Ballard Designs Giselle Bed UM146 User manual

PRODUCT NAME: Giselle Bed* King-Queen-Full
ITEM NUMBER: UM146/UM147/UM148 and UM177/UM176/UM175
ASSEMBLED DIMENSIONS: King- 56 1/2”H x 83”W x 90”D
Queen- 56 1/2”H x 63 3/4”W x 90”D
Full- 56 1/2”H x 59”W x 85”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 2/3/2023 Page 1 of 4
MADE IN USA
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
NOTE: Mattress, Bedding and Pillows not included. Sold separately.
*Tufted (illustrated) and Untufted Beds feature identical assembly process.

Page 2 of 4
NO TOOLS REQUIRED
-Two person assembly suggested
Legs (A)
Slats (B)
Headboard (C)*
Side Rails (D)
Footboard (E)
Ltr.
A 4
B 4
C 1
D 2
E1
Qty. Components
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
Lift Bed when moving.
Do not slide over floor surface.
PROTECT YOUR FLOORS
*Tufted (illustrated) and Untufted Beds feature identical assembly process.

Page 3 of 4
STEP 1: Attach Side Rails (D) to Headboard (C) and Footboard (E). Engage hooks and push
down to secure. NOTE: If necessary, gently tap down with a Rubber Mallet. PROTECT
FABRIC from mallet!
STEP 2: Insert, turn and tighten Leg (A) into center for each Slat (B).
(D)
(A)
(B)
(D)
(C)
(E)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
Lift Bed when moving.
Do not slide over floor surface.
PROTECT YOUR FLOORS
NOTE
Metal T-Nut faces up.

Page 4 of 4
STEP 3: Set each Slat (B) into place between Side Rails (D). Fit notch around each metal peg.
NOTE: If necessary, adjust Levelers on bottom of each Leg (A) to ensure contact with floor.
(B)
(D)
(D)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning and Care
Spot clean as needed.
Specific cleaning method varies by fabric type.
Assemble in location for intended use.

Scan this QR Code
to learn more
regarding
MATTRESSES
and how to choose one
for your new bed!
LEVELERS: Legs are equipped with Rotary
Levelers installed under each. If necessary,
adjustments may be made by turning Leveler
clockwise/counterclockwise.