Atmos i View 21 COLPO User manual

ATMOS®i View
COLPO
GA1GB.420101.0
2018-04 Index 24
Operating Instructions
English

2
Further information, accessories, consumables and spare parts
are available from:
ATMOS
MedizinTechnik GmbH & Co. KG
Ludwig-Kegel-Straße 16
79853 Lenzkirch
Germany
Phone [phone]
Fax: [phone]
[phone] (Service Centre)
[email protected]
www.atmosmed.de
4.0 Operation...........................................................15
4.1 Colposcope suspension......................................15
4.2 Mechanical arm...................................................15
4.3 Hand grips...........................................................15
4.3.1 T-hand grip..........................................................15
4.3.2 Lateral double hand grip .....................................15
4.4 Adjusting the interocular distance.......................16
4.5 Adjusting the eye pieces.....................................16
4.6 Exchanging the lenses........................................17
4.7 Exchanging the lenses with manual ne
focusing...............................................................17
4.8 Exchanging the VarioFocus lens.........................17
4.9 Adjustment of the 5 fold magnication changer..17
4.10 Focussing............................................................18
4.10.1 Fine focussing.....................................................18
4.11 Exchanging the binocular tube............................18
4.12 Pivoting green lter .............................................18
4.13 Pivoting H.A.S.I. lter..........................................19
4.14 Shadowless illumination......................................19
4.15 Colposcope zoom and object eld size...............19
4.16 Measuring scale..................................................19
4.17 Image and video recording .................................20
4.17.1 Adjusting the light mode of the integrated HD
camera................................................................20
4.18 Endoscope adapter.............................................21
4.19 HD adapter..........................................................21
5.0 Cleaning and care.............................................22
5.1 Basic instructions................................................22
5.2 Cleaning the mechanical microscope surface ....22
5.3 Cleaning of lenses / eyepieces ...........................22
5.3.1 Cleaning optical surfaces....................................22
5.3.2 Optical surface of the endoscope port ................22
5.3.3 Fogging of optical surfaces.................................23
5.4 Recommended surface disinfectants..................23
5.5 Hygiene plan.......................................................23
6.0 Maintenance and Service.................................24
6.1 Basic instructions................................................24
6.2 Sending in the device..........................................24
6.3 Exchange of spare parts.....................................24
7.0 Troubleshooting................................................25
8.0 Accessories and Options.................................26
9.0 Technical data ...................................................27
10.0 Disposal.............................................................28
11.0 Notes on EMC....................................................29
1.0 Introduction.........................................................3
1.1 Notes on operating instructions ............................3
1.2 Intended use .........................................................4
1.3 Function ................................................................5
1.4 Explanation of pictures and symbols ....................6
1.5 Scope of supply ................................................... 7
1.6 Transport and storage...........................................7
2.0 For your safety....................................................8
3.0 Setting up and starting up .................................9
3.1 Overview.............................................................. 9
3.2 Setting up............................................................10
3.2.1 Connection to the mains supply..........................10
3.2.2 Microscope overview ..........................................10
3.2.3 Operating elements at the colposcope ...............11
3.2.4 Rear view of the control device of the
ATMOS®i View 21 COLPO.................................11
3.2.5 Rear view of the control device of the
ATMOS®i View 31 COLPO
(not with an integrated HD camera)....................11
3.2.6 Rear view of the control device of the ATMOS®i
View 31 COLPO with an integrated HD camera.12
3.3 Integration possibilities........................................12
3.4 Starting up...........................................................13
3.5 Operation requirements ......................................13
3.6 Starting up at a glance........................................14
Table of contents

3
1.1 Notes on Operating Instructions
These operating instructions contain important notes on how to operate the ATMOS®i View COLPO safely,
correctly and effectively. Their reading helps to avoid risks, and also to reduce repair costs and down-times.
This increases, amongst other things, the reliability and service-life of the colposcope.
These operating instructions serve not only for new operating personnel to be instructed in its use, but also
for use as a reference manual. Reprints (also in extracts) only with permission in written form by ATMOS.
These operating instructions must always be kept available near the colposcope.
Care and safety inspections in conjunction with professional execution provide for operational safety and
readiness for use of your ATMOS®i View COLPO and are therefore a must besides regular cleaning.
Repair work and safety inspections may be carried out only by expert personnel authorised by ATMOS. By
applying only original spare parts you will have the guarantee that operational safety, readiness for work
and the value of your ATMOS®i View COLPO will be preserved.
• The product ATMOS®i View COLPO bears CE marking CE according to the EC Directive of the council
for medical products 93/42/EEC and meets the basic requirements of Appendix I of the directive.
• The product ATMOS®i View COLPO complies with all applicable requirements of the Directive 2011/65/
EC restricting the use of certain hazardous substances in electrical and electronic equipment (“RoHS”).
• The declaration of conformity and our general standard terms and conditions can be obtained on our
website at www.atmosmed.com.
• The quality management system applied at ATMOS has been certied according to international
standards EN ISO 13485.
• Prior to start-up please peruse chapter 2.0 „For your safety“, in order to be prepared for any possible
dangerous situations.
Please keep this document for future consultation!
These operating instructions are valid for the following
devices:
ATMOS®i View 21 COLPO .........................REF 605.0000.0
Colposcope with an integrated, fanless, high transmission,
high performance LED light in the colposcope head
ATMOS®i View 31 COLPO .........................REF 606.0000.0
Colposcope with an integrated, fanless, high transmission,
high performance LED light in the colposcope head
1.0 Introduction

4
1.2 Intended use
Name: ATMOS®i View 21 COLPO
ATMOS®i View 31 COLPO
Main functions: Visualization of natural body orices (genital area) for examinatory purposes
Medical indications /
application:
Standard gynaecological examinations. Visual control of the genital area.
Specication of the main
function:
The application organ is illuminated for examination purposes and can be
visualized on a monitor if desired by an integrated, fanless high transmission,
high performance LED light source, 5 fold magnication changer, integrated
camera module, pivoting green lter and an automatic light control via tilt
sensor; the light output is min. 120 kLux (200 mm)with a colour temperature of
5.500 K ± 10%.
User prole: Examinations and surgical interventions which are carried out using the
colposcope may only be performed by doctors with appropriate training.
Only qualied personal with a proper hygiene training may prepare the
colposcope for surgical interventions.
Installation and maintenance may only be carried out by service technicians
who were trained and authorised by the manufacturer.
Patient groups: No restrictions
Application organ: Natural orices (portio and vulva)
Application time: Short-term, under normal conditions for permanent use over a maximum up to
30 days
Application site: Application sites are hospitals, doctor’s ofces, ORs at gynaecologists. The
examination with the colposcope may only be executed by medically trained
persons.
The colposcope may only be used in closed rooms, on rm ground or mounted
to the ATMOS®Chair 41 Gyne .
In ORs an appropriate protective sleeve must be used.
Contraindications: • No application in ophthalmology.
The product is: active
Sterility: The colposcope is not a sterile product.
Single-use product /
reprocessing:
The colposcope is intended for multiple use. The device and parts of the
accessories are reusable. For information on reprocessing, cleaning and
disinfection please see the operating instructions.
1.0 Introduction

5
1.3 Function
The ATMOS®i View COLPO is a complete colposcope system, consisting of optics and lighting. It produces outstanding pictures for
examination purposes with the use of latest LED technology and patent registered optics. The interaction between the integrated
fanless, high transmission, high performance LED, the apochromatic optics and the precisely tting options offer best working
quality.
The ergonomically assorted buttons, two selectable hand grips and the integrated control panel provides the user with highest
level of ergonomic comfort and suitability for daily use as well as an outstanding and intuitive handling. Via the control panel the
individual options of the ATMOS®i View COLPO can be activated. Besides the triggering of the camera (freeze frame) and starting
/ stopping of possible video sequences, the operator is capable of manually switching the LED light source on and off despite
the activated automatic light control. Due to the variety of options which the ATMOS®i View COLPO has to offer, the user is in a
position to congure a colposcope to suit his requirements. The following functions can be chosen optionally:
• 4 lenses with different focal distances (200, 250, 300 and 400 mm) with or without ne focussing or a VarioFocus 200-350 mm
(easy exchange of the lenses due to the respective thread on the colposcope head)
• 5 fold magnication changer. Exact adjustments due to turning disks on both sides.
• Binocular tubes, simple adaption due to the Zeiss dove tail.
• Pivoting colour lter
• Measuring scale
• Shadowless illumination
Due to the LED light source and the integrable camera solution (SD integrated respectively as HD or endoscope adapter for the
connection of an external camera) the ATMOS®i View COLPO is a guarantor for best image quality.
In connection with the mechanical support arm and the numerous connection possibilities to units and stands the ATMOS®i View
COLPO offers countless system possibilities, which can be individually adapted to suit the users environment!
These operating instructions describe all functions with a maximum conguration of the ATMOS® i View 31 COLPO.
1.0 Introduction

6
1.4 Explanation of pictures and symbols
!
■
●
click
Graphic symbols contained in these operating instructions
Warning, special diligent notice
Short cuts / symbols contained in these operating instructions
Please press where
dot indicates Numeration
General information
Follow the arrows
Replace
Check
Please read,
important information
Move, plug... in this
direction
Engage, check
correct t
Turn, shift... in this
direction
)Important information
Symbols ATMOS®i View
SN Serial number REF Order number
Manufacturing date Manufacturer
Observe operating instructions! Observe operating instructions!
Weight adjustment for the carrier arm Professional disposal
Alternating current Fuse
2Single use product - not for reuse.
Exchange after use.
This product complies with the relevant
requirements of EU Directives
Do not look directly into the light source of
the ATMOS®i View COLPO.
Ers.d. :
Zeichnungs /
Artikel-Nr.
(part no.)
Benennung (designation)
ATMOS-Zeichnungsnr. / drawing number
Konstr. - Nr.
Blatt
(sheet)
Zust.
(index)
Änderung
(revision)
Datum
(date)
Name
(name)
Gepr.
Bearb.
Name
Datum
Maßstab (scale)
1
Alle Maße in mm
all dimensions in mm
Allgemeintoleranzen /
General tolerances
DIN ISO 2768 - mK
über 30 mm ±0,3
Ers.f.:
Erstellt
79853 Lenzkirch / Germany
MedizinTechnik
[email protected]
ATMOS Medizin T echnik GmbH & Co. KG
Ludwig - Kegel - Str. 12, 14-16, 18
Tel: [phone]
Fax: [phone]
www.atmosmed.de
1:1 -
Aufkleber Verbotszeichen
+ Warnhinweis
19.02.2013 C.Reinhardt
3M Folie 7876EC + Laminat 7730FL
060.0618.0
Sitzen verboten gemäß ISO 7010
Nicht in die Optik sehen Farbe RAL1003 signalgelb
Sitting is prohibited.
Control panel buttons
Light on / off (independent of automatic light
control) Freeze frame
Video recording (start / stop) With an integrated HD camera: Adjusting the light
mode of the camera
1.0 Introduction

7
1.5 Scope of supply
• Prior to dispatch, the ATMOS®i View COLPO was subjected to an extensive functional test and was carefully packed.
Nevertheless, please compare the contents of the shipment on completeness immediately upon receipt (see delivery note).
1.6 Transport and storage
• After the transport of the ATMOS®i View in
temperatures below 0°C or prior to rst start up
it should be kept at room temperature for at least
six hours. If the ATMOS®i View COLPO is not
acclimatized it may not be used as damages to the
electronic components may be the result.
Only transport the device in a shipping carton, which is
padded and offers sufcient protection.
If damage occurs during transport:
• Document and report the transport damage.
• Send the device to ATMOS (Chapter „6.2 Sending in
the device“ on page 24).
Ambient conditions:
• Transport / storage:
-10...+50 °C;
30...95 % humidity without condensing
air pressure 500...1060 hPa
• Operation:
+10...+35 °C;
30...95 % humidity without condensing
air pressure 700...1060 hPa
Colposcope
Operating
Instructions
Colposcope arm
Protective cover
1.0 Introduction
Only ATMOS®i View 21 COLPO
Output of the power supply for the electron-
ics in the colposcope
Potential equalisation acc. to IEC 604175021
Fuse
Only ATMOS®i View 31 COLPO
Fuse Potential equalisation acc. to IEC 604175021
Colposcope Foot switch
Record function Freeze
not in use Output signals of the tilt sensor in the carrier arm
system
USB port
Sensor
Strobo
Extern 2
PC/USB
Video In
Record Freeze
Foot Switch
Out 1 Out 2 Out 3
Video Out
Microscope
Intern 1
Video In
2 x T 3,15A
100 - 240V~
Input video signal internal / external (Only with an
integrated HD camera)
S-video-output (not with an integrated HD
camera)
Sensor
Strobo
Extern 2
PC/USB
Video In
Record Freeze
Foot Switch
Out 1 Out 2 Out 3
Video Out
Microscope
Intern 1
Video In
2 x T 3,15A
100 - 240V~
Output video signal
(Only with an integrated HD camera)

8
!
For your safety
• To disconnect the ATMOS®i View COLPO from the
mains supply, rst remove the plug from the wall outlet.
Disconnect the connection line on the ATMOS®i View
COLPO afterwards only. Never touch plug or line with wet
hands.
• Please observe the ambient conditions stated in the
technical data (chapter 9.0).
• The ATMOS®i View COLPO meets the immunity to
interference requirements of IEC 60601-1-2 / EN 60601-
1-2 „Electromagnetic Compatibility – Medical Electrical
Devices“.
• ATMOS is not liable for personal injury and damage to
property if
- no original ATMOS parts are being used,
- the advice for use in these operating instructions is
not being observed,
- assembly, new settings, alterations, extensions
and repairs have been carried out by personnel not
authorised by ATMOS.
• Unplug the device immediately if you observe fumes,
sparks or weird noises.
• With every light source a warming of tissue due to
absorption may occur. Please make sure to reduce
duration of use to a minimum, to switch off the light
source when not in use and to check heat development
if necessary.
• The ATMOS®i View COLPO may be operated only
in rooms used for medical purposes, but not in areas
subject to explosion hazards and in oxygen rich
environments.
• Take into consideration, when setting up the colposcope,
that the elastic force of the arm – without colposcope
head – is exceedingly strong. Operate the break of the
height adjustment carefully.
• Risk of injury! Take care not to roll the mobile stand over
your feet when moving the stand.
• Please note that only PCs and monitors with IEC 606010-
1/EN 60601-1 approval may be connected to the video
outlet of the ATMOS®i View COLPO supply module!
• During operation, the user is obliged to regularly check
the microscope for proper function. In the unlikely
event of failure of the microscope, the user must take
precautions to continue the treatment of the patient with
suitable methods.
• To safely disconnect the unit from the mains, the power
cord must be removed from the IEC connector of the
control device!
• The ATMOS®i View COLPO is a device designed in line
with IEC 60601-1-1/EN60601-1 and it is a device with
protection class I. In order to avoid the risk of electrical
shock, this unit may only be connected to a mains supply
with properly installed earth conductor.
• Power cables, accessories and access cables need to be
checked for defects prior to setting up the ATMOS®i View
COLPO. Damaged cables must be replaced immediately.
• The ATMOS®i View COLPO may only be operated by
qualied personnel.
• The ATMOS®i View COLPO is not designed to be used
in an explosion-hazardous environment. Explosion-
hazardous areas may be caused by the use of ammable
anaesthetics, skin cleansing products and skin
disinfectants.
• If uids penetrated the ATMOS®i View COLPO it needs to
be sent in and may only be used after the check up of an
ATMOS authorised person.
• After the transport of the ATMOS®i View in temperatures
below 0°C or prior to rst start up it should be kept at room
temperature for at least six hours. If the ATMOS®i View
COLPO is not acclimatised it may not be used.
• Do not plug in electric connections (plug, socket) under
the use of force. If this is not possible check whether the
plug ts the socket. If you should ascertain a defect in the
connection you should have it repaired by our service.
• Never look straight into the sun with lenses or eye lenses.
• Always make sure that you do not blind patients with the
light source! Watch out that patients do not look directly into
the light source!
Never look directly into the light source!
> Damage to the eyes due to the strong glare.
• Please pay attention to the period tests in chapter 6
„Service and maintenance“ on page 24.
• Prior to every use the colposcope suspension (all joints
included) need to be checked for safe connections.
• Take care that the patient does not touch the device or
have any contact with it.
• Please observe the EMC Directives. Failure to follow this
guideline can result in a hazard.
• Make sure that the unit is positioned so that all the controls
and the on/off switch are always accessible.
• Dispose of wrappings accordingly.
• Before connecting the ATMOS®i View COLPO it needs to
be checked whether the requested mains voltage of the
ATMOS®i View COLPO matches the mains voltage of the
mains power supply.
• Only proper and undamaged plugs and extension cables
may be used.
2.0 For your safety

9
3.1 Overview
ATMOS®i View 21 COLPO ATMOS®i View 31 COLPO
Description
Examination colposcope with an inte-
grated, fanless, high transmission, high
performance LED light in the colposcope
head
Examination colposcope with an inte-
grated, fanless, high transmission, high
performance LED light in the colposcope
head
Integrated high
performance white
light LED
 
Automatic light
control  
Optimised stereo
effect  
Measuring scale Optional Optional
Integrated operating
panel Optional Optional
Colour lter Optional Optional green lter or
Optional H.A.S.I. lter
Integrated camera - Optional SD camera or
Optional HD camera
HD adapter for an
external camera - Optional
Endoscope adapter - Optional
Mains voltage 100–240 V 100–240 V
Light output
min. 120 kLux (200 mm)
min. 80 kLux (250mm)
min. 55 kLux (300 mm)
min. 30 kLux (400 mm)
min. 120 kLux (200 mm)
min. 80 kLux (250mm)
min. 55 kLux (300 mm)
min. 30 kLux (400 mm)
Operating life of the
LED 50 000 hours 50 000 hours
Colour temperature 5.500 K ± 10 % 5.500 K ± 10 %
Scope of delivery Dust cover,
operating instructions
Dust cover,
operating instructions
3.0 Setting up and starting up

10
T-hand grip
(optional)
Control panel
(optional)
HD adapter for SONY
digital camera (optional)
3.2 Assembly
Please make sure that the static conditions stated by ATMOS MedizinTechnik are met (for details see the separately enclosed
document „Static requirements for installing the ATMOS i View“). The fullment of these requirements must be conrmed by an
authorized expert.
Mains voltage and fuse: Mains voltage: 100-240 V; 50/ 60 Hz, fuse: 2 x T 3.15 A
Please note that only PCs and monitors with IEC 606010-1/EN 60601-1 approval may be connected to the video outlet of the
ATMOS®i View COLPO supply module!
3.2.1 Connection to the mains supply
Potential equalisation:
The ATMOS®i View COLPO supply module has a rear connection for potential equalisation which can be connected to the
potential equalisation rail in the room if need be. Hereby user/patient safety can be increased especially in the case of a defective
earth conductor. For connecting the device's potential equalisation plug with the potential equalisation rail of the room, use the
potential equalisation cord with REF 530.0030.0.
3.2.2 Microscope overview
!
Lateral double hand
grip (optional)
Rotating disk 5
fold magnication
changer
Wide eld eye
piece lenses with
binocular tube
Lens
Pivoting colour lter
(optional)
Brightness control
Measuring scale
(optional)
3.0 Setting up and starting up

11
Ers.d. :
Zeichnungs /
Artikel-Nr.
(part no.)
Benennung (designation)
Werkstoff (material)
Konstr. - Nr:Mikolp-200-001.
Blatt
(sheet)
Zust.
(index)
Änderung
(revision)
Datum
(date)
Name
(name)
Gepr.
Bearb.
Name
Datum
Maßstab (scale)
1
Alle Maße in mm
all dimensions in mm
Allgemeintoleranzen /
General tolerances
DIN ISO 2768 - mK
über 30 mm ±0,3
Ers.f.:
Erstellt
79853 Lenzkirch / Germany
MedizinTechnik
[email protected]
ATMOS Medizin T echnik GmbH & Co. KG
Ludwig - Kegel - Str. 12, 14-16, 18
Tel: [phone]
Fax: [phone]
www.atmosmed.de
Schutzvermerk DIN ISO 16016
-
27.03.3013 C.Reinhardt
1:1 -
Tasterfolie
060.0621.0
MODE
LED AFD
STROBO
Output of the power supply
for the electronics in the
colposcope
Connection for potential
equalization performance acc.
to IEC 60417-5021
IEC power plug with fuse inlay
for the connection to the mains
power supply
3.2.4 Rear view of the control device of the ATMOS®i View 21 COLPO
3.2.5 Rear view of the control device of the ATMOS®i View 31 COLPO (not with an integrated HD camera)
USB port for the
transfer of the key
status of the „Freeze
frame “- and „Video
recording -functions“.
Output signal of
the „Video record
function“
Output signal of
the „Freeze frame
function“
Output signals of
the tilt sensor in the
carrier arm system
not in use
S-Video-output of
the integrated SD
camera
Connection for
the supply to
the colposcope
electronics and
control line
Connection to the foot
switch for switching
between the light
channels
3.2.3 Operating elements at the colposcope
Light on / off
(independent of
automatic light
control)
Video recording
(start / stop)
With an integrated
HD camera:
Adjusting the light
mode of the camera
Freeze
frame
IEC power plug with fuse
inlay for the connection
to the mains power
supply
Connection for potential
equalization performance acc.
to IEC 60417-5021
3.0 Setting up and starting up

12
3.3 Integration options
Please note the assembly instructions for the integration options.
ATMOS®Chair 41 Gyne
For the integration into ATMOS®Chair 41 Gyne.
Please note that a save combination of the ATMOS®i View COLPO can only be
guaranteed with the ATMOS®Chair 41 Gyne.
Mobile stand
When moving the roller stand please make sure that the colposcope arm is in a retracted position and the screws are tightened.
Risk of injury! Take care not to roll the mobile stand over your feet when moving the stand.
When the device is placed in the working position the brakes must be locked.
!
3.2.6 Rear view of the control device of the ATMOS®i View 31 COLPO with an integrated HD camera
Sensor
Strobo
Extern 2
PC/USB
Video In
Record Freeze
Foot Switch
Out 1 Out 2 Out 3
Video Out
Microscope
Intern 1
Video In
2 x T 3,15A
100 - 240V~
PC connection
(optional)
Output signal
of the „Video
record function“
Output signal of
the „Freeze frame
function“
Output signals of
the tilt sensor in the
carrier arm system
not in use
HD video outlet from the
video source internal 1 or
external 2
HD video input. Can
only be used for the HD
camera module
HD video input from
an external HD
video source
Connection for
the supply to
the colposcope
electronics and
control line
Connection to the foot
switch for switching
between the light
channels
IEC power plug with fuse
inlay for the connection
to the mains power
supply
Connection for
potential equalization
performance acc. to IEC
60417-5021
3.0 Setting up and starting up

13
3.4 Starting up
• Remove the colposcope from the packaging. Check whether the mains current on the type label corresponds to the mains
power supply.
• Peruse safety information in part 2.0 prior to starting up the device for the rst time.
• Check the scope of delivery.
• After the transport of the colposcope in temperatures below 0°C it must be kept at room temperature for at least six hours. If
the colposcope is not acclimatized it must not be used.
• Take into consideration, when setting up the colposcope, that the elastic force of the arm – without colposcope head – is
exceedingly strong. Operate the break of the height adjustment carefully.
• To activate the ATMOS®i View COLPO please use the power switch on the front side of the control device.
3.5 Operating requirements
Please note that the following requirements must be adhered to for further application after the installation of the device:
• All joints and connection parts which are responsible for the safety of the device are securely fastened.
• All electronic connections (cables, plugs, power cables etc.) are in good order and condition.
• The specied mains voltage and frequency on the colposcope corresponds to the supply network.
• The colposcope is connected to a safety connection socket with the provided mains cable.
• Attention, never point or direct the beam into the patients eyes. Do not look directly into the light source.
• With every light source a warming of tissue due to radiation and absorption could occur. This could result
in damage to the biological tissue. Please keep the luminosity and duration of use to a minimum. Switch
off the light source when not in use and check the heat development if necessary.
!
3.0 Setting up and starting up

14
3.6 Starting up at a glance
Adjust colposcope to initial position on the colposcope suspension by use of the xing wheel.
Adjust colposcope horizontally and vertically.
Adjust all the clamps on the carrier and oat arm to secure the movability of the arm in compliance with the
requirements.
Swing in colposcope into the working space.
Adjust the interocular distance by pressing or pulling the lens tubes together or apart. The interocular distance is
perfectly adjusted when you look through and a circular picture is perceived!
Adjusting the eyepieces.
Persons without glasses Persons with glasses
Eyepieces remain in initial
position (eyepieces are pulled
out). Dioptre scale adjusted to
zero
People with defective vision
and glasses
People with defective
vision without glasses
(refraction values known)
People with defective
vision without glasses
(refraction values
unknown)
Keep glasses on, push
eyepieces in direction of the
lens tube until they engage
audibly. Adjust dioptre scale
to zero.
Remove glasses and adjust
dioptre scale to matching
number (eyepieces are
pulled out).
Remove glasses and adjust
both eyepieces to +5 dpt.
Remove the lens tube from
the colposcope head and
focus on an object* in the
distance. The object still
looks blurred. Turn the
dioptre ring of the rst
eyepiece slowly in clockwise
direction until the object
is sharp. Keep your other
eye closed while adjusting
the eyepiece. Repeat this
procedure for a couple
of times to determine an
average value. Adjust
the second eyepiece by
the same procedure and
reattach the lens tubes to the
colposcope head with the
connective screw (eyepieces
are pulled out).
* Never use the sun as an
object!
Set the 5-fold magnication changer unit to maximum zoom (2.0). Approach the object with the colposcope
(according to the chosen focal distance) until the image is sharp. If the zoom level is changed the grade of
sharpness is retained.
Brightness can be adjusted by the rotary knob on the bottom of the device if necessary.
3.0 Setting up and starting up

15
4.1 Colposcope suspension
By means of a corresponding suspension the colposcope
head is connected laterally to the colposcope arm. The
complete range of cables run through the suspension -
therefore no disturbing cables are visible from the outside
(with the exception of the connection to the HD adapter
and direct connection to a monitor). Due to a rotating
knob, which is situated on the side of the suspension, the
colposcope can be adjusted vertically to suit the individual
requirements of the user.
To x the colposcope head turn the rotating knob towards
you in a clockwise direction.
To loosen the colposcope head turn the rotating knob
towards you counter-clockwise.
Attention: Check the secure connection of the colposcope
to the suspension prior to every use!
4.2 Mechanical arm
The mechanical colposcope arm can be adjusted via four
set screws according to the individual requirements of the
user. Choose the strength of the clamping so that the free
movement of the arm suits your requirements. Turn the
set screw in clockwise direction to x the arm. To loosen
the arm turn counter-clockwise. To align the arm please
observe the assembly instructions for the integration
possibilities.
Attention: Prior to use ensure that the brakes of the
support arm are set correctly.
Automatic light switching: Once the arm is in the lower
position the LED light switches off automatically.
4.3 Hand grips
When purchasing the ATMOS®i View COLPO you may
choose between two versions of handles.
4.3.1 T-hand grip
(see gure)
4.3.2 Lateral double hand grip
The position of the lateral double hand grip can be gradually
adjusted by simultaneously pulling and turning the handle.
Rotating
knob
Adjusting screws
4.0 Operation

16
4.4 Adjusting the interocular distance
The interocular distance is adjustable between 50-75 mm.
• Swivel the colposcope into the work space.
• Look through the eye lenses and push or pull the eye
lens tubes together or apart with both hands.
The interocular distance is perfectly adjusted when you
look through with both eyes and a circular eld is visible!
4.5 Adjusting the eye pieces
Persons without glasses:
• Eyepieces remain in initial position. Initial position =
The eye steerings of the eyepieces are pulled out.
• Make sure that the zero of the dioptre scale complies
with the index on the eyepieces.
Persons with glasses:
• People with defective vision and glasses keep their
glasses on and push the eyepieces in direction of the
lens tube until they engage audibly. Adjust dioptre scale
to zero.
• People with defective vision (with known refraction
values) should take their glasses off and adjust the
dioptre scale on the eyepieces to the matching number
(the eye steerings of the eyepieces are pulled out).
The process of focussing is performed as described in
Chapter 4.9.
• People with defective vision without glasses adjust both
eyepieces to +5 dpt. Remove the binocular tube and
the eyepiece from the microscope head and focus on
a distant object*. The object still looks blurred. Slowly
turn the dioptre ring of the rst eyepiece in clockwise
direction until the object is sharp. The other eye must
remain closed. Repeat this procedure for a couple
of times in order to determine on an average value.
Adjust the second eyepiece by the same procedure.
Reattach the lens tubes to the microscope head with
the connective screw. The process of focussing is
performed as described in Chapter 4.10.
* Never use the sun as an object!
4.0 Operation

17
4.6 Exchanging the lenses
The designated thread on the colposcope head allows
for easy exchange and xation of the different lenses.
Due to the integrated screw mount lenses can be
loosened by turning it to the left hand side and xated by
turning it to the right.
4.7 Exchanging the lenses with
manual ne focussing
Mount lens as described above and secure it with the
intermediate screwed ring.
4.8 Exchanging the VarioFocus lens
To loosen the VarioFocus lens from the colposcope
head, turn it to the left. To tighten the VarioFocus lens on
the colposcope head, turn it to the right onto the thread.
Position the setting dial
The dial can be positioned on either side of the
VarioFocus lens.
Attention! During the process rmly hold the VarioFocus
lens just in case it may loosen itself from the colposcope
head and fall off.
Loosen the three grub screws on the lens. Continue
to hold the lens and turn the setting dial in the desired
position. Tighten the three grub screws.
4.9 Adjusting the 5-fold magnication
changer
The 5-fold magnication changer from ATMOS enables
free range zoom between 0.5x up to 2.0x.
• Select the desired zoom factor by selecting one of the
lateral rotating knobs.
• Pay attention that the chosen zoom factor engages
audibly with the groove.
• Freely adjustable zoom factors: 2.0 - 1.4 - 1.0 - 0.7 -
0.5.
• The magnication which points in the direction of the
eyepieces is the current magnication.
Lens
4.0 Operation
Grub screw
Setting dial

18
4.10 Focussing
• Adjust the zoom to maximum (2.0) on the magnication
unit.
• Approach the object with the colposcope until the
image is sharp.
• If the zoom level is changed the pre-adjusted degree of
sharpness is still maintained.
4.10.1 Fine-focussing
The optional ne focussing allows for sensitive and
precise focussing in a 17 mm range. Fine focussing is
necessary in order to focus accurately while zooming in.
• Replace the mounted lens with the appropriate lens
for ne focussing (simple mounting due to the screw
mount at the colposcope head. Secure with the
intermediate screwed ring).
• Conduct the focussing as described above.
• Adjust focus by use of the lateral adjusting disk.
4.11 Exchanging the binocular tube
The tubes focal distance of 160 mm allows for a
comfortable and fatigue-proof observation of the object
with both eyes. Working is made easier due to the
exceptionally large exit pupil and an increased stereo
base of 24 mm.
Please hold the lens tube with one hand while loosening
the screw. Otherwise the lens tube could drop.
• Loosen the screw on top of the lens tube and remove
the tubes from the colposcope head.
• Make sure that the gudgeons and grooves of the dove
tail xation engage and the tubes lie at.
• Tighten the screw again.
• Check for a secure t.
4.12 Pivoting green lter
The pivoting colour lter enhances contrast of the
microscopic picture for better visibility of vessel structures.
• Turn the function knob by 90° in clockwise direction to
swing in the lter.
• By turning the knob by 90° in an anti-clockwise
direction the lter is removed from the optical beam
path of the colposcope.
Undo screw
Binocular angled lens tube 45°
Binocular straight lens tube
Undo screw
Fine focussing
Pivoting green lter
4.0 Operation

19
0.75 mm 2 mm
10 mm
20 mm
5 mm
7 mm
10 mm
4.13 Pivoting H.A.S.I. lter
The pivoting H.A.S.I. lter gives a more contrasting and
clearer view of the mucosa.
• Turn the function knob by 90° in clockwise direction to
swing in the lter.
• By turning the knob by 90° in an anti-clockwise
direction the lter is removed from the optical beam
path of the colposcope.
4.14 Shadowless illumination
The option shadowless illumination prevents instruments from causing shadows in the eld of view. This option cannot be
retrotted.
• For the shadowless illumination no operating steps are required.
4.15 Colposcope zoom and object eld size
Lens f in mm
equals the
approximate
working
distance
Factor display on the magnication unit Eyepieces with
lens tubes
f = 160 mm
0.5 0.7 1* 1.4 2.0
Total zoom / visual eld Ø in mm
200 6.4 / 31 9 / 22 12.8 / 16 18 / 11 25.6 / 8 16 x
250 5.1 / 39 7.2 / 28 10.2 / 20 14.3 / 14 20.5 / 10 16 x
300 4.3 / 47 6 / 33 8.5 / 23 12 / 17 17 / 12 16 x
400 3.2 / 62 4.5 / 44 6.4 / 32 9 / 22 12.8 / 16 16 x
* Read off at factor 1 when using the colposcope zoom without the zoom unit.
4.16 Measuring scale
Measuring scale Figure not true to scale
This gure is for guidance
only and may not be used
for measuring absolute
quantities.
4.0 Operation
Via a small turning knob beneath the lens a true to scale dimension scale can be faded into the eld of the illumination light path.
This documentation display enables the measurement of objects regardless of the selected magnication. The scale will be
displayed in both the 3D picture and on all camera pictures and if required it can be faded out at any time.
• To fade-in the scale turn the knob by 45° in a clockwise direction.
• Via a 45° rotation in anti-clockwise direction the scale can be faded out from the path of illumination.
The following measures have to be observed: - Distance 2 mm, - Line width 0.75 mm
Please note that these specications are only correct for the following combination: Measuring scale for 300 mm lenses, 300 mm
lenses with or without ne focusing or wide angle eyepieces 16 x.
Pivoting H.A.S.I.
lter

20
4.17 Image and video recording
Integrated camera: If desired an SD camera or a HD
camera can be integrated in the ATMOS®i View 31 COLPO.
External video sources: External video sources can be
controlled via the panel buttons if they are connected to the
jack plugs “Freeze” and “Record”.
Control panel buttons:
Save image.
Start / stop the recording of a video frequency
Adjusting the light mode of the integrated HD camera.
The data are transmitted to a connected PC (USB interface).
The ATMOSoft software can process the data.
Only with an integrated HD camera
You can change between the integrated HD camera and
external video source by switching the LED light on or off.
As soon as the LED light goes off the integrated camera is
switched off and the data from the external video source is
displayed (Video Out 1 - 3).
Also observe this within the automatic light switching.
4.17.1 Adjusting the light mode of the integrated
HD camera
By pressing the MODE button once the current light mode
of the integrated HD camera is displayed on the monitor.
By pressing the MODE button again the light mode can be
changed.
Light mode Display on the monitor
Standard LED light remains unchanged.
When the power is switched on, the default
setting is automatically selected.
Center LED light will be displayed with less
reections.
Suitable for recordings through a speculum.
Warm LED light appears warmer.
4.0 Operation
Ers.d. :
Zeichnungs /
Artikel-Nr.
(part no.)
Benennung (designation)
Werkstoff (material)
Konstr. - Nr:Mikolp-200-001.
Blatt
(sheet)
Zust.
(index)
Änderung
(revision)
Datum
(date)
Name
(name)
Gepr.
Bearb.
Name
Datum
Maßstab (scale)
1
Alle Maße in mm
all dimensions in mm
Allgemeintoleranzen /
General tolerances
DIN ISO 2768 - mK
über 30 mm ±0,3
Ers.f.:
Erstellt
79853 Lenzkirch / Germany
MedizinTechnik
[email protected]
ATMOS Medizin T echnik GmbH & Co. KG
Ludwig - Kegel - Str. 12, 14-16, 18
Tel: [phone]
Fax: [phone]
www.atmosmed.de
Schutzvermerk DIN ISO 16016
-
27.03.3013 C.Reinhardt
1:1 -
Tasterfolie
060.0621.0
MODE
LED AFD
STROBO