Auriol HG00160A User manual

WRISTWATCH
Operation and safety notes
RANNEKELLO
Käyttö- ja turvaohjeet
ARMBANDSUR
Bruksanvisning och säkerhetsanvisningar
ARMBÅNDSUR
Brugs- og sikkerhedsanvisninger
MONTRE
Instructions d‘utilisation et consignes de sécurité
HORLOGE
Bedienings- en veiligheidsinstructies
ARMBANDUHR
Bedienungs- und Sicherheitshinweise
IAN 270525

GB/IE Page 5
FI Sivu 16
SE Sidan 26
DK Side 36
FR/BE Page 46
NL/BE Pagina 57
DE/AT/CH Seite 68

HG00160A/E
HG00160B/D

HG00160C
HG00160F
3
A
T
M
3ATM

5 GB/IE
WRISTWATCH
�Proper use
The wrist watch displays the time and date. It also
has an alarm and can be used as a stopwatch. The
product is not intended for commercial use.
�Description of parts
1Day of the week display field
2 START button
3Time field
4RESET button
5Second field / “H” indicator
6 MODE button
7Alarm symbol
8LIGHT button
9“A”/“P” indicator
General Safety
Instructions
KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR FUTURE
REFERENCE!

6 GB/IE
WARNING!DANGER
TO LIFE AND RISK OF
ACCIDENTS FOR INFANTS
AND CHILDREN! Never leave
children unattended with the
packaging material. Packaging material can
cause suffocation.
WARNING!DANGER TO LIFE! Batteries
can be swallowed, which can prove fatal.
Consult a doctor immediately if anyone
swallows a battery.
Never take the product apart on any account.
Improper repairs could cause considerable
danger for the user. Only let qualified people
carry out any repairs.
Battery Safety
Instructions
CAUTION! RISK OF
EXPLOSION! Never recharge the
batteries.
Have a spent battery removed from the
instrument immediately. There is an increased
risk of leakage.
Batteries must not be disposed of in household
waste.
Consumers are under a legal obligation to
dispose of batteries in the proper way.

7 GB/IE
Keep the battery out of the reach of children,
do not dispose of the battery in fire, do not
short-circuit it, and do not take it apart.
Failure to observe these instructions may result
in the battery discharging beyond its end
voltage, which poses a risk of leakage. If the
battery in your instrument has leaked, have it
removed immediately to prevent damage to the
instrument.
Avoid contact with skin, eyes and mucous
membrane. In the event of contact with battery
acid, rinse the affected area with plenty of
water and/or consult a doctor.
�Water resistance
This watch is water-resistant up to 3 bar in
accordance with DIN 8310.
Do not press any buttons if the watch comes
into contact with water.
3 bar water
resistant

8 GB/IE
�Replacing the battery
Note: Have batteries changed in a specialist
shop.
Have any repairs or battery replacements
carried out by a suitably experienced specialist
in order to avoid damaging the insides of the
watch.
Dispose of used batteries in an environmentally
compatible manner.
Do not dispose of the watch with the household
rubbish.
�Operation
Press the MODE button 6to set the desired
mode: Time mode > Stop watch > Alarm >
Setting the time > Time mode.
�Setting the time and date
1. Press the MODE button 6three times. The
second field 5and the day of the week field
1flash in the display.
2. Press the START button 2to set the second field
5to 0.
3. Press the RESET button 4to confirm your
setting. The minute field flashes in the display.
4. Press the START button 2to set the desired
minute value.

9 GB/IE
5. Press the RESET button 4to confirm your
setting. The hour field flashes in the display.
6. Press the START button 2to set the desired hour
value.
Note: Pay attention to the symbols A, P 9and
H 5in the display when setting the hour value.
A and P (A = a.m./P = p.m.) are used for the
12-hour time format. H is used for the 24-hour
format. Press the START button 2to set the
desired value and format. Press the RESET button
4to confirm your setting.
7. Press the RESET button 4to confirm your
setting. The date field flashes in the display.
8. Press the START button 2to set the desired date
value.
9. Press the RESET button 4to confirm your
setting. The month field flashes in the display.
10. Press the START button 2to set the desired
month value.
11. Repeat steps 8 and 9 to set the day of the week
1field. The names of the days of the week are
shortened as follows:
MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
12. Press the MODE button 6to enter the default
display.

10 GB/IE
�Lighting the display
Press and keep pressed the LIGHT button 8to
switch on the light.
Release the LIGHT button 8and the light will
switch off after approx. 3 seconds.
�Displaying the date
Press the START button 2while the watch is in
time mode. The date appears on the display.
Release the START button 2to return to time
mode.
�Setting the alarm
Press the MODE button 6twice to enter the
alarm mode. The hour field of the alarm time
flashes in the display.
Press the START button 2to set the desired
hour value.
Press the RESET button 4to confirm your
setting. The minute field flashes in the display.
Press the START button 2to set the desired
minute value.
Press the RESET button 4to confirm your
setting.
Press the MODE button 6to enter the time
mode.