*
Command Class Notification*
Command Class Configuration*
Command Class Firmware Update Md*
* Command Class Requires Security
Association Table
Group ID
Maximum Nodes
Description
Commands
1
1
Lifeline
Command_Class_Battery, Battery_Report ;
Command_Class_Notification, Notification_Report;
Command_Class_Configuration, Configuration_Report;
Command_Class_Device_reset_locally,
Device_Reset_locally_notification

4
Notifications Table
Alarm Reports
Alarm
type
Alarm Level
Description
Master Code
changed.
0x70
0x00
Master code was changed at keypad
0xFB
Master code was changed over RF
User added
0x(01-max
users)
User added. Alarm level = user slot number
User deleted
0x21
0x(01-max
users)
User was deleted. Alarm level = user slot number
Tamper Alarm
0xA1
0x01
keypad attempts exceed code entry limit
0x02
front escutcheon removed from main
RF Operate Unlock
0x19
0x01
by RF module
Manual Unlock
0x16
0x01
By key cylinder or
inside thumb turn
Keypad Unlock
0x13
0x(01-max
users)
Where Alarm level represents user slot number (0xFB =
Master Code)
Manual Lock
0x15
0x01
by key cylinder or inside thumb-turn
0x02
by touch function (lock and leave)
0x03
By inside button
RF Operate Lock
0x18
0x01
by RF module
Keypad Lock
0x12
0x (01 –max
users)
Where Alarm level represents user slot number
Non Access
0x26
0x(01-max
users)
A Non Access Code was entered at the lock.
Where alarm level represents user slot number
Deadbolt Jammed
0x09
0x01
Deadbolt jammed
while locking
0x02
Deadbolt jammed
while unlocking
Low Battery
Alarms**
0xA9
0x (Current %)
Too Low to operate (Starting at 3.8V)
0xA8
0x (Current %)
Critical Battery Level (Starting at 3.9V)
0xA7
0x (Current %)
Low Battery
(Starting at 4.2V)
Auto Lock Operate
Locked
0x1B
0x01
Auto re-lock cycle complete, locked.
Duplicate Pin-code
error
0x71
0x (01-max
users)
Where Alarm level represents user slot number
Alarm generated in response to add user RF cmd.
This alarm is not generated when attempting to add
duplicate pin at the keypad. The lock simply denies it

5
and plays the “Denied”. Trying to duplicate the
master code will result in a 0x71 0x00 alarm report.
RF Module Power
Cycled
0x82
0x00
Power to RFM was restored, sent by RF module. The
lock doesn’t send any alarm to the RF module when
power is cycled.
Disabled user
entered at keypad
0x83
0x(01-max
users)
A disabled user pin code was entered at the keypad
Valid user but
outside of schedule
0x84
0x(01-max
users)
A valid user can be both a normal user and a Non-
Access user. If a non-access user is out of schedule this
alarm will be sent instead of the non-access alarm.
Daily Repeating
Schedule
Set/Erased
0x60
0x(01-max
users)
Schedule(s) has been set/erased for specified user ID
Daily Repeating
Schedule
Enabled/Disabled
0x61
0x(01-max
users)
Schedule(s) has been enabled/disabled for specified
user ID
Year Day Schedule
Set/Erased
0x62
0x(01-max
users)
Schedule(s) has been set/erased for specified user ID
Year Day Schedule
Enabled/Disabled
0x63
0x(01-max
users)
Schedule(s) has been enabled/disabled for specified
user ID
All Schedule Types
Erased
0x64
0x(01-max
users)
Schedule(s) has been set/erased for specified user ID
All Schedule Types
Enabled/Disabled
0x65
0x(01-max
users)
Schedule(s) has been enable/disabled for specified user
ID
** - The Yale Assure Deadbolt locks also supports a 3rd low battery alarm, too low to operate. This alarm
is sent out as a Battery Report (with value = 0xFF) through the Battery Command Class. This is the last
low battery alarm level before the product stops functioning.

6
Configurable Parameters
Configuration
Parameters
Parameter
Number
Size
Description
Silent mode on/off
1
1 byte
Level control, 1 = High Volume, 3 = Silent. Default is 1
or High Volume
Auto Relock on/off
2
1 byte
0x00 = OFF, 0xFF = ON default is 0x00 or OFF
Auto Relock time
3
1 byte
10 to 180 seconds default is 30 seconds
Wrong Code Entry Limit
4
1 byte
3 to 10 default is 5 times
Shut down time (after
wrong code entries)
7
1 byte
10 to 180 seconds default is 60 seconds
operating mode
8
1 byte
00 = normal mode (this is the default mode)
01 = vacation mode, keypad lockout
One Touch Locking
11
1 byte
0x00 = OFF, 0xFF = ON default is 0xFF or ON.
Privacy Button
12
1 byte
0x00 = OFF, 0xFF = ON default is 0x00 or OFF
Lock Status LED
13
1 byte
0x00 = OFF, 0xFF = ON default is 0x00 or OFF.
Reset To Factory
Defaults
15
1 byte
01 = Lock will execute Reset To Factory.
No default value

1
P/N - - - Rev BYRL EMICL PBINSTL FUL
Retrofitting or modifying this product may impact fire rating, safety features and warranty.
Consult with code specifications to ensure compliance with all codes and ratings.
4" Touchscreen Shown - 5.5" Available
Inside
of Door
Yale Assure Lock
®®
Installation and Programming Instructions
(YRC216)
Electronic Interconnected Push Button
®
Network Module
(Optional)
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
Outside
of Door

2
P/N - - - Rev BYRL EMICL PBINSTL FUL
Before You Begin
1-3/8" (35mm) Min to
1-3/4" (44.5mm) Max
4-1/2"
(114) Min
x1x2 x8
Network Module
(Optional)
3/32"1/8"
Template
x2 x2 x2
#2
1/8" 2-1/8"
1
1"

3
P/N - - - Rev BYRL EMICL PBINSTL FUL
Mark Door Reference Lines
C
L
R
E
M
O
V
E
Template
EXISTING
2-3/8" or 2-3/4"
Backset

4
P/N - - - Rev BYRL EMICL PBINSTL FUL
1Preparing Door
(if necessary)
!
Drill holes 1/2 way thru
door then complete
from other side to
prevent splitting.
Ø2-1/8" 2-3/8"
or
2-3/4"
Ø1"
Template
4"
or
5.5"

5
P/N - - - Rev BYRL EMICL PBINSTL FUL
2Installing Strike Plates
Door Frame
Inside
of Door
Frame
1" Dia. x
1"Deep
1" Dia. x
1/2"Deep
Frame
7-16 / 8-32 x 1" UNCWS
x4

Left Hand “ ”, Hinges Left.LH
Open Inward.
Left Hand Reverse " ", Hinges Left.LHR
Open Outward.
Right Hand " ", Hinges Right.RH
Open Inward.
Right Hand Reverse " ", Hinges Right.RHR
Open Outward.
The hand of a door is determined from the secure side of the
door. The term "secure" means the side from which you initially
unlock and enter.
Determining Handing
6
P/N - - - Rev BYRL EMICL PBINSTL FUL

7
P/N - - - Rev BYRL EMICL PBINSTL FUL
3Changing Handing
(if necessary)
4-24 x 1/4" PPHMS
4" Left Hand to 4" Right Hand Shown
x2
3
!
DO NOT TAMPER
WITH OR LOOSEN
E-CLIP AND ITS
ASSEMBLY
!
DO NOT LOOSEN
THESE 6 SCREWS
OR REMOVE
COVER

Changing Handing (if necessary)
continued
3
8
P/N - - - Rev BYRL EMICL PBINSTL FUL

9
P/N - - - Rev BYRL EMICL PBINSTL FUL
Lockset Handing Configurations
4" Left Hand
For 5.5"
For 4"
4" Right Hand
For 5.5"
For 4"
After handing is changed, check that lever and thumbturn rotate freely.
Test Lever and Thumbturn

10
P/N - - - Rev BYRL EMICL PBINSTL FUL
4Installing Fire Cups
Inside of Door
Both Fire Cups and a markedUL
Latchbolt must be used to
qualify for listing.UL
!

11
P/N - - - Rev BYRL EMICL PBINSTL FUL
5Adjusting Deadbolt Latch
(If adjustable deadbolt latch provided)
O
optional
default
UP
2-3/8" position
UP
2-3/4" position
Press
Pull

12
P/N - - - Rev BYRL EMICL PBINSTL FUL
6Installing Deadbolt Latch & Latchbolt
x4
7-16 / 8-32 x 1" UNCWS
Curved edge of latchbolt
faces direction door closes.
!
Choose latchbolt
based on backset.
(2-3/8" or 2-3/4")
Inside of Door
Bolt must be in
retracted (unlocked)
position before
installing.
!
Ensure arrow
stamped on deadbolt
is .UP
!
UP

13
P/N - - - Rev BYRL EMICL PBINSTL FUL
M6x55 PPHMS
x2
7Installing Exterior Deadbolt
UP
U
P
Inside of Door

14
P/N - - - Rev BYRL EMICL PBINSTL FUL
8Installing Lock Chassis
10-32 x 1-1/2" PPHMS
Inside of Door
x2
U
P