Ballard Designs Andrews SL041 User manual

PRODUCT NAME: Andrews 60” Pedestal Dining Table
ITEM NUMBER: SL041
DIMENSIONS OF ITEM ASSEMBLED: 30”H x 48”Diam.
Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDONESIA
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6-12-2020

Page 2 of 4
Ltr.
A
B
4 Hexagonal Bolts
4Lock Washers
C 4 Flat Washers
D 1 Wrench
Table Top (E)
Base (F)
Qty. Hardware Included
Ltr.
E
F
1
1
Qty. Components
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
REQUIRED TOOLS:
Wrench (inlcuded)
-Assembly may require 2 people.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.

Align holes on the Bridge with hole in Base (F). Secure using Hexagonal Bolts (A), Lock
Washers (B), and Flat Washers (C). Fully tighten using Wrench (D).
STEP 2:
(E)
Page 3 of 4
STEP 1: Lay Table Top (E) upside down on a smooth, clean surface.
Remove pre-attached Bridge by unscrewing Bolts, Lock Washers, and Flat Washers
with Wrench (D).
RETAIN Bolts for STEP 3.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
Bridge
(A)
(B)
(C)
(D)
(F)
Bridge

STEP 4:
Page 4 of 4
STEP 3: Carefully flip Base (F) and align outer holes on Bridge with Holes on Table Top (E). Secure
using Bolts, Lock Washers, and Flat Washers collected in Step 1. Tighten using Wrench (D)
then carefully flip Table upright.
Note: Make sure all Bolts are fully tightened before turning Table upright.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
(E)
(F)
(F)
Bridge
LEVELERS Base is equipped with Rotary Levelers located under each corner.
If necessary, Table may be adjusted by carefully raising applicable corner and turning Leveler
clockwise/counterclockwise.
Cleaning and Care
Avoid harsh or abrasive chemicals as finish damage may result.
Use coasters, trivets, place mats to protect surfaces. Promply remove spills.
Dust with a soft, dry cloth.