Ballard Designs Louis MQ080 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10/22/2019 Page 1 of 4
PRODUCT NAME: Louis Metal Console
ITEM NUMBER: MQ080
ASSEMBLED DIMENSIONS : 26”H x 60”W x 19 1/2”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
Ltr.
A
B
8
1
Qty. Components
REQUIRED TOOLS:
Phillips Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
C 1
Legs
Shelf
Console Body
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
Wall Anchoring / Anti-tip Hardware Included
Installation Instructions on Page 4

Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: On a clean, level, soft surface gently lay Console Body (C) onto its back. Insert each Leg (A)
into T-nuts on underside and turn until firmly tightened.
(C)
(A)
STEP 2: Lift and place Console upright onto Legs and insert Shelf (B) into center compartment.
(B)

Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as
they can damage the finish. Dust with soft cloth.
Ltr.
D2
Retention Belt
Qty. Hardware Included
E5 Screw
F3
Bracket
ANCHORING HARDWARE (ANTI-TIP)
1. Locate and mark a Wall Stud behind console at location for installation.
3. To keep hardware out of view after installation, attach Bracket (D) INTO WALL STUD
with Screw (E) 2 inches below Ring attached to back of console.
4. Move Console into place, align Bracket and Ring then connect both using Retention Belt (F).
5. Confirm Belt is securely laced and locked.
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
WALL
STUD
WALL BRACKET MUST BE ATTACHED TO WALL STUD
(D)
(E)
(F)