Ballard Designs WS956 User manual

D 1
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10/30/2019 Page 1 of 5
PRODUCT NAME: Valet Shelf with Rod 24”or 48“
ITEM NUMBER: WS956
ASSEMBLED DIMENSIONS: 8 1/4”H x 24”W or 48”W x 14”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDONESIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
Ltr.
A 2
B
Anchor
Long Screw
Short Screw
2
C 4
D Set Screw
Allen Wrench
2
E 1
Qty. Hardware Included
Ltr.
Shelf (F)
Bracket (G)
Rod (H)
Finial (I)
F 1
G 2
H 1
I 2
Qty. Components
REQUIRED TOOLS:
Phillips screwdriver,
level, pencil and a power drill.
-Two person assembly suggested
NOTE: When unpacking, lay
the parts on a padded surface
such as the packaging provided.
Be sure to locate all hardware
before throwing away any
packaging.

Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(G)
(G)
(B)
(A)
(H)
STEP 1:
Insert Rod (H) through Holders on each Bracket (G).
STEP 2:
Position Brackets (G) on wall in desired location and mark screw holes with a pencil.
(SEE NOTE BELOW) Make sure marks are level. FOR MAXIMUM SUPPORT AT LEAST
ONE BRACKET SHOULD BE MOUNTED INTO A WALL STUD.
For screw holes not positioned over wall studs, drill pilot holes and use Anchors (A).
Using a screwdriver, secure Brackets to wall by screwing in the Long Screws (B) through
Brackets and into stud, or through Brackets and into Anchors.
STUD
(B)
POSITION BRACKETS TO ACCOMODATE ROD
If Brackets are postioned too far apart, Finials will not fit.
For 24” Shelf: Center Brackets no more than 16.5“ apart.
For 48” Shelf: Center Brackets no more than 33.5” apart.
NOTE

(H)
(E)
(D)
(H)
(I)
Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3:
Lock Rod (H) into place by inserting the Set Screws (D) into openings in back of
Holders . Tighten with Allen Wrench (E).
STEP 4:
Attach Finials (I) by screwing onto end of the Rod (H). Rotate clockwise until tight.

Place Shelf (F) on Brackets (G). Using a screwdriver, screw Short Screws (C) through
Brackets and into Shelf to secure it in place.
STEP 5:
Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(G)
(F)
(C)